How to Install Stock ROM on X-TIGI V18 Pro [Firmware/Unbrick]

X-TIGI V18 Pro
Advertisements

In this tutorial, we will guide you on how to install the firmware flash file on X-TIGI V18 Pro. The device came out of the box with Android 8.1 Oreo and powered by MediaTek. If you are someone who is looking to fix your device’s common issues like boot loop, remove pattern lock, bypass FRP lock, repair IMEI, or extracting DA (download agent) file, then this guide is for you.

To install the firmware flash file on X-TIGI V18 Pro, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method simple and easy. We have also added video and step by step tutorial to make things easier to flash the firmware file.

X-TIGI V18 Pro Firmware File

Advantages of Stock ROM:

Here are the answers to why you need to download and save the X-TIGI V18 Pro Stock ROM flash file on your computer.

Advertisements
  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from X-TIGI V18 Pro
  • You can fix the boot loop issue on X-TIGI V18 Pro
  • Fix Unfortunately, the app has stopped error on X-TIGI V18 Pro
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot X-TIGI V18 Pro
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore X-TIGI V18 Pro back to Factory State
  • Bypass Pattern lock on your device

How to Flash X-TIGI V18 Pro Firmware File

Before installing the Stock ROM on your X-TIGI V18 Pro, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Download Flash Files

Software Details Download Link
Flash File Name: X_TIGI_V18_PRO_V04_01
Android Version: 8.1
Download Link

Instructions to Install: via SP Flash tool

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your X-TIGI V18 Pro, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your X-TIGI V18 Pro

Follow Complete Tutorial

Watch Video Tutorial

Advertisements

That’s it, guys. We hope that you’ve installed the Stock Firmware on your X-TIGI V18 Pro device successfully. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Previous Post
Mobicel Switch Go

How to Install Stock ROM on Mobicel Switch Go [Firmware/Unbrick]

Next Post
Xiaomi Mi Note 3

Download and Install CarbonROM on Xiaomi Mi Note 3 (Android 11 R)

Related Posts