The Chinese OEM Xiaomi has launched its entry-level budget category smartphone called Xiaomi Redmi 7A in mid-2019. It has an HD+ display, Android 9.0 Pie, SDM439 SoC, 2GB/3GB RAM, 16GB/32GB of internal storage, a 12MP/13MP rear camera, a 5MP selfie shooter, a 4000mAh battery, and more. Currently, the Redmi 7A gets the latest February 2020 Security Patch update based on Android 9.0 Pie. Here you can Download MIUI 18.104.22.168 Russia Stable ROM for Redmi 7A [V22.214.171.124.PCMRUXM].
The new firmware update brings the latest February 2020 Android Security Patchset with a software version V126.96.36.199.PCMRUXM that rolling out in Russia via OTA in a gradual way. So, it’s expected that the OTA update notification may take some time to arrive on all the Mi A3 (Codenamed as pine) units completely. Either you can manually check for OTA updates or can manually flash the firmware by following the guide below.
Check Software Update Manually
If you don’t know, Xiaomi always provides firmware updates to its devices in a phased manner that may take a few days or so to arrive on all the eligible units. Now, if in case, you don’t want to wait further or not getting the OTA update, then check the firmware update manually.
Head over to the device Settings > About Phone > Software Update. If the latest firmware update is available, simply grab by downloading and installing it. Additionally, you can go to the Software Updater app on your handset to check the same.
Changelog: MIUI 188.8.131.52 Russia Stable ROM for Redmi 7A
- Updated Android Security Patch to February 2020. Increased system security.
Steps to Install MIUI 184.108.40.206 Russia Stable ROM for Redmi 7A (pine)
To install the update manually, make sure to check out the pre-requirements and downloads before flashing.
- This MIUI 220.127.116.11 Russia Stable ROM file is only supported for the Xiaomi Redmi 7A (pine).
- Try to fully charge your device before installing the firmware.
- We will recommend you to take a complete backup of device data without root.
- A PC or Laptop and a USB cable are required.
Instructions to Install:
After following all the pre-requirements and downloads properly, now you can proceed to the guide in order to install MIUI 18.104.22.168 Russia Stable ROM update on your Redmi 7A via Recovery or Fastboot method manually.
You can check out our full-depth tutorial video as well:Video Guide on Steps to Flash Xiaomi Device using Fastboot Method
That’s it, guys. We hope you’ve found this guide useful and successfully updated the latest firmware on your Redmi 7A device. For any queries, feel free to ask in the comments below.