Fix: Poco X3 Pro Audio/Sound Not Working

Imagine you are about to watch a movie or that particular favorite episode of The Office US and there’s no audio/sound from the speaker. Another use case scenario will be no audio during calls which is annoying as it can get. What to do? Turns out the Poco X3 Pro sound/audio not working issue isn’t new and there are many reports from users advocating it which means it exists. After research on how to fix it, here are 10 troubleshooting methods that you can use to troubleshoot the problem to revive audio/sound from the speakers before walking to a service center.

Fix: Poco X3 Pro Audio/Sound Not Working

Restart the phone

What’s a better way to fix a problem than restarting the phone to kill any processes and try to fix the issue likewise. Turns out restarting a smartphone kills all the apps, processes, deallocates resources, and gives your phone a breath of relief along with fixing minor software glitches that happened before a reboot. This is a proven troubleshooting method that works for many issues so why not try it for the speaker issue assuming it is a software issue. Ignore if you already know it is not a software issue.

Check volume settings

You get volume settings for music, sound, alarm, and whatnot. It is quite possible to lower the music or sound volume without realizing it. Since other volume settings are already at the maximum, you might feel that the music/sound volume is all jacked up. This causes the speaker to produce extremely low or no sound at all. Toggle the volume settings to the maximum and check again.


Do Not Disturb (DND) Settings mutes all sounds coming from the speakers be it for music, alarm, notification, and so on. This means even if you are playing a video, the video plays but there’s no audio. Similarly, there won’t be any sound for notifications be it for calls or messages, and no sound for music too.

Simply drag down the notification panel and tap on the DND button to turn it off. You can even reboot the phone after disabling DND just in case. Check if this method works.

Disable headphone mode

Note that this works when the phone is stuck in headphone mode and the sound is only audible when a headphone/earphone is connected to the device but not via the loudspeaker. This is a bug and a simple fix will resolve it. Here’s how.

  • Go to the Google Play Store and download Disable Headphone.
  • After installation, the UI shows two options: “Speaker Mode” and “Headphone Mode”. You have the white button at the center to drag it to “Speaker More”.
  • Bingo, it is done.

Muffled Sound

The sound blasting from the speaker on your Poco X3 Pro should be mind-boggling but if sometimes, it could be muffled. Turns out dust, lint, and other debris can obstruct speaker vents and muffle the sound. It means your speakers will not be performing to their optimum and thus, it will require cleanup to improve the sound quality.

You can use compressed air to blow off excess dust or debris. You use a toothpick or a needle to scrape off excess dust or crumbs. You can also use a vacuum cleaner set on the lightest settings to clean the speaker grilles. Beware since pricking into the speakers can puncture the internal parts of the speaker and cause more damage than good.

Water damage

Water damage or liquid damage is one of the biggest reasons why a speaker on a smartphone would malfunction. If that’s the reason, you have some things to follow trying to resolve the issue.

First up, try to dry off the phone by using a blower or use a bowl of rice to suck out excess moisture. Talking about the speaker specifically, use the Speaker Cleaner app that produces a certain frequency and vibrates to unclog the speakers and pump excess water out of the grilles. This may not work for all the devices out there but it will be helpful for some at least.

Update the software

In case if the underlying firmware is at fault, you need an upgrade. Unlike other brands, Xiaomi (which owns Poco) rolls out updates every week or so even for entry-level phones, let alone the midrange Poco X3 Pro. This means you will have an incoming update on your plate waiting to be grabbed and that is where you can use it to fix the Poco X3 Pro audio/sound not working issue assuming that it was caused by a software issue to begin with.

  • Firstly, tap on the Settings app on your Poco X3 Pro.
  • Next up, scroll down to find About Phone and tap on it to open.
  • Now proceed to System Update and tap on the Check for Updates button.
  • The system will check for any incoming updates and notify if there is an update, download, and install.
  • Restart the phone and check if the speakers are working properly or not.

Pull off a restore factory

This is probably the last thing you can do to fix any issue on the software front. Here, I am talking about deleting all the data of the device so a backup is a must beforehand. Here’s how you can do it.

  • Firstly, switch off the phone.
  • Press on the Power plus Volume Up buttons simultaneously for a few seconds until the Mi logo shows up on the screen.
  • Now, you need to restore the factory. Use the volume rocker to change the options while the power button does the selection.
  • Go to “Wipe data/ factory reset >> Yes — delete all data”.
  • Once the process is over, select “Reboot system now” and it is done.

Probable hardware issues

If it’s not software, it has to be a hardware issue that needs to be dealt with professionally. This can include liquid damaged speaker, shaken or broken speaker wire, damaged speaker unit or defunct or malfunction to the speaker can cause hardware damage. Physical damage after a fall or slip on the floor can cause speakers to suffer issues including but not limited to dull sound or no sound at all. For anything related to the hardware, you will have to walk into a nearby service center. More about it in the next section.

Reach out to a service center

You can tweak the software part to resolve sound/audio related issues, however, the hardware part is something that I wouldn’t recommend you to take part in unless you know exactly how to unscrew bolts and open the back panel to reveal the motherboard and sew it back as it was. Doing so will void the warranty as well. A service center is a place where you will get professional technicians to diagnose the problem and advise a fix, repair, or even replacement of the speaker or other related component causing the audio-related issues on your Poco X3 Pro.

Note that you have two options here – an authorized service center or a local service center, although I would incline towards the former but you can go to the latter but void the warranty.


  1. My phone’s two speaker is not working. After few days my phone’s front camera, firinger print and Bluetooth are also not working.

    1. My Poco x3’s sound works. When the software update 13.0.1 also stopped working to pick up the sound

  2. My poco x3 sound is not working. After the software update to 13.0.1 the sound stopped working.

  3. Intially my phone’s front camera stopped working. And now the speaker is not working. Really wasted my hard earned money buying Poco X3. Much disappointed. Please don’t update the software inorder to make us buy a new one. It should not be called as a update rather it’s a downdate…

    1. hey even im facing the same problem. Do your phone also gives some strange sound while trying to rise the volume

  4. It’s due to heat how many left your phone in your car on a hot day? Or in direct sunlight and got the temp warning?

  5. Very very worst product POCO pls Don’t buy it. I have facing lots of problems speaker issue both the speakers at the same time .
    Sometime unable turn on .
    This poco x3 is very very worst product don’t buy pls

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.