How to Program Xfinity Remote to TV

Got a new Xfinity TV cable box to start watching your favorite TV shows, movies, or sports events? You will have to keep juggling between your TV remote and Xfinity remote to perform operations. This might hinder your watching experience. But, what if you could control your TV and the Xfinity cable box with just a single remote? With Infinix remotes it’s possible. The process is very simple and does not take more than a couple of minutes. In this detailed guide, we’ll walk you through easy steps to program Xfinity remote to the TV.

How to Program Xfinity Remote to TV

If you are an Xfinity user and want to control your TV and the cable box with a single remote, you’re in for a treat. The Xfinity remote controls the Xfinity cable box. So, you’ll have to keep juggling between different remotes – one for the Xfinity cable box and another for the TV. However, programming your Xfinity remote to the TV makes the Xfinity remote work with your TV as well. Using the Xfinity remote, you can perform various operations on your TV such as increasing/decreasing volume, turning on the TV, and more.

There are multiple Xfinity remotes available in the market. We have detailed the process of programming your Xfinity remote to the TV for all models. Therefore, identify the model number of your Xfinity remote (located on the backside or inside the battery compartment) and follow the steps accordingly.

Here’s How to Program Your Xfinity Remote to the TV

Programming your Xfinity remote to the TV should not take more than a minute or two. Below, we have shared the steps for all Xfinity remote models.

Programming Xfinity XR11 Remote Using the Setup Button

Although Xfinity XR11 is a voice remote, you can use voice commands to program it to your TV. Instead, you will have to use the setup button. Before you start programming the remote, make sure it has batteries inside. Also, make sure both the TV and the cable box are turned on.

Here are the steps you need to follow:

  1. Press and hold the “Setup” button until the LED light changes from red to green.
  2. Now, type in the required TV code. You can find it on the Remote Control Code Lookup page.
  3. If the code you entered is correct, the status LED will flash green twice. Otherwise, it will blink red meaning the code is incorrect.
  4. If the code is incorrect, try another code. Repeat this process until you found the correct code.

You can now use your Xfinity remote to perform various operations on your TV.

Programming Xfinity XR15 and XR16 Remote:

Unlike XR11 which does have the voice function but can’t use for programming the remote, the Xfinity XR15 and XR16 follow a traditional approach. You can program these Xfinity remotes to your TV using your voice.

If you have an Xfinity XR16 remote, follow these steps:

  1. Hold down the microphone button and say “Program remote”.
  2. Select “Yes” to confirm that you want to use your Xfinity remote to control your TV power and volume.
  3. Now, follow the on-screen instruction and get your Xfinity remote programmed to your TV.

Follow these steps to program Xfinity XR15 without the Setup button:

  1. Turn on your TV and the Xfinity cable box.
  2. Make sure the remote has batteries in it.
  3. Now, press and hold the Xfinity and mute buttons simultaneously for a few seconds.
  4. Release the buttons when the LED indicator changes from red to green.
  5. Now, type in the required TV code. You can find it on the Remote Control Code Lookup page.
  6. If the code you entered is correct, the status LED will flash green twice. Otherwise, it will blink red meaning the code is incorrect.
  7. If the code is incorrect, try another code. Repeat this process until you found the correct code.

You can now use your Xfinity remote to perform various operations on your TV.
To verify that the connection is successful, press the power button to check if your TV turns off. If yes, you are good to go. Otherwise, you will need to repeat all the steps.

Programming your Xfinity Remote to the TV with the My Account App

If, for some reason, you can’t (or don’t want to) program Xfinity remote to your TV using the voice function or the setup button,  you can use the My Account App available for iOS and Android.

Here are the steps you need to follow:

  1. Download the My Account app on your Android or iOS device.
  2. Open the app and sign into your Xfinity account.
  3. Tap on the TV icon and then select your TV box.
  4. Now, tap on the Setup Remote option.
  5. Select your Xfinity remote and click Continue.
  6. Choose what device you want to program (a TV or an audio device).
  7. Follow on-screen instructions to complete the process.

Conclusion

So, that’s how you can easily program your Xfinity remote to your TV. The steps and pretty simple and straightforward. You should not be having trouble programming your Xfinity remote to the TV after following this guide. However, if you encounter any issues, do reach out to us via the comment section.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.