The Elder Scrolls V Skyrim is one of the most popular action-driven games out there. And the main reason behind its popularity is its fantastic graphics and visualizations. From campaigns to open worlds, you will find various modes in the game that you can try to kill your free time. Above all, the best part is that it is compatible with almost all the platforms including Xbox 360 Windows and PlayStation 3.
In this post, we are going to share the best The Elder Scrolls V Skyrim PC Consoles Command Cheats. So, without any further delay, let’s get straight into the topic.
Also Read
Page Contents
How to Enter Cheat in the Game?
Before going through different cheat commands, it’s important for you to know how and where to enter them. The process is very simple, just press the tide key (~). It will bring the command console. Now just enter any of the below-mentioned cheats and enjoy the game.
The Elder Scrolls V Skyrim PC Consoles Command Cheats
Here’s a list of all the Skyrim console commands that you can enter in the game.
Player Related Console Commands
| TIM | It is used to enable or disable the immortal mode in the game. The character will not die even taking damage. |
| tgm | It is used to enable/disable the god mode in the game. It provides infinite health, magicka, and stamina. Plus, the character being overweight doesn’t affect character movement. |
| kill | It is used to kill a character instantly. However, it only works on non-essential characters. |
Money Cheats
| player .additem 00000f 200 | It instantly adds 200 gold to your inventory. You can add as much gold you want just by replacing “200” with the number of your choice. |
Commands for Non-Playable Characters (NPC Commands)
| Resurrect <#> | This command is used to bring back a dead NPC aka to life. For instance, Resurrect <1> will resurrect NPC with all items. Not adding the “number” will remove the corpse and create a completely new version of a nonplayable character. |
| removeallitems | It takes all the items from the set inventory. |
| additem <ItemID> <#> | You can use this command to add an item to the set inventory. |
Change Different Skyrim Commands
| rm | It is used to quickly change the run mode to walk, and vice versa. |
| tg | It is used to activate/ deactivate grass in the game. |
| tt | It is used to activate/ deactivate trees in the game. |
| tws | It is used to activate/ deactivate the water display while you are not in the water. |
| twf | It activates/deactivates the framework border. |
| ts | It activate/ deactivate skybox and fog effects. |
| tfow | It activates/deactivate unexplored areas in the game map. |
| TLL | It is used to change settings of different levels. |
| teofis | It activates/ deactivates the blur settings |
| tscr | It activates/ deactivates script processing |
| TCL | It activates/ deactivates the clipping of targetted item. |
| tm | It activates/ deactivates interface menus. |
| tfc | It activates/ deactivates the free-flying camera. |
| TAI | It activates/ deactivates artificial intelligence. |
| TCAI | It activates/ deactivates combats AI. |
| TDetect | It activates/ deactivates AI detection. |
| tc | It activates/ deactivates controls of a NPC |
| tmm | It activates/ deactivates map markers. |
| equipitem <itemID> <#> <left/right> | Makes the target equip any item from the inventory. |
| Equipspell <SpellID> <left/right> | Makes the target equip any shell. |
Items Commands
| Unequipitem <ItemID> <#><left/right> | Unequip any item target is carrying. |
| setessential <BaseID> <#> | It is used to decide the mortality of the target. <0> stands for the mortal. <1> stands for the immortal. |
| Disable | Makes the target invisible in the game. |
| Enable | Makes the target visible in the game. |
| MarkForDelete | It permanently deletes the target item from the game. |
| setownership | It helps in taking ownership of an item from the target character. |
| unlock | Helps in unlocking a door or a chest. |
| lock <#> | Helps in locking a door or a chest. The “#” stands for the difficulty level of the lock. You can set it between 0 to 100. |
| removeallitems | Helps to temporarily remove the target item from the inventory, |
| sexchange | It helps in changing the gender of the target NPC. |
| additem <ItemID> <#> | Helps to insert items into a set inventory. |
| setscale <#> | Helps to change the scale of the target object. But note that, if haven’t selected anything then it will change your scale. |
