Insignia TV users often complain about volume issues, which is evident throughout their lineup of smart TVs. For some people, the volume gets stuck at a high level, while for some, the issue is with the book being low all the time. This is undoubtedly a software bug that is present across all Insignia TVs, and this can be unpleasant for people looking to watch their favourite in the comfort of their sofas.
If you are one of these troubled users, this article should help you out. Here, we have listed all the possible solutions you can try to resolve this issue. Many Insignia TV users who struggle with the volume bug have been able to resolve their problem by trying one of the solutions mentioned below. So without any further ado, let’s get into it.
Page Contents
How to Insignia TV Volume Too Low or Loud Issue?
The solutions mentioned here are all possible software fixes that should work for you. We will start with the answers on fixing the low volume issue and then go for the loud volume issue. Most of the solutions are similar for both of them, though.
Fix the Insignia TV volume too low issue:
Get an external sound system:
Before we get into the actual technical solutions, we recommend you entirely switch to an external audio device. There is a chance that this error might show up even after getting it fixed with a temporary solution. So the ideal thing to do here would be to ditch the TV’s internal speakers entirely and get an external audio system for all your needs.
Soft reset your TV:
Now, if you are set on listening to the audio only on your Insignia TV, the first solution that you can try is a soft reset. A reset is similar to a restart; you must entirely power through the device.
For this, turn off your TV and remove your TV’s power plug from the power source. Now wait for a few minutes and then plug in the cable again. Press the power button on your TV to switch it on.
Try the next solution if this soft reset option does not help with the volume issue.
Reset audio settings:
After a soft reset, it is time you look into your audio settings. Ideally, the settings you get from a new television are set according to standards, with everything set up perfectly. But some users faced issues with the audio settings as well.
So you need to reset your audio settings and check whether that solves your problem.
- Press the Home button on your remote.
- Select Audio.
- Select Reset Audio Settings.
- Confirm your choice and then wait till the TV restarts itself.
If this does not solve the volume issue, try the next solution.
Turn off auto volume:
There is a feature called auto volume on Insignia TVs that adapt the sound level of your TV based on your external noise. But sometimes, this can work against you, and you could have a low-volume issue. So let’s turn off this setting entirely.
- Open the Menu from your remote control
- Select Audio
- Select Auto Volume
- Set it to Off
Try the next solution if the volume is still on the lower side.
Configure Equalizer:
Customers also get an equalizer option to tune in to the sound on the TV. If you have enabled equalizers on your TV, ensure that it is set up correctly. You can play along with the bass and treble options until you find a sound that suits your preference.
Factory reset the Insignia TV:
A factory will remove every bit of data on your Insignia TV. This includes all the customized settings and app preferences. So move ahead with this process only if you are sure that you are okay with losing all your data.
- Press the home button on your remote.
- Go to Settings.
- Go to Device & Software.
- Select Reset to Factory Defaults.
- Wait till your TV finishes the factory reset, and then recheck the volume.
If it is still on the lower end, try the next solution.
Hardware reset the Insignia TV:
A Hardware reset is another option that you can try.
- Turn off your Insignia TV.
- Unplug the power cord of the TV from the power source.
- Remove all the external cables or devices connected to your TV.
- Now press and hold the Power and Volume + button on your remote for a few seconds.
- Wait for 2 minutes.
- Reconnect all the cables you previously disconnected, including the power cable.
- Turn on your TV like you usually do and check whether the low volume issue is fixed.
Try the next solution if the volume is still on the lower side.
Update the TV firmware
Just like smartphones, smart TVs also get updates over time. And these updates can iron out the bugs that are present in your TV’s software. So if you have not uploaded your TV’s firmware in a while, you should also give it a try.
To perform a firmware update on your Insignia TV, you must first gather specific information about your TV.
- Press the menu button on your remote control.
- Select the Help tab.
- Go to System info.
- Note down the model, revision, and firmware information.
Once you have this data, you need to download the latest firmware based on your model number.
Now we move on to the process of installing the latest firmware.
- Open up the browser on your PC.
- Visit insigniaproducts.com.
- Go to Support & Service.
- Enter the TV information you have noted down before.
- Follow the guide and download the firmware to your computer.
- Connect a USB device to your PC and move the update file to your USB stick.
