What is Last Epoch Error Code LE-61 and How to Fix It?

Last Epoch is one of the most anticipated ARPG titles of recent times, and for people who are fans of Diablo 4, this was an obvious choice. However, this online game has its fair share of woes. Ever since the day of the launch, an error code named LE-61 has been troubling gamers worldwide without any proper solution or fix. Yes, the error shows up relatively less now compared to previous times. But it still causes issues for some users from time to time.

This error code is not related to any region as well. The Last Epoch LE-61 ‘Failed to Matchmake’ error code appears in any area or server. This error code suddenly springs up without warning, putting the player out of the gameplay. So here in this article, we will go through everything you can try to fix the problem. Now, without any further ado, let’s get into it.

What is Last Epoch Error Code LE-61 and How to Fix It?

What is the Last Epoch Error Code LE-61, and how do you fix it?

It is reported that this error message typically shows up when you try to switch from one map to another the most. But that is not the only time you might see it. Generally, when there is server maintenance, you might see this error code. But again, sometimes it is just a simple connectivity issue from the user end causing the problem as well.

Reset your connection:

More often than not, Error code Le-61 is quite common when there is network inconsistency. In such a scenario, a simple reboot or reset of the networking device is enough for the fix. Initially, it is better to reboot the network device first. If that does not do the trick, then go on and reset the device.

Rebooting the device will reboot the network connection, and no custom settings will be changed due to this reboot. To reboot a modem or router, turn off the switch to the plug point where the router’s port is connected. Keep it off for a minute, then turn it on again. Remember to keep it off briefly, as it will drain the capacitors. You can even remove the cable from the power port and keep it disconnected for a minute. Now turn it back on and see if the same error occurs.

If it does occur, then now try resetting the router or modem. However, this will clear out all custom settings you have set on your network, including login information. To perform the reset, find a tiny pointy object like a safety pin or a toothpick. Find the reset button at the back of the router and use the small pointed thing to press it for 10 seconds. You will see all the LEDs at the front blinking, which means the reset was successful.

After this, set up the connection again, like you did the first time, and see if the same error reappears.

Check your connection:

If there is any inconsistency with your internet connection, that could be the cause of your problems. Maybe your ISP has some limitations or blocks in place regarding the game. Or perhaps your internet connection is just not strong enough.

Bring the router closer to the device where you are accessing the game. You can even connect the router to your PC via a LAN cable using a laptop. A wired connection is far more stable than a wireless one. You should also contact your ISP and inform them about your problem. They should be able to provide resolutions to improve your connection speed.

You need to check whether all the cables for your connection are in place. You also need to check whether you have a good internet plan. Sometimes, our internet plan runs out, and we are unaware of it. So try playing other games using the WiFi in your house, and check whether they work well.

Try the next solution if the Last Epoch still shows the error message.

Disable security application:

Ensure that you do not have an antivirus or firewall application in the background of your PC or console blocking access to certain services of Last Epoch. This is common with antivirus applications that aggressively block out network traffic from unknown or untrusted sources. So, if you are using any such application, disable it entirely or uninstall it from your system if it is not essential.

You can also try including the game in your current antivirus exclusion list of applications. It will turn off internet protection for the last Epoch. If you are unsure how to add your application to the exclusion list, you can turn off your Antivirus or uninstall it.

To uninstall the Antivirus, follow the below steps:

  • Press and hold the Windows Key + I, and it will open the Windows settings.
  • Now click on Apps, and it will show you the list of all the installed applications on your system.
  • From this list, find your Antivirus, and once you find it, click on it and choose Uninstall.
  • After the uninstallation is done, restart your computer.

Yes, uninstalling seems a bit too much, but check if uninstalling the Antivirus works for you. If it does, you know the culprit behind your connectivity issues. After that, install another antivirus that does not have similar problems.

If this solution does not help, try the next solution.

Disable VPN or Proxy :

Regardless of your VPN client or proxy, Last Epoch can detect whether the connection is authorized or unauthorized. So, if you have proxy server settings for your connection or are using a VPN client while connecting to the Internet, try turning it off. After disabling the proxy or VPN, the Last Epoch should run fine on your system without the LE-61 error.

Steps to remove proxy:

  • Press the Windows key + R and open up the Run dialog box. Here, enter “ms-settings:network-proxy” and hit enter. This will open up proxy settings on your PC.
  • On the right side, look for the option that reads “Manual Proxy setup.”
  • Inside this setup, look for the option” Use a proxy server” and uncheck the box next to it.
  • Click on OK and then restart the system.

After the successful restart, reopen the Last Epoch and check if the error occurs.

Steps to remove VPN Client:

  • Press and hold the Windows Key + R buttons and open a Run dialog box.
  • Enter “appwiz.cpl” in that dialog box and press the enter button.
  • This will open up the Program and Features list. From the list, look for the VPN client that you currently have on your system, right-click on it, and select Uninstall.
  • After uninstalling the VPN client, restart your PC and check if the Last Epoch works.

Verify The Integrity Of Game Files:

You can check the files of your game directly from Steam. For this,

  • Open Steam and go to the library.
  • Right-click on Last Epoch and click on properties.
  • Click on the tab local files, and click on the button “Verify integrity of game files.”
  • Wait till the verification is done and see if there is an issue with your game files.

If any missing file report shows up, reinstall the game, and if nothing comes up, move on to the next fix.

