Xiaomi first announced about Xiaomi Mi 10 Ultra on August 11, 2020, and it is available from August 16, 2020. The smartphone comes with four variants. If you have bought this device and still not received a new update on your device, then this guide is for you. Here, we will share all the latest China Stable ROM for Mi 10 Ultra (cas).
If you have not received any new update to the device recently, then follow up our guide on how you can check for the software update manually. To do that, head to the Settings -> About Phone and Tap on a Software Update to check for the new version for the Mi 10 Ultra.
Table of Contents
Xiaomi Mi 10 Ultra Device Specifications
Xiaomi Mi 10 Ultra comes with the latest 5G technology along with other GSM technologies embedded. The dimension of the smartphone is about 162.4 x 75.1 x 9.5 mm, and it weighs around 221.8 g. Build with Glass front (Gorilla Glass 5), glass back (Gorilla Glass 6), aluminum frame, and supports dual Nano-SIM cards.
It has an OLED touchscreen that supports 1080x2340pixels and 1B colors. Protected via Gorilla Glass, the display has 120Hz of refresh rate and 800 nits type brightness. The size of the screen is 6.67 inches, and the device runs on Android 10, MIUI 12.
Moreover, along with the Qualcomm SM8250 Snapdragon 865 chipset, the smartphone uses an Octa-core (1×2.84 GHz Kryo 585 & 3×2.42 GHz Kryo 585 & 4×1.80 GHz Kryo 585) CPU with an Adreno 650 GPU. However, there is no extra card slot for the SD card. Depending on the price the storage and RAM comes in four variants, 128GB 8GB RAM, 256GB 8GB RAM, 256GB 12GB RAM, 512GB 16GB RAM.
The rear camera has a quad-cameras, which are 48MP + 48MP + 12 MP + 20MP with Dual-LED flash, HDR, and panorama support. However, the main camera has only one camera of 20MP with HDR support. The common feature like WLAN, Bluetooth, GPS, NFC, Infrared port, and a USB are included.
The fingerprint sensor is located under the optical display, and other sensors like accelerometer, gyro, compass, etc are also embedded in the phone. Mi 10 Ultra has a Li-ion battery of 4500 mAh, which supports 120W fast charging, also wireless fast charging 50W.
Manually Check OTA Updates
Before moving to the guide, we recommend you to first check if the OTA is already available for your device manually. To do that, go to the phone Settings > About Phone > Software update. Additionally, you can perform this task via the Software Updater app directly. If the software version is available, you can grab it.
Firmware Details and Download
Recovery ROM | Fastboot ROM
Recovery ROM | Fastboot ROM
How to Install MIUI China Stable ROM for Mi 10 Ultra (cas)
Installing the stock ROM or upgrading the MIUI version on Xiaomi devices is comparatively easy. But you should follow all the pre-requirements and downloads below before proceeding.
- Supported for: Xiaomi Mi 10 Ultra (cas) only. The device should be running on stock ROM to apply the update.
- Requires: A PC/Laptop and a USB cable.
- Backup: Take a full Backup of Phone Data at first to keep the important files safe.
- Charge: Keep your device charged more than 50%.
- Mi Flash Tool – Download and Install it on your PC
- Download ADB and Fastboot Tools on your computer
- Download Xiaomi USB Drivers and install it on the PC
Instructions to Install:
We assume that you’ve followed the downloads and requirements properly. Now, you can proceed to install MIUI China Stable ROM on Mi 10 Ultra. Check out the guide link below along with a video tutorial as well.Guide to Install MIUI ROM on Xiaomi Device [Recovery/Fastboot]
You can check out our full-depth tutorial video as well:
We hope that you’ve updated or installed the latest MIUI version on your Mi 10 Ultra (cas) successfully. Feel free to ask in the comments below for any queries.