- Plug the USB stick into your TV.
- Press Menu on your remote.
- Go to the Help tab.
- Select the option Update Firmware.
- Confirm the action by selecting Okay.
- And then press Enter.
- Wait till the update is complete, and do not turn off your TV.
- After the update, unplug the USB and restart your TV.
Now recheck the volume on your TV. If it is still on the lower end, try the next solution.
Contact support:
If none of the solutions mentioned above worked for you, you should consider contacting the customer support of Insignia. Just visit the nearest service centre in your area, and they should be able to help you out with your problem.
Fix the Insignia TV volume too loud issue:
Turn off auto volume:
There is a feature called auto volume on Insignia TVs that adapt the sound level of your TV based on your external noise. But sometimes, this can work against you, and you could have a high-volume issue. So let’s turn off this setting entirely.
- Open the Menu from your remote control
- Select Audio
- Select Auto Volume
- Set it to Off
Try the next solution if the volume is still on the higher side.
Power Cycle your TV:
Now, if you are set on listening to audio-only on your Insignia TV, the first solution that you can try is a soft reset or power cycle. A reset is similar to a restart. You need to power through the device entirely here.
For this, turn off your TV and remove your TV’s power plug from the power source. Now wait for a few minutes and then plug in the cable again. Press the power button on your TV to switch it on.
Try the next solution if this power cycle option does not help with the volume issue.
Reset audio settings:
After a soft reset, it is time you look into your audio settings. Ideally, the settings you get from a new television are set according to standards, with everything set up perfectly. But some users faced issues with the audio settings as well.
So you need to reset your audio settings and check whether that solves your problem.
- Press the Home button on your remote.
- Select Audio.
- Select Reset Audio Settings.
- Confirm your choice and then wait till the TV restarts itself.
If this does not solve the volume issue, try the next solution.
Factory reset the Insignia TV:
A factory will remove every bit of data on your Insignia TV. This includes all the customized settings and app preferences. So move ahead with this process only if you are sure that you are okay with losing all your data.
- Press the home button on your remote.
- Go to Settings.
- Go to Device & Software.
- Select Reset to Factory Defaults.
- Wait till your TV finishes the factory reset, and then recheck the volume.
If it is still on the higher end, try the next solution.
Hardware reset the Insignia TV.
A Hardware reset is another option that you can try.
- Turn off your Insignia TV.
- Unplug the power cord of the TV from the power source.
- Remove all the external cables or devices connected to your TV.
- Now press and hold the Power and Volume + button on your remote for a few seconds.
- Wait for 2 minutes.
- Reconnect all the cables you previously disconnected, including the power cable.
- Turn on your TV like you usually do and check whether the high volume issue is fixed.
Try the next solution if the volume is still on the higher side.
Update the TV firmware
Just like smartphones, smart TVs also get updates over time. And these updates can iron out the bugs that are present in your TV’s software. So if you have not uploaded your TV’s firmware in a while, you should also give it a try.
To perform a firmware update on your Insignia TV, you must first gather specific information about your TV.
- Press the menu button on your remote control.
- Select the Help tab.
- Go to System info.
- Note down the model, revision, and firmware information.
Once you have this data, you need to download the latest firmware based on your model number.
Now we move on to the process of installing the latest firmware.
- Open up the browser on your PC.
- Visit insigniaproducts.com.
- Go to Support & Service.
- Enter the TV information you have noted down before.
- Follow the guide and download the firmware to your computer.
- Connect a USB device to your PC and move the update file to your USB stick.
- Plug the USB stick into your TV.
- Press Menu on your remote.
- Go to the Help tab.
- Select the option Update Firmware.
- Confirm the action by selecting Okay.
- And then press Enter.
- Wait till the update is complete, and do not turn off your TV.
- After the update, unplug the USB and restart your TV.
Now recheck the volume on your TV. If it is still on the higher end, try the next solution.
Get in touch with the support.
If none of the solutions mentioned above worked for you, you should consider contacting the customer support of Insignia. Just visit the nearest service centre in your area, and they should be able to help you out with your problem.
So these are all the solutions to fix the Insignia TV volume too low or loud. If you have any questions or queries about this article, comment below, and we will get back to you. Also, check out our other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.