How To Fix Gigaset Water Damaged Smartphone [Quick Guide]

Did you accidentally dropped your phone in water while using it in the washroom or clicking pictures on a beach or in a pool? Well, this calls for a Gigaset water damaged smartphone and historically, treating and repairing a phone damaged due to water isn’t that easy. There are a number of components inside a smartphone circuitry which has varying degrees of sensitivity to water and since water can actually travel even in the tiniest cranny, it is surely going to damage that specific component based on the severity of the water penetration. We get a plenty of requests from readers on how to fix a water damaged smartphone and therefore, we have created a list of to-do’s and not-to-do’s that will help you in the endeavor to try and retrieve a Gigaset water damaged smartphone and in fact, any other Android smartphone.

How To Fix Gigaset Water Damaged Smartphone [Quick Guide]

What are the things you aren’t supposed to do?

That’s an intelligent question. The thing is, a water damaged smartphone has a slim chance of retrieval and therefore if you happen to do the wrong things, it can cause more damage than the actual dunk or dip into the water did to the smartphone. Therefore, here’s everything you shouldn’t do.

First thing is that you should try to turn on the phone if it’s turned off and similarly, don’t attempt the plug in the charger which could cause a short circuit. Further, you mustn’t try to press any buttons and not even the fingerprint reader, as well as refrain from shaking, moving, or wobbling the phone too much as the movements, can allow the water to escape into the internal assembly where all the components are soldered if it isn’t already there. Next thing to keep in mind is that you mustn’t try to touch or dab on the display as well as anywhere on the device.
Further, try refraining from using air dryer or blower, vacuum cleaner (for now) in an attempt to suck out or evaporate water as something like this can hurt the internal components at this particular moment.

What should you do to fix the Gigaset water damaged smartphone?

Assuming that you have understood all the things you shouldn’t do, let’s concentrate on things that you should do in actual in an attempt to fix a water damaged smartphone.

Take it out of the water

Well, isn’t that obvious. You need to take out the phone off the water and you should do it pretty quickly and in fact, every second count here. You need not panic and simply remove the phone out of the water immediately and keep the phone on a dry surface.

Wipe off the phone

Without moving or disturbing the water which is still lodged inside the phone, take a paper towel or a microfiber cloth or any dry cloth for the sake of wiping off the exterior of the phone without wobbling it too much.

Dismantle and wipe

Next step is to remove the back panel, memory card, SIM cards, back cover, etc and use a paper towel or a cloth to dab and dry off these accessories. Most importantly, try to soak water off the exterior of the phone in order to elevate the chance of revival. Use a piece of cloth, rolled up to the size that fits into an audio jack and wipes off the jack as well as other orifices. Now, once you have wiped off the exterior of the phone, proceed to the next step.

Use a vacuum cleaner to suck out water

Now, you can use a vacuum cleaner set on a light or low setting but refrain from using air blower, dryer, etc. Point the hose of the cleaner towards the ports as well as the surface of the phone both front and back.

Using rubbing alcohol

This particular method isn’t for everything since it requires the user to know how to dismantle the phone by unscrewing the Phillips heads as well as put everything back in its place and screw it up in a perfect working condition. If you are someone who has the knowledge to do the same, you can dismantle the phone and rinse the circuit and other components (check for sensitivity) with rubbing alcohol which is also known as isopropyl alcohol. It will remove all the dirt, residue, corrosion thereby wiping off all the foreign elements completely.

The usual ziplock bag method

One of the most versatile and effective way to soak water from the phone as well as the moisture is using a ziplock bag, filling it up with uncooked rice or any other water absorbent like silica gel litter and put the phone in the bag and zip it and keep it for 2 to 3 days without disturbing it. You need to make sure that the phone stays inside the bag for the aforementioned duration only after which, you can take it out.

The big revelation

After two to three days, now it is the time to take out the phone from the ziplock bag. Now, when you try to power it on, there will be several cases wherein the phone starts or it doesn’t. If your phone is lucky enough, it will start immediately or after several attempts. On the contrary, if it didn’t start, try plugging in the charger for several minutes the battery could have drained. But even if this doesn’t help the cause, you need to take it to a service center and get it repaired.

Reporting the issue to a service center

Can’t revive the phone? There’s always a slim chance that the phone will turn on after getting blasted with water and therefore if you fail to revive it, you must take it to a service center and get it jigged and fixed. Note that smartphones with IP ratings are covered in water damage warranty but it differs from region to region and thus, proceed to an authorized service center to know if it is covered in warranty or if you will have to bear the charges, etc.

What should you do to prevent water damage henceforth?

There are several precautionary measures that you can take to prevent such a fate. You can refrain from using the phone near the beach or in a washroom or somewhere there’s water. You can use a temporary ziplock bag that prevents the phone from splashes of water during rain. Further, you can also buy a water-resistant cover or case that will provide a 360-degree protection against water. Further, you can buy a smartphone with a water-resistant coating with respect to IP standards which are more secure than those lacking such certifications.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.