| moveto player | Use this command if you want to call an NPC near you. |
| player.setrelationshiprank <RefID> <#> | Use this command to toggle between the relationship of the NPC and the player. Replace “#” with a number between 1 – 4. Higher the number, the better the relationship. |
| openactorcontainer <#> | Use this command to access the inventory of different NPC. Different NPC carries different items along with them. You can change the “#” with numbers between 1 to 4. Here’ the number represents the actor’s rank status. |
| GetPos <axis> | Use this command to hand over the position value to the set target. Here’ change <axis> with either “x, y, z”. They represent the axis. |
| SetPos <axis> <#> | Use this command to determine the position value of a target. |
| GetAngle <axis> | Use this command to hand over the rotational axis of the target. |
| SetAngle <axis> <#> | Use this command to determine the rotational axis of a target. |
Quest Commands
| player.unlockword <shoutID> | This command helps to unlock a dragon shout which players can use in the game. |
| Addshout <ShoutID> | This command helps to insert a shout to the character skill set. However, the player need to first unlock the shout. |
| SetPlayerRace <Raceid> | This command helps to change the race of the player. |
| Player.SetRace <RaceID> | This command helps to set custom race. For instance, you can take the dragon race by putting DragonRace in the place of RaceID |
| fov <#> | This command is used to set the viewpoint of the player. You’ll have to replace “#” with the field of view you want. It can be between 75 to 160. |
| player.sqs <quest id> | This command displays different stages of a quest. |
| GetStage <QuestID> | This command displays the current quest stage. |
| SetObjectiveCompleted <QuestID> <stage> | This command helps to set a quest stage. “1” helps to set. “0” helps to unset. |
Player Commands
| sucsm <#> | This command helps to adjust the speed of a free-flying camera. By default, the speed is set to “1”. Replace “#” with “2” to double the speed. And replace “#” with “0.5” to half the speed. |
| animcam | This command helps to change the camera angle without troubling the character’s direction. |
| SetStage <quest id> <stage value> | This command helps to adjust the quest to a specific stage. This command mainly helps to fight any quest glitch. |
| movetoqt <QuestID> | This command helps to move your character to a character related to the quest. |
| showquesttargets | This command helps to display all the available quest IDs. |
| caqs | This command helps to go through all stages of every quest. |
| CompleteQuest <QuestID> | This command helps to complete a given quest instantly. |
| s1st | This command helps to display the character’s arm next to your character. |
| showracemenu | This command helps to display magicka, stamina, and health in of the character in the menu. |
| player.addperk <PerkID> | This command helps to insert a certain feature into the character. |
| player.removeperk <PerkID> | This command helps to remove a certain feature from the character. |
| player.addspell <variable> | This command helps to add different spells, diseases, or abilities to the character. |
| Player.removespell <variable> | This command helps to remove different spells, diseases, or abilities from the character. |
| player.additem <ItemID> <#> | This command helps to add item to the inventory. |
| player.removeitem <ItemID> <#> | This command helps to remove items from the inventory. |
| player.drop <ItemID> <#> | This command helps to drop items on the ground. |
| player.showinventory | This command helps to display all items in the inventory. It is also used to display itemID codes. |
| player.setcrimegold <#> <FactionID> | This command helps to insert a certain amount of gold into the bounty. |
Other The Elder Scrolls V Skyrim PC Consoles Command Cheats
| IncPCS <AVskill> | This command helps to enhance the skill point. |
| AdvSkill <AV> <#> | This command helps to give a player a certain skill point. |
| psb | This command helps to unlock all spells and shouts. |
| player.advlevel | This command helps to level up the character. |
| enableplayercontrols | It activates player controls during cinematic shots. |
Final Words
These were The Elder Scrolls V Skyrim PC Consoles Command Cheats. Let snow in the comments which of the above cheats you are going to use in the game. Moreover, feel free to check out our other cheat code guides.
Also Read