10 Reasons Why BYD Seal Not Charging and How We Can Fix?
If you’re one of the unfortunate drivers of the BYD Seal vehicle and encountering the same kind of problem with the battery charging, then don’t be bothered. There are many potential reasons behind it. However, BYD is a popular and the world’s biggest battery manufacturer to construct buses, electric trains, electric cars, batteries, etc. But it can be irritating when you ca unable charge your electric vehicle anymore with the charger.
Here we have mentioned some common reasons behind the BYD Seal electric vehicle not charging issue:
- The charging station doesn’t support V2 supercharging with BYD Deal
- Faulty or damaged charger cable
- Electricity source conflicts
- System glitches ok the EV
- Input voltage is too high or too low
- Issue with the fuse box
- Physically, battery damaged inside the EV
- Hardware Defects
These were some common reasons why your BYD Seal electric vehicle is not charging when plugging it into the charger. It is a common problem encountered by many owners. Luckily, you can fix the issue by following the solutions that should come in handy. Make sure to follow all the solutions until the end, and you will be back to charging your BYD Seal vehicle again.
1. Restart Your BYD Seal Vehicle
If your BYD Seal electric vehicle is not charging anymore, then the first thing you have to do is restart your vehicle. Sometimes, system glitches can cause multiple issues, including the BYD Seal not charging. A simple restart will allow your car to get charged back. Turn off your electric vehicle and wait for a minute. After that, turn the car back on and then check whether the issue has been fixed or not.
2. Verify the Battery Life Cycle
It is necessary to check the battery life cycle of your electric vehicle. This is important, especially if the battery life cycle is completed after running the vehicle on a single charge and displays the low charge or does not indicate the charging status. This may leave you in a situation where you will get frustrated, especially when you’re on a long trip with your friends or individuals.
Therefore, it is possible that your electric vehicle battery life cycle is either finished or there’s an issue with the software conflict itself, causing the vehicle not to charge anymore. In that case, you must verify whether the issue is with the battery or something else. After that, you can take action regarding the issue you’re facing.
3. Check the Charging Port
You won’t be able to charge your EV if the charging port is physically damaged or due to a frozen port switch. Check whether the charging port on the vehicle is working in good condition. As mentioned before, the BYD Deal charging port uses AC and DC Intel ports, so you can try any ports to charge the vehicle. It is also vital to plug the charger correctly into the port whether you’re charging your car at your home or public station.
If the charging port is frozen, you must fix it using a hair dryer or high-voltage light. This will fix the frozen switch part due to excessive heat, and you cannot charge your EV again. If you have correctly plugged the charger and the EV is still not charging, then be sure to verify it. You can use the charging provider’s app or tap on the RFID card on the stall to start the charging session. After that, you must press a start button (in some charging stalls).
After that, you can see the status of your vehicle charging via the station’s screen, the instrument display, or the BYD mobile app. You can follow the next method if everything related to the charging port and its status looks fine.
4. Verify the Compatibility with the Charger
If your BYD Seal EV is still not charging with the charging stations or with the individual compatible charger, then you have to check the compatibility with the charger. Sometimes, the vehicle isn’t charging anymore, even with the charging stations, which will trouble you a lot. Therefore, any issues regarding connectivity or malfunctions at the charging station may cause charging issues with the vehicle.
Make sure to check whether the charger you’re using for your vehicle is compatible with it. However, you can test out the BYD Seal charger, which is a trusted and certified EV charger for your BYD Seal. You can buy the charging accessories for your vehicle online from the official EVSE website. The BYD Seal is compatible with all portable and wall-mounted chargers, as it comes with a portable charging cable.
If you want to charge the vehicle faster, consider a wall-mounted charger to reach the maximum 7.2 kW charger rate. In addition, you can charge your EVs at Tesla supercharger stations, but you have to pay them for that to charge the EVs, irrespective of the V2/V3 Superchargers.
5. Dead High-Voltage Battery
We suggest you check the battery of the BYD Seal electric vehicle to see whether it is working or dead. In most cases, the vehicle is not starting anymore and is not charging, which might happen due to a dead high-voltage battery issue. In such a case, you should hand over your BYD Deal electric vehicle to a professional mechanic or visit a service centre.
It might be possible that the input voltage is either too high or too low. In that case, you should consult with a technician, and they will provide you with the required voltage on the circuit breaker.
7. The Vehicle Doesn’t Recognize the Charger
Regarding charging and connection, dirt and other particles commonly enter the charging cable and port. Many users reported that their electric vehicles can no longer charge, and dust/moisture is a common cause for this. If the dirt and other particles accumulate in the port, your vehicle doesn’t recognize the charger you plugged in.
In such a case, it’s best to check for dirt/moisture on the charging port located on the right upper side of the wheel arch. This will ensure whether the vehicle can recognize the charger or not. Here’s what to do.
- On your electric vehicle, unplug the charging cable from the charging port.
- Then, close the charging hatch and check for dust/dirt particles on the charging cable and port.
- If you find the particles inside the port and charging cable, clean it gently.
- Once you clean the charging port and cable, re-connect it back to the vehicle.
- If the EVs start to charge, then a big kudos to you. But if they don’t, try a simple restart and check it back.
8. Damaged Fuse Box
Another common reason your BYD Seal electric vehicle is not charging is a damaged fuse box. Sometimes, the EVs don’t function correctly due to issues with the fuse box, and many users are unaware of this. Make sure to identify whether your vehicle’s fuse box is faulty. If it is, you’ll have to replace it instead of the whole motor.
Therefore, you can contact a technician or an expert to check the fuse box on your EVs. Plus, you can visit a service center to get it repaired if there’s an issue with the physical damage.
9. Vehicle Battery Damaged
Every device has an in-built battery that runs and functions correctly, and you know it plays a prominent role in the hardware components. Over time, when using any device, the battery gets damaged or even swollen, resulting in the charging not working. So, if your BYD Seal electric vehicle is not charging even after trying the above solutions, there might be an issue with the battery itself.
Make sure to check whether your vehicle’s battery is working or damaged. Nowadays, electric vehicles are the most popular because they run smoothly and have battery capacity, unlike petrol and diesel. But at a time, the vehicle’s battery can easily be damaged due to overtime usage. Therefore, every owner must check and identify the battery status. The same thing I recommended you to check the battery of your EVs.
If the vehicle’s in-built battery is damaged, you can’t charge the vehicle anymore, and even the engine will not start. To address the problem, you must replace the battery with a new one and ensure it is compatible with your BYD Seal vehicle. You can head to the technician or an expert to replace your vehicle’s battery.
10. Reach Out to Customer Support
Last but not least, at certain times, the BYD Seal and other electric vehicles may have hardware defects or manufacturing faults that can be delivered to you mistakenly. It can be quite irritating, but this can happen to anyone. But it can be noticed within the few days of driving. Whether it happens to you or not, and you are still having issues with the charging, you should contact customer support for further help. You can also visit the service center, and it should be easily fixed by their support team. Their team will take the necessary steps to repair or replace the vehicle, which usually depends upon the issue.
That’s it guys. We assume this article was helpful to you. You can leave your thoughts and questions in the comments section for further assistance.
