There are three Blink cameras, and all three work with Amazon Alexa. Blink is one of the best-selling smartwatches on the market, with a battery life of two years. You can power a Blink camera until the mid-2020s with just two AA batteries (you probably have them lying around your house right now). Blink cameras might seem a bit crummy, given their long battery life.
It’s amazing, though, that they aren’t. These cameras can record high-quality video and clear audio even with long battery life, and they can be customized to fit your preferences, so you can keep an eye on your property more easily.
But unfortunately, for the past couple of days, many users have started reporting that they are facing issues with their Blink camera as they find the Blink Camera blinking red light. However, it is still unclear why this issue occurs. But, we have tried to resolve this guide’s Blink Camera blinking red light issue.
In most cases, a blinking red flash indicates that your Blink camera has lost connection to the internet or that your battery needs to be replaced. Fortunately, you can fix these problems easily, and you need not be concerned if your camera starts flashing red lights.
To fix the Blink Camera blinking red flashlight issue, you must have to perform the methods that we have mentioned below. So, let’s check out those fixes:
Fix 1: Power Cycle Your Camera
Sometimes, power cycling your Blink camera helps to fix the Blink Camera blinking red light. As a result, you should also try this and see if it helps to resolve the error. Nevertheless, if you have already tried this but still getting the error, then we advise you to make sure to perform the other fixes mentioned further in this guide.
Fix 2: Loss of Internet Connection
Blink Outdoor Cameras require an internet connection during the initial setup. You will not be able to stream any live video from your outdoor camera without a Wi-Fi connection.
The Blink Outdoor Camera’s setup process will allow you to determine whether the internet connection is a problem. The red light on the camera will flash 3-4 times during the first setup, followed by repeated soft red blinks until the camera is connected to the internet. In order to determine whether the internet causes your problem, keep an eye on this pattern.
You can, however, use the specific flashing red light pattern to determine if the Internet connection is the cause if your camera has been connected to Wi-Fi for some time and is now flashing red. In addition, you can check to see if any other devices in your home using the same Wi-Fi are connected and whether or not your internet is working or not.
You can quickly resolve the flashing red light problem by reconnecting your Blink Outdoor Camera to Wi-Fi. You can connect your Blink Outdoor Camera to the internet by following these steps:
- You may connect the Blink Outdoor Camera to the Sync Module’s Wi-Fi network by using the serial number that comes with it (it will be called “BLINK-“).
- Once the secure connection has been made, tap Join.
- If there are any detected Wi-Fi networks in the list, select your own Wi-Fi name (by clicking on its name).
- You will need to enter your password.
- After a successful network setup, a Done button should appear on the screen. Tap on it.
If you are still having problems after trying this process three times, you should contact support for assistance.
Fix 4: Change The Low Battery
It is also possible for your device’s battery to be low if a blinking red light is on. The blue recording light will go out after 5 or 6 flashes by the camera, according to Blink Support. Afterward, you will not be able to see anything on your camera which indicates your batteries are dead.
When there is a loss of internet, the red flashing light pattern will be short, quick, and continuous, unlike the red flashing light pattern. There will be a couple of solid red flashes, followed by a short period of silence if there is a battery problem. Your Blink Outdoor Camera can be prevented from experiencing battery failure in a few ways:
- Keeping track of how often you replace the battery and making notes on when to replace them is a smart idea.
- Battery type: AA lithium non-rechargeable (make sure you have the right batteries).
- It is essential to make sure the batteries are installed properly.
So, that’s all on how to fix Blink Camera blinking red light. We hope that you find this guide has helped you. However, for more info, comment below and let us know.