Advertisements

Download MIUI 11.0.13.0 China Stable ROM for Mi 10 Pro [V11.0.13.0.QJACNXM]

The Xiaomi Mi 10 Pro was launched recently in February 2020 with a Super AMOLED display, a 90Hz refresh rate, 180Hz touch-sensing, Android 10 (MIUI 11), SDM865 SoC, 8GB/12GB RAM, 256GB/512GB of internal memory, 108MP quad rear cameras, a 20MP selfie shooter, a 4500mAh battery with 50W fast charging, and more. If you’re one of the Mi 10 Pro users, then you’ve recently updated your Mi 10 Pro to February 2020 patch. Now, Xiaomi has released MIUI 11.0.13.0 China Stable ROM for Mi 10 Pro.

This new software update features increased system stability and reduced system lag that comes with a new software version V11.0.13.0.QJACNXM based on Android 10. There are no other improvements or additional features available right now for the Chinese Mi 10 Pro (Codenamed cmi). So, if you’re interested in upgrading this firmware version, you should check for OTA updates or you can manually download and install the firmware on your handset. Now, let’s take a quick look at the update changelog below:

Download MIUI 11.0.13.0 China Stable ROM for Mi 10 Pro [V11.0.13.0.QJACNXM]

Check Software Updates (OTA)

As the firmware update is waving its way via OTA in an incremental manner, you should always check for OTA updates. In order to do this, head over to the device Settings > About Phone > Software update. However, you can go to the Software updater app directly and check for OTA updates.

If there is any latest update available on your handset, just download and install it. Ensure that the phone is connected to a Wi-Fi network and the battery level should be around 60% for a smoother process.

Still not getting the software update? Don’t worry. We have provided the firmware download link along with the requirements and flashing steps below.

Steps to Install MIUI 11.0.13.0 China Stable ROM for Mi 10 Pro [V11.0.13.0.QJACNXM]

We’ve shared two flashing methods to flash the stock firmware on your Xiaomi devices such as the Recovery method or Fastboot method. Check out the guide below. Make sure to follow the requirements and download links.

Disclaimer:

GetDroidTips won’t be held liable for any kind of error that may occur to your phone by following this guide or flashing any file. Take a full backup before doing anything and proceed at your own risk.

Pre-Requirements:

  • The ROM supported for Xiaomi Mi 10 Pro only. Don’t try it on other models.
  • Charge your phone battery up to 60% minimum.
  • Take a complete backup of internal data (No Root).
  • You will need a PC/Laptop and a USB cable.
  • Download and Install all the following tools and drivers on your computer.

Download Links:

Installation Steps: MIUI 11.0.13.0 China Stable ROM for Mi 10 Pro

Now, after following all the requirements and downloading the files or tools, you’re ready to install the firmware.

Steps to Install MIUI ROM on Xiaomi Device [Recovery/Fastboot]

You can check out our full-depth tutorial video as well:

Video Guide on Steps to Flash Xiaomi Device using Fastboot Method

That’s it, guys. We hope that you’ve found this guide helpful and you’ve installed or updated the latest MIUI firmware on your Mi 10 Pro successfully. For any queries, let us know in the comments below.

Advertisements

 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.