Samsung started seeding the January 2020 security patch update for the Galaxy S10 Plus based on Android 10. The update is now live with software version G975FXXS3BTA2 in the United Kingdom. Here you can easily download and manually install the firmware on your Galaxy S10 Plus.
The all-new January 2020 patch set brings the improved system security for the Samsung Galaxy S10 Plus (SM-G975F) model via OTA in a phased manner. Therefore, we can expect that the update will soon arrive at all the units in the United Kingdom. However, we will recommend you to check for OTA updates manually on your device. If not, then follow the full guide to install the new version on your handset by following the guide below.
Table of Contents
Samsung Galaxy S10 Plus Plus Overview
Samsung Galaxy S10 Plus Plus was announced in March 2019 which sports a 6.4-inch Dynamic AMOLED display with a screen resolution of 3040 x 1440 pixels with 526 PPI pixel density. The device is protected by Corning Gorilla Glass 6.
Samsung Galaxy S10 Plus Plus is powered by an Exynos 9820 (8 nm) – EMEA/LATAM or Qualcomm Snapdragon 855 (7 nm) – USA/China chipset coupled with 8/12GB of RAM and 128/512/1024GB of internal storage. It also supports a 1TB external memory card. The device came out of the box with Android 9.0 Pie under One UI and backed by a 4100 mAh battery (Non-removable).
As far as the camera concerned, the device has a Triple-camera setup with 12MP + 12MP + 16MP primary sensors and a selfie camera with a 10MP + 8MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Samsung Galaxy S10 Plus Plus comes with a fingerprint sensor under the display
Check Software Updates
Some times, the OTA update may take some time to appear on all the units. Therefore, you should check for the OTA update manually by heading over to the phone Settings >> System >> System Updates. If available, simply download and install it.
Firmware Details: G975FXXS3BTA2
- Device Name: Samsung Galaxy S10 Plus (SM-G975F)
- Region: United Kingdom
- Build Number: G975FXXS3BTA2
- Android OS Version: Android 10 Q
- Software Supported: ODIN
- Android Security Patch Level: 2020-01-01
Steps to Install Stock Firmware on Samsung Galaxy S10 Plus
If in case, you’re not getting the software update notification on your device, just follow the requirements and download links below before heading over to the firmware installation guide.
- This ROM is for the Galaxy S10 Plus (Global) variant only.
- Charge your device more than 60%.
- You will require a PC/Laptop and a USB cable.
- Keep your device data backed up completely.
- Make sure that you’ve downloaded all the required files, drivers, and tools on your PC.
Firmware Installation Guide: G975FXXS3BTA2
Now, without wasting any more time, let’s jump into the guide below. Additionally, we’ve provided the video guide as well.
We hope you’ve found this guide helpful. If you’ve any queries, feel free to ask in the comments below.