Tesla brings a revolution in the electric vehicle industry for a couple of years featuring sustainable energy. Electric Vehicle is a great addition to the eco-green environment to avoid pollution as well as avoid using limited fuel resources like diesel and petrol. However, Tesla models do have large touchscreens to attract its customers or fans and avoid the dashboard with buttons. Meanwhile, some users report that their Tesla screen goes black while driving.
Tesla working actively to include multiple features, AI-related technology, safety features, etc. Whereas they eliminate the need for a dashboard with buttons for controlling media, volume, temperature, and so on. Although the on-screen dashboard or infotainment system works really well on Tesla models, sometimes you may find yourself unlucky to experience a blank screen issue while driving the car. Well, it can be frustrating and dangerous because you’re unable to see the speed and other necessary details.
How to Fix If Tesla Screen Goes Black While Driving
So, if you’re also one of the victims to encounter the Tesla screen won’t turn on issue then make sure to follow this troubleshooting guide completely to resolve it. As the Tesla’s screen allows you to see all the important details while driving the car, turning off the screen can be alarming in so many ways. It looks like that conflicts with the eMMC, temporary system glitches, an outdated system version, etc are one of the possible reasons behind the black screen.
Luckily, you don’t have to worry about it. Here we’ve shared a couple of possible workarounds for you to quickly fix this blank screen issue. So, let’s get into it.
1. Restart the Tesla EV
First of all, you should try restarting the Tesla EV manually to ensure there is no issue with the temporary system glitch. Some users did find this trick helpful.
- Park your Tesla vehicle in the parking area and all doors should be shut down.
- Now, go to Controls > Safety and Security > Power Off.
- Don’t touch anything like the brake, doors, steering wheel, touchscreen, etc for at least five minutes.
- Then you can press the brake or open the door to start everything back up again.
2. Power Cycle the Vehicle
The next thing you can do is simply perform the power cycle method on your Tesla EV to ensure the system works properly in fresh mode. Sometimes a normal restart might not come in handy and that’s why the power cycle can be useful enough.
- Park your Tesla vehicle in the parking area.
- Whenever the touchscreen works, just tap on .
- Next, wait for at least five minutes or so without touching the vehicle. Do not open the doors, touch the brake pedal, touch the touchscreen, etc.
- After five minutes, you can press the brake pedal or open the door to wake up the vehicle.
3. Hard Reset Tesla
The chances are high that you’ll need to perform a hard reset of your Tesla EV by following the steps below. It might help in restoring the Tesla vehicle to the default factory settings. To do that:
- Turn Off the Climate Control System > Fully open the driver’s window.
- Open the trunk and take out the under-hood storage unit or remove the top panels to access the battery.
- Now, locate and disconnect the 12V battery from the ground.
- Then insulate the terminal from the post to prevent contact.
- Next, disconnect the first responder loop > Wait for at least five minutes.
- Then reconnect the 12V battery ground again and reconnect the first responder loop.
- Replace the storage unit and close the trunk.
4. Check for Faulty eMMC
Tesla Model S EVs do have the faulty embedded Multi-Media-Card (eMMC) manufactured before 2018. It’s a known issue and Tesla agreed to extend the warranty to those affected vehicles. However, Tesla hasn’t made it official yet. Luckily, if you’ve tried every known workaround to fix the black screen issue but the problem persists then you can get a free repair on the touchscreen system if your vehicle meets all three following terms.
- Your vehicle has under 100,000 miles
- Has been on the road for less than 8 years
- Was built before 2018
5. Avoid System Overload
There is a pretty common issue that appears to the Tesla EVs recently that seems to do with the system overload and the touchscreen black problem is one of them. So, if your Tesla’s screen goes blank unexpectedly that means somehow the system overload or the overheating is causing such an issue. This specific issue happens whenever too many applications run on the car computer for the touchscreen to handle.
Any machine or technology can fail at times which is normal. So, your Tesla is no exception here because it runs on the software system which might have some issues or bugs etc. The power cycling method can fix this issue in most cases apart from a hard reset.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.