With a Universal Remote, you have the power to operate multiple devices at once. Say goodbye to juggling multiple remotes for various devices, as one remote can control everything. You can input codes or go without them to program your GE Universal Remote. This guide will walk you through both methods and provide troubleshooting solutions for any issues that may occur.
Page Contents
GE Universal Remote Codes Complete List (for TVs 2023)
List of GE Universal Remote Codes for Vizio TVs
| Vizio TV Model | GE Remote Control Codes |
| Vizio TV, CL3 | 5561, 5571, 5581, 5591, 5601, 5611, 5621, 5631, 5641, 5651, 5661, 5671, 5681, 5691, 5701, 5711, 2901, 1471, 1741, 2021, 3651, 3741, 3851, 4081 |
| Vizio TV, CL4 | 5631, 5561, 6121, 6131, 5611, 6111, 5651, 5621, 5711 |
| Vizio TV, CL5 | 5631, 5611, 5561, 6471, 6511, 6121, 6131, 6111, 5651, 5621, 5711 |
GE Universal Remote Codes for LG TV
| LG Smart TVs | 0156, 0338, 0004, 0227, 0005, 0080, 0012, 0050, 0009, 0057 |
| LG TV (CL3) | 0001, 0131, 0251, 0611, 0761, 0931, 1181, 1221, 1471, 1501, 1911, 3001, 3021, 3091, 3221, 3281, 3311, 3811, 4731, 5271, 5501, 5511 |
| LG TV (CL4) | 0001, 1181, 1221, 1911, 3001, 5511, 6021 |
| LG TV (CL5) | 0001, 1181, 1221, 1911, 3001, 5511, 6021 |
Programming your GE Universal Remote with Code
If you want to program with your GE Universal Remote using code, then you must perform these steps:
Step 1: Find the correct code for your device
You must find the right code for your device before you can program your GE Universal Remote. It is a series of numbers that identify your device so that you can use the remote control in order to control it. You can find your device’s code if you have a GE Universal Remote manual or a search engine. Make sure to write down the code, as you will need it later.
Step 2: Turn on the device you want to program
GE Universal Remotes can be programmed by turning on the device you wish to program. You can use the remote to control your TV or DVD player or any other device that you want to control.
Once the indicator light is on, press and hold the “Code Search” button on your GE Universal Remote.
Step 4: Enter the code for your device
You will need to enter the code for your device using the number buttons on the remote. It is important to enter the correct code to turn off the indicator light.
Step 5: Test the remote
Make sure that the remote works correctly by testing it. You can power up the device by pointing the remote at it and pressing the power button. In this case, the remote has been successfully programmed if the device turns off after it has been programmed. If not, repeat the process using a different code for your device.
Also Read
Programming your GE Universal Remote without Code
If you want to program with your GE Universal Remote without code, then you must perform these steps:
Step 1: Turn on the device you want to program
Your GE Universal Remote should be turned on before you can begin programming the device. It could be anything you want to control with the remote, from your TV to a DVD player.
Press and hold the GE Universal Remote button corresponding to the device you want to program. In order to program the remote to control your TV, hold the TV button while you press and hold the remote.
When the indicator light on your GE Universal Remote turns on, press and hold the “Code Search” button.
Upon turning on the indicator light, release the device button and the “Code Search” button simultaneously.
On the GE Universal Remote, press the power button repeatedly until the device turns off. Don’t press the power button again until the device has turned off.
Step 6: Save the code
To save the code for your device, press “Enter” on the GE Universal Remote.
Step 7: Test the remote
Make sure the remote is working properly by testing it. By pressing the power button on the remote, you can power up the device. In this case, the remote has been successfully programmed if it turns off the device. Your device may need to be coded again if it does not work the first time.
Troubleshooting Tips
Check out these troubleshooting tips if you’re having trouble programming your GE Universal Remote:
- Check the code on your device to make sure it is correct. Make sure that you have the correct code by checking the manual or online.
- You need to make sure the device you want to program is turned on before you can begin. A device that is turned off cannot be programmed with the remote.
- If you are trying to program a device, point the remote directly at it. For the remote to work, a clear line of sight must be provided between the device and the remote.
- You can try programming the remote using the automatic code search method if the manual method does not work.
- The batteries in the remote may need to be replaced if you are still having trouble programming it. Programming issues can be caused by weak batteries.
- For assistance, contact GE Universal Remote customer support if none of the above tips works.
Conclusion
By programming your GE Universal Remote, you can eliminate the hassle of having multiple remote controls for different devices. Using these step-by-step instructions, GE Universal Remotes can be programmed with or without codes. This guide provides troubleshooting tips in case you encounter any issues during programming. Good luck with your programming! But, for more info, comment below and let us know.
Also Read