Tecno POVA 3 was launched in India as the latest affordable gaming smartphone that runs on Android 11. The smartphone features a 6.9-inch full-HD+ Dot-in display with a 90Hz refresh rate powered by a MediaTek Helio G88 SoC, along with up to 6GB of RAM. Tecno POVA 3 sports a 50 MP triple rear camera setup with quad flash. On the front, it has an 8 MP hole-punch selfie camera.
In this guide, we will share the latest Google Camera for the Tecno POVA 3 with you. Google camera is the stock camera app that ships with Google’s Pixel device. The camera brings the latest HDR+ technology, which improves picture quality, especially on low and mid-end phones. The app also includes the Night Sight feature, portrait mode, motion photos, panorama, lens blur, 60fps video, slow motion, etc.
If you are someone who wants to install the Google Camera on your Tecno POVA 3, then this guide is for you. Thanks to some of the creative and hard-working developers such as Arnova8G2, BSG, and Urnyx05, who’re trying hard to make ported GCam APK files to most of the devices out there. The Google Camera port is now available for the Tecno POVA 3 devices.
Tecno Pova 3 Device Overview:
The Tecno Pova 3 features a 6.9 IPS LCD panel with a 90 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2460 pixels and an aspect ratio of 20:9. Under the hood, we get the MediaTek Helio G88 processor built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2. The smartphone comes with Android 11 out of the box with HIOS skin running on top.
In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 50 MP primary sensor paired with an f/1.6 lens, a 2 MP depth sensor paired with an f/2.4 lens, and another 2 MP sensor. The selfie camera at the front is an 8 MP primary sensor paired with an f/2.0 lens. The rear camera setup can capture 2K videos at 30 fps, while the front camera is limited to 1080p video recording.
The smartphone comes in two storage options: 64GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. We also get a dedicated microSD slot for storage expansion. In terms of communications, we get WLAN, Bluetooth, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, and compass. Powering it all is a 7,000 mAh battery that can be topped up quickly using a 25W power adapter. It also supports reverse wireless charging of 10W. The smartphone is available in three color options: Electric Blue, Tech Silver, and Eco Black.
Download Google Camera Port for Tecno POVA 3
- Download Google Camera 7.3.018 APK [Recommended]
- Download Google Camera 7.3.021 APK
- Download GCam_6.1.021_Advanced_V1.4.032219.1950: Download
- Download GCam by Arnova8G2: Download
- Download Google Camera Go
Steps to install Google Camera on Tecno POVA 3
The Google Camera APK file installation process is as simple as installing any other third-party APK file. You don’t have to root your device for this.
- Download the GCam APK file from the download link above and tap on it.
- Make sure that the Unknown Sources option is enabled on your device. To do this, go to the device Settings menu > Security/Privacy > enable it. [If already enabled, skip to the installation]
- It will launch the package installer and tap on the Install button.
- Once the installation is done, open and use it.
Still, if the camera app doesn’t work, enable the Camera2api by using build.prop (Not for every device)
I hope this guide will help you a lot, and you have now successfully installed the Google Camera ported app on your Tecno POVA 3 handset. In case you’re facing any trouble, feel free to write it down in the comments below.