Fix: Beats Solo 3 Not Turning On or Off

Beats headphones boast excellent reliability and sturdy build quality, and Solo 3 is no different. The headphone offers impressive battery life of up to 40 hours. However, at times your Beats Solo 3 won’t turn on. While many Solo 3 users have complained that the device is not turning on, there are users on the other side of the spectrum who can’t turn off the headphones. If your Beats Solo 3 is not turning on or off, keep on reading this guide to discover the effective ways of dealing with the problem.

Beats Solo 3 not turning on or off

Beats Solo 3 is a popular wireless headphone with rich sound quality and up to 40 hours of listening time on a single charge. It can seamlessly pair with Android and Apple products. With support for spatial audio, you get an immersive music experience. You will be able to control the music and take calls using the headphones. Beats Solo 3 does have everything to be your music companion.

Why Won’t Your Beats Solo 3 Not Turn On or Off?

Several factors can contribute to your Beats Solo 3 headphones not powering on or off problems such as a faulty power button, malfunctioning battery, or other hardware damage. A faulty charge could also be held responsible for the issue. If not the hardware, the Beats Solo 3 software could have bugs or glitches, resulting in powering on or off issues on your headphones.

In the next section you’ll learn about different ways of fixing Beats Solo 3 not turning on or off issues.

Beats Solo 3 Not Turning On or Off? Here’s How to Fix It

If your Beats Solo 3 has issues with powering on or off, try these solutions until you find the one that works for you.

Solution 1: Charge Your Beats Solo 3

If your Beats Solo 3 is not turning on, probably it does not have enough power. To check this, press and hold the power button for a few seconds. You should find the power button on the bottom of the right earcup. If the LED indicator does not flash, the battery may be fully drained.

Connect your Beats to the charger and leave it there for at least an hour before you try turning it on again. If the device does not turn on thereafter, you need to try additional troubleshooting methods.

Solution 2: Restart Your Headphones

If your Beats headphones are still not powering on or off, there might be software bugs or glitches. Restarting your headphones is an effective troubleshooting step here. It can fix power issues on your headphones.

Here are the steps you need to follow:

  1. Press and hold the power button for 10 seconds. Keep the button pressed until the indicator light should turn off.
  2. Press and hold the power button again. Your phone will turn on.

If your Beats headphones were not powering on before, the above steps should have fixed it. However, if the problem persists, connect your Beats Solo 3 to the charger and hold down the power button for 20 seconds. Then, disconnect the charger and try powering on your Beats.

If you are among them who couldn’t turn off the Beats Solo 3, restart the device (steps given above) and check if the problem is fixed.

Solution 3: Reset Your Beats Solo 3

If the above solution did not work, try resetting your Beats headphones. It can resolve issues with powering on or off your Beats Solo 3.

Here’s how to do it:

  1. Press and hold the power button and volume down button simultaneously for 10 seconds.
  2. Release the buttons when the fuel gauge flashes.
    Your headphones have now been reset. You need to set it up again.

Solution 4: Update Your Beats Headphones Firmware

Your Beats headphones may not be powering off due to outdated or corrupted firmware. If you haven’t updated your Beats in a while, it may be running an older firmware, which could be causing the problem. Try updating the firmware on your Beats Solo 3.

  1. Connect Beats Solo 3 headphones to your Mac.
  2. Launch the Updater application.
  3. Select Status under the primary menu and select Beats Solo 3.
  4. Tap on Connect.
  5. Follow on-screen instructions to update your headphones.

To update Beats Solo 3 using an Android phone, go to Google Play Store and download the Beats app. Set up the app and it should send you notification whenever a firmware update is available for your Beats Solo 3.

Solution 5: Faulty Power Button

The power button on your Beats Solo 3 may be malfunctioning, not allowing you to power on/off the device. If your headphones are in use for a long time, it’s time to clean the dust and debris around the power button which could cause the button to malfunction. A loose power button could also be causing the problem.

To clean dust and dirt on your Beats Solo 3, we recommend WD-40 spray. Thoroughly spay the WD-40 solution around the power button. Now, press the power button 10-20 times for the solvent to reach under the button and clear out the unwanted particles.

Leave the headphones for an hour to dry and then check if the problem is fixed.

Solution 6: Replace the Battery or the USB Cable

Your Beats Solo 3 may not be turning on because the battery is corrupted. If you have been using the headphones for a long time, the battery health may be too low. It’s time to replace the battery. Not only it will make your Beats work, but you’ll also get better playback time.

Replacing the battery on Beats Solo 3 is an easy process. Here are the steps:

  1. Remove the lid on the right side of your headphone.
  2. Disconnect the battery by removing the connectors.
  3. Using a sharp tool, carefully pull out the battery. You will need to remove the adhesive tape at the bottom.
  4. Install the new battery in the same way and plug it into the slot.
  5. Install the lid.

Now, pair your Beats Solo 3 to another device and start listening to your favorite songs.

Solution 7: Contact Beats Support

If you have tried the above solutions but to no avail, contact Beats customer support. You can ask for free repair or replacement if your Beats Solo 3 is under warranty.

Apple will replace your Beats Solo 3 battery for free if you have Apple Care+ subscription and the battery capacity has dropped below 80%.

Final Thoughts

If you can’t listen to your favorite tracks just because your Beats headphones are not working can be painful. Fortunately, there are a few easy troubleshooting methods to recover your Beats Solo 3. We have mentioned them all in this guide.

Not being able to turn off your Solo 3 is also painful as the battery keeps on draining. You can try restarting and resetting the device to fix it. If both the solutions do not work, update the firmware.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.