Fix: ELEMENT TV Wont Turn ON

Element TV is one of the few brands that make their name with their affordable and quality TVs. There are thousands of users who use the Element TV as their main entertainment box. They have various selections of TV for every kind of user. But, even though there are many users who didn’t feel happy with their products. Yes, there are several users who reported that their ELEMENT TV wouldn’t turn on. Well, that’s the reason why we are here. In this troubleshooting guide, you will learn how to resolve ELEMENT TV won’t turn on issue. So, let’s get started with the guide.

Fix: ELEMENT TV Wont Turn ON

Why is Element TV Not Turning On?

There are many reasons why your Element TV won’t turn on. However, sometimes these all are the potential causes behind this problem:

  1. There is a possibility that a failure has damaged your TV’s power supply, making it difficult to turn on.
  2. It will not be possible for your Element TV to turn on if the power cable has been damaged or is faulty.
  3. Replace the batteries for your remote if they are worn out.
  4. When an object gets in the way of your remote’s signal, the TV will be unable to turn on.

How to Fix ELEMENT TV Won’t Turn ON

If you are someone who is looking for some potential fixes that have the potential to resolve the ELEMENT TV won’t turn on issue, then make sure to perform the fixes we have mentioned further in this guide. Therefore, make sure to read the guide until the end:

Fix 1: Perform a Power Reset

You should perform a power reset whenever your TV does not start. When you turn on your TV next time, you will have a clean boot as the current power flow will have been discharged. However, to reset the power, follow these steps:

  1. Press the power button once to turn off the TV.
  2. Remove the power adapter from both ends of your Element TV.
  3. For best results, wait 5 minutes after the power reset.
  4. Reconnect the power source and TV with the power adapter.

Fix 2: Change the Power Source

There is a possibility that the outlet you have, your Element TV plugged into, has developed problems. You won’t be able to test that, so you will have to relocate your TV and plug it into a different power source.

However, despite the discomfort, it is the only audible way to determine whether the TV is working. If the device is not working, try plugging it into another outlet and using both the power buttons to power it on.

Fix 3: Troubleshoot Remote

In some cases, even if remote batteries were changed yesterday, they can go faulty very quickly, depending on their quality. You should replace the batteries in your remote because they could be the reason why your TV isn’t turning on.

Take out the old batteries from the compartment beneath the TV and disassemble the remote. You’re ready to go once you insert the newly purchased remotes. However, you might also be able to get better results using a universal remote with your Element TV if that is not the solution. It doesn’t matter how hard you try; if the remote is faulty, you can only replace it.

Fix 4: Remove Interference

Make sure you aren’t using a strip or divider because this might be the cause behind why your Element TV won’t turn on. However, to find out if it will help, plug your Element TV into a wall outlet. These devices are well-known for developing power problems quickly. So the next step is to disconnect all of your TV’s connected devices, including consoles, soundbars, flash drives, etc. Also, you should temporarily remove any electrical devices from the vicinity of your TV. This will surely help you resolve the Element TV won’t turn on issue.

Fix 5: Check The Power Adapter

Even if you have changed the power source, you may need to check the p[ower adapter if you are having trouble starting your Element TV. However, water damage can cause the power cable to go faulty, possibly resulting in your TV being destroyed. It may be possible to test it on another device or replace the cable if your TV wasn’t affected. If it doesn’t work, try plugging it into another device with the same power-adapter hole or purchase a new one if necessary.

Fix 6: Use the Hardware Button

Last but not least, try pressing the hardware button. Your Element TV can be powered on with either of two power buttons, as we mentioned at the beginning. So, to solve the problem, hold the power button for five seconds, then unplug and replug the power adapter. Thereafter, you should be able to turn it back on after that. In case the issue still persists, most probably have a hardware problem that cannot be fixed at home. So, bring an expert or go to your nearest service center.

So, that’s how to fix the Element TV won’t turn on issue. We hope that this troubleshooting guide has helped you. In the meantime, in case you need more info regarding this topic, comment below and let us know.

Also Read

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.