Fix: Huawei Watch GT Won’t Turn On

With the Huawei Watch GT, you get a decent fitness tracker disguised as a smartwatch. Although it might not fit all wrists, its GPS, durability, and long battery life make it a good outdoor workout companion. In developing Light OS for the Watch GT, Huawei has taken a risk, and even though it has advantages, it has downsides as well. There have been many instances where users have encountered bugs in their new Light OS.

Recently, there have been many users who reported that Huawei Watch GT won’t turn on even after it is fully charged. Well, that’s a common issue that users are facing, and that’s the reason why we are here. In this article, we have mentioned some of the common fixes that will surely help you resolve the error. So, let’s get started with the guide.

Fix: Huawei Watch GT Won't Turn On

Why Does Huawei Watch GT Not Turn On?

There is probably no smartwatch that does not experience this problem. However, there is something preventing the smartwatch from turning on. So, here are some possible causes are:

  1. It has run out of battery. When you take your watch in for repairs or upgrade to a new model, it usually happens after you have not worn it for a while.
  2. There is no provision for using the watch with a mobile phone. It may be difficult to connect your watch to your phone since the two devices use different frequencies.
  3. You do not have enough coverage to power your watch. Whenever you toggle between cellular and GPS mode, make sure you have accurate GPS settings.
  4. If your band is broken or stuck, you need to replace it. It may be impossible to turn on the watch if the band is too tight or too loose.
  5. It doesn’t seem like your smartwatch is charging. Be sure your charger is compatible with your watch. Smartwatches can typically be charged with most chargers if they come with an adapter, but not all models do.

How to Fix Huawei Watch GT Won’t Turn On

So, here are some fixes to resolve Huawei Watch GT won’t turn on issue. Therefore, let’s check them out:

Fix 1: Smartwatch Charging Cables & Ports Need to Be Cleaned

Clean the smartwatch’s charging port with clean cotton. In addition, make sure the end that connects to the watch, as well as the end that goes to the computer or adapter, is clean as well. In this way, dirt cannot obstruct the flow of charges. Once all these parts are clean, you can plug your smartwatch into the charger and see whether it works.

Fix 2: Turn On The Watch With a Force Start

It is recommended that you perform a hard reset on your smartwatch. It’s easy to hard reset, even for beginners. It will allow you to clear all the memory and processes running on your smartwatch after a hard reset.

Whenever you restart your smartwatch, it will automatically disconnect from the battery. There is no difference between hard resetting an Apple watch or a Wear OS watch.

Fix 3: Replace Your Current Power Outlet

You might not be getting power to your Huawei Watch GT because the battery is not charging, and this is why it isn’t turning on. To make your smartwatch work, consider replacing the power outlet with another that will charge the battery.

Fix 4: Plug Correctly

One of the most common reasons why Huawei Watches do not charge is that they are not plugged in correctly. Your charging cable should be aligned with the charging pins on your watch if you want to make sure it is connected to the rear end. Ensure the watch is unplugged and plugged back in after unplugging it from its charger. When charging your watch with a charging Dock, align the charging Pins with the charging port and gently press the watch into the port.

In case you are using a direct power cable, make sure you plug it into a power source. You need to align the charging pins with the charging port on your watch. Make sure the watch is securely connected and the change is taking place.

Fix 5: Check The Temperature

When the Huawei watch is placed in direct sunlight, it may overheat. Due to the possible overheating. Once it has become overheated, take it off the charger, place it in a well-ventilated area, and unplug it.

Whenever the temperature drops, plug it back into its charger and check that it is charging again. Wearables should be charged at temperatures of 20 to 35 degrees Celsius.

Fix 6: Check The Power Source

Power sources need to be checked to make sure that they provide electricity. Huawei watches may not charge if their wall sockets are defective, which is why the watch won’t turn on in some cases, as it is not charging. Also, be sure to turn the circuit breaker. Nonetheless, the wall socket might be the problem. If you want to ensure that your watch is charging, you should charge it from a new source.

Fix 7: Damaged Circuit Board

It is necessary to access the firmware on the motherboard to operate most of the watch’s features. There may be a problem with the circuit board connections or the ROM chip in some settings that does not detect touch.

In cases where the screen is not responding to gestures, the motherboard must be damaged and must be replaced. To replace a circuit board, contact a professional.

Fix 8: Perform a Factory Reset Huawei Watch GT

When the software glitch hasn’t been resolved, and Huawei Watch GT won’t charge, it’s advisable to reset it. If these glitches are removed using a factory reset, it may be possible to restore the system to its original state. Whenever your watch slows down, lacks storage, or has other software problems, you can reset it. To reset your Huawei Watch, follow these steps:

  1. IUnitially, go to the Settings Menu on your watch.
  2. Under System, tap Reset or Settings.
  3. Go to the System & Update.
  4. After that, tap Reset.

So, that’s all we have for you on how to fix the Huawei Watch GT won’t turn on issue. It is our hope that this guide has been helpful to you. Meanwhile, if you need more assistance, please comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.