Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your Doogee Y6 then you can easily install the firmware flash file on it. Since Doogee Y6 is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your Doogee Y6 device. On this page, we will guide you on how to flash the firmware file on Doogee Y6 using the flash tool.
The most smartphone gets hard brick because of the carelessness of its users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with Doogee Y6 users. But don’t worry, as installing Stock ROM on Doogee Y6 is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick Doogee Y6 back to the previous working condition.
Doogee Y6 Firmware Flash File Guide
Remember this guide is also very much needed in case of upgrade or downgrade the firmware on Doogee Y6. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Doogee Y6 using this guide.
As we said above – installing a firmware file on Doogee Y6 is no rocket science. The actual process of flashing Stock Firmware on Doogee Y6 is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Doogee Y6 using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.
Advantage Of Doogee Y6 Stock Firmware:
- Flash Stock To Unbrick your Doogee Y6
- Flash Stock ROM to Fix the boot loop problem
- Upgrade and Downgrade Doogee Y6
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Doogee Y6
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Device Supported: Doogee Y6
- Tool Supported: SP Flash Tool
- Gapps Included
- Processor: MediaTek
- OS: Android 6.0 and 7.0
Steps to Install Stock Firmware on Doogee Y6
Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.
- This guide will only work for Doogee Y6
- You should have a working Windows PC/Laptop
- Charge the device battery up to 50%
- Take a complete backup of your phone data [Follow any method]
- How to Backup Your Android Phone Without ROOT
- How to Backup Complete Stock or Custom ROM using TWRP recovery
- Backup Your Android Apps and Data with Titanium Backup
- How to Backup Your Android Phone Directly to PC with TWRP!!
- How to Backup Your Data on an Android device
- If you already have TWRP: then you can Create and Restore Nandroid Backup via TWRP
- Download SP Flash tool – Make sure that you have downloaded and installed the latest SP Flash tool on your PC
- Download VCOM Driver and install it on your computer (still compatible with MT67xx phones).
- Download Android USB Drivers
Doogee Y6 Flash Files
|Software Details||Download Link|
|Flash File Name: Doogee_Y6_MT6750_20161209_6.0.zip
File Size: 1 GB
OS: Android 6.0
|Flash File Name: 17-2-13 t725b-dg-a52-63m-hd-128g16g-bom3-3m-M-warm_DOOGEE-Y6-Android6.0-20170208.rar
File Size: 1.16 GB
OS: Android 6.0
|Flash File Name: Doogee_Y6_MT6750_20170425_7.0.zip
File Size: 1.44 GB
OS: Android 7.0
|Flash File Name: 17-9-5 t725b-dg-a52-63m-hd-128g16g-bom3-3m-nR17.rar
File Size: 1.36 GB
OS: Android 7.0
Instructions to Install
Now, without wasting any more time, let’s jump into the firmware installation steps below:
- Make sure you follow and download all the required files and flash tools on your PC.
- Open the flash tool exe file to open the SP Flash Tool User Interface
- Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
- Once you load the file, click the Download button
- To start the upgrade process of stock ROM on your Doogee Y6, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When the phone connects, your device will start upgrading the stock firmware
- Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
- That’s it! You can reboot your Doogee Y6
I hope you installed the Stock Firmware on Doogee Y6 successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!