Check server:

Online games are not free of bugs, as occasionally, issues will creep up into the game. The developers sort these issues out by performing a routine maintenance update on the game’s server. This maintenance update will mean that the players connected to the server under maintenance will face difficulties joining in. So you have to check whether the error you encounter is due to this. If there is server maintenance, the developers will put word about it on several social media handles. So, if you see any such update on their handles, you can be sure that you are not the only one facing the LE-61 error message.

In such a scenario, you can only wait until the game developers complete their fix on the servers. It usually takes only a few hours, and you should be able to play again after a few hours. If even waiting two days did not do you right, the issue is with your system or connection. In that case, try the solution mentioned below.

Disable unnecessary network adapters:

Suppose you have multiple network adapters installed on your system; that could also be the reason for your error. In that case, This is because two network adapters working together usually conflict with each other’s actions, resulting in an inconsistent network connection. So, if you have multiple network adapters enabled on your system, you should try disabling the ones that are unimportant to you. This will probably solve your network issues with the Last Epoch.

  • Press and hold the Windows Key + R, and it will open the Run dialog box.
  • In that box, enter “ncpa.cpl” and press Enter.
  • This will open up the Network Connections tab. In the network connection window, you will see the list of all the network adapters on your system.
  • Identify the network adapter that is taking care of your network connection. You can determine which one it is by looking for a small signal icon below the network adapter.
  • Besides that, disable all the other unnecessary ones. To do that, right-click on any of these network adapters and choose Disable.
  • You will see User Access Control asking for permission. Grant the permission by choosing Yes, and the disabling will be done.
  • Do this for every network adapter that is unnecessarily there in your system. And after you are done, restart your entire system.

Now try launching Last Epoch and see if the LE-61 error is resolved. If you still get the error message, then try the next solution.

Uninstall recent Windows Update:

Windows updates are not new to bugs. Now and then, when there is an update on the rollout, we also get a fair share of bugs with it. These are taken care of eventually, but until then, things remain unpleasant for many users. There have been reports that many players face connectivity issues after a recent Windows update. This was common with Windows 10 and Windows 11 users. So, if this scenario seems similar to yours, you will have to uninstall the latest Windows update installed on your system. You will probably get an update that will not have this issue later. So, if you are worried about using an outdated version, you should not worry. Later, you will receive a bug-free Windows update that will work correctly and not cause issues with the Last Epoch.

To uninstall the latest Windows update,

  • Press and hold the Windows Key + R, and it will open the Run dialog box.
  • In that box, enter “ms-settings:windowsupdate” and press Enter.
  • This will open the Windows Update screen in your Windows settings.
  • Then, you will see the View Update History option. Click on it.
  • After that, you will see a list of all the recently installed updates. Find the one that was installed most recently.
  • Once you find it out, right-click on it and choose Uninstall. If User Access Control asks permission, grant it and complete the uninstallation.
  • Now download the latest version of the Microsoft Show or Hide troubleshooter tool.
  • Now load the troubleshooter and choose the Advanced options by clicking the Advanced button.
  • Check the box next to “Apply Repairs Automatically” and click Next.
  • Then choose the option. Hide Updates and check the box next to the update you want to hide. This will make the update invisible to your system, and it will not try to install that update automatically. Most people know that Windows updates on their own. So, hiding the update is necessary if you don’t want your system to download that uninstalled update automatically again.

Now check if the uninstalled update solved your issue. This has fixed the problem for many Windows users. However, if this did not do the trick, move on to the next fix.

Quit and log in again:

As simple as it may sound, sometimes all a game needs is a simple restart. The Last Epoch LE-61 error message shows up when you play the game online and switch between locations in the game.

So log out of your account from the game and quit the game entirely on your device. You should then close the Steam application completely. After this, restart your system. After the restart is complete, relaunch Steam and open the Last Epoch. Then log in to your account in the game and check whether the error message shows up again or not. If it does, move on to the following given solution.

Select a different server:

Generally, when you launch the game, it automatically launches using the server that has the best ping at that moment in time. But if you feel the game is switching to a server with a high ping, you can even manually select a server for your gameplay in the game’s login menu. So choose the different servers and check whether one works for you.

Irrespective of what server you use, if you see the LE-61 error reappearing, move on to the following given solution.

Flush DNS:

Flushing the DNS cache has done the trick for some users of Last Epoch. It would help if you also gave it a try.

  • Click on the Start button.
  • Search for Command Prompt, and once you see it in the results section, choose Open as Administrator.
  • In the cmd window, enter the command “ipconfig /flushdns” and press Enter.
  • Wait till the process is complete, and then relaunch the game.

Run the game in offline mode:

If none of the solutions mentioned above worked for you, then as a temporary solution, you should start playing the game in offline mode. You should see this server-related error code if you are playing in the offline mode.

  • Open Steam library.
  • Right-click on Last Epoch.
  • Click on the gear icon on the game page.
  • Select Properties.
  • Open the General tab, and from the drop-down menu under Launch Options, choose the option “Play Full Offline.”

Do keep in mind that to play the game offline, you also need to create a character in offline mode. You cannot just use the character from online to offline.

So these are all the solutions to fix the Last Epoch LE-61 error. If you have any questions or queries about this guide on fixing online errors in the Last Epoch, comment below, and we will get back to you. Let us know which selection in this list fixed your issue. Also, check out our other articles on iPhone tips and tricks, Android tips and tricksPC tips and tricks, and much more for more helpful information.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.