Are you dealing with the overheating problem on your smartphone? Trust me you are not alone. Because there are plenty of users using vivid make and model that are experiencing the same issue and that is what reduces the performance on a smartphone let alone the degraded battery life. We did a little bit of research on the matter and found out few troubleshooting methods that must work on your Vertex overheating problem that you can use to fix it or use it on other smartphones for that matter so read along.
- 1 How to fix the Vertex overheating problem?
- 1.1 Purge all the active apps and services
- 1.2 Refrain from sunlight
- 1.3 Limit using the phone
- 1.4 Turn off the device
- 1.5 Check for power-hungry apps
- 1.6 Use power saving mode/apps
- 1.7 Uninstall or disable unwanted apps
- 1.8 Clear cache files
- 1.9 Update all the apps on your device
- 1.10 Update the Android firmware
- 1.11 Perform a hard reset on the device
- 1.12 Consult a professional
How to fix the Vertex overheating problem?
Overheating problem is severe in smartphones nowadays as we tend to use our phones throughout the day. Processors mounted on smartphones have built-in throttling facility and flagship smartphones have a cooling system as well that helps lower the overall temperature. However, call it either due to excess use or when the phone finds it difficult to remove heat. This all leads to the overheating problem and that affects the system’s performance, battery life, and almost all other aspects so here’s how you can fix it.
Purge all the active apps and services
The moment you feel as if the phone is heating above the usual temperature, I would suggest you to simply turn off all the apps right away. Since it is easy to save work done on an app before closing it, this is ideal rather than rebooting the device which is also one of the best ways to fix the issue. There are two ways to close active apps i.e. either by closing them by tapping on ‘recent’ apps. You’ll need to visit Settings >> Apps >> Running where you can force stop apps that keeps on turning up repeatedly. You can slide down the notification panel and close all active services.
Refrain from sunlight
Yes, it is imperative to refrain from excessive sunlight. This is because smartphones are vulnerable to heat and when sunlight falls on the phone, heat generation is imminent. Accumulation of heat without any proper dousing can raise the internal temperature and could cause major damage to the physical components such as the processor. This, refrain from sunlight at all time.
Limit using the phone
This has increasingly become common because people are addicted to their phones and this increases phone usage. Although your phone is made up to work continuously for hours until the battery drains, it is not always a good option to use a phone until its battery drains. Since the battery is providing power to the components, it is also generating heat and continuous usage propels the internal temperature as well. Thus, limit the usage and in fact, I would suggest users stick to using the phone is short burst as and when needed to get more from it.
Turn off the device
Were you waiting for this troubleshooting method? This is the simplest of all and requires users to simply long press the power key and that’s all. The fact behind why it works is very simple. Your phone uses resources, battery, to run apps and processes round the clock. This leads to heat generation while a resource crunch is also a massive thing when you are using the phone for a longer duration. But a quick reboot will eventually close all apps, services, and relieves the phone.
Check for power-hungry apps
Apps/services consume power from the battery. Although not all apps have similar power requirements, there are apps such as games or heavy apps like Microsoft Office, Adobe Photoshop that consume a lot of power. Then there are apps that aren’t meant to consume a chunk of battery but they’ll do because of bugs or any other issue. This is why you need to slide into the Settings >> Battery >> View Battery Usage. Post that, you can either limit the usage of such power-hungry apps or uninstall those apps that aren't required.
Use power saving mode/apps
Although this isn’t a troubleshooting guide to fix battery draining problems, power saving modes or apps can get your phone back on track if it is facing an overheating problem. This is because power saving mode restricts battery usage and thus, the less battery is consumed, the less heat is generated and thus, a lesser probability of overheating problem that we are discussing right here.
Uninstall or disable unwanted apps
We often indulge in practices that involve downloading apps that we either not need or something that we’ll use once and then let it rot on the phone forever. Although your phone is able to sustain optimum performance even with plenty of apps installed depending upon the RAM and internal storage configuration, just too many apps can affect performance. Thus, it is highly advisable to get rid of apps that you either don’t require or need since you can always download an app later when you need it.
To uninstall a third-party app, go to Settings and check out for ‘Apps >> Downloaded’ to find those potential apps that you can remove. On the contrary, to get rid of unwanted bloatware which isn’t possible to uninstall, go to Settings >> Apps >> All and choose apps that you don’t want and ‘Disable’ it.
Clear cache files
For any matter, cache files are to be blamed because these files are vulnerable to bugs and could open backdoors for hackers or any other issues as well. It can also get corrupt causing a strong of a string including the one that we are discussing right here aka Vertex overheating problem. Let’s fix the issue right away.
Firstly, select Settings tool on your device and go to ‘Storage >> Cache Memory’ and clear the same. Secondly, you can revert to ‘Settings >> Apps >> Downloaded’ and click on individual apps to clear cache files. Finally, the third method revolves around the recovery mode that you’ll learn more about in the ‘hard reset’ section below. Remember to select ‘wipe cache partition’ after you boot into this mode to delete all the residual cache files.
Update all the apps on your device
Developers are keen on updating their apps every other month to offer new features, UI changes, and yes, bug fixes. Bugs cause an issue on a smartphone either by disrupting any particular feature when you access an app or crash or failure, etc. This is why it is crucial to fixing bugs that can also open a backdoor for hackers to prone into your phone and steal valuable data. The bottom line is, you need to update all the apps ever installed on your phone without any further ado.
Update the Android firmware
Since we already covered the part of updating the apps, the firmware is again a piece of software and deserves an epitome of importance since it handles all the apps, software, hardware components on a smartphone. You can check out if your phone has received any update or not simply by opening the Settings tool and proceeding to About Device >> Software Updates >> Check for updates. Note that Android OS doesn’t allow every smartphone user to update their systems because it suffers OS fragmentation and has a lot of discrepancies over how phones using it are updated.
Thus, if you are unable to receive an update which is basically almost every phone with and before Android Marshmallow, you can choose custom ROMs to install and get frequent updates on the go.
Perform a hard reset on the device
This is the epitome of this troubleshooting guide and if it doesn’t works which are plausible if you have a hardware problem, you’ll have to report the issue to a technician. Anyhow, let’s see how you can perform a hard reset on your Vertex device.
- First up, you’ll need to turn off the device.
- Now, use power plus volume up and down button to revive the phone and hold it until an Android logo is displayed on the screen.
- Next, release the button and let the phone boot.
- Here, you’ll see a list of items that you can do and you need to tap on ‘wipe data/factory reset’ whilst using power key to select and volume rockers to toggle.
- Confirm the said action by selecting ‘Yes -- delete all user data’ and bingo.
Consult a professional
If you are unable to figure out how to fix the Vertex overheating problem, it’s high time that you move to a professional to get help. Here, you need to know that reporting the issue to an authorized service center is recommended although you can pick third-party or local service stores too.