Samsung SM-G928F Firmware Flash File (Stock ROM)

In this tutorial, we will guide you on how to install the Samsung SM-G928F (Galaxy S6 Edge Plus) flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy S6 Edge Plus SM-G928F, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

How to Install Stock ROM on Samsung SM-G928F (Firmware Guide)

Samsung Galaxy S6 Edge Plus SM-G928F Firmware Flash Files:

Flash File Name: G928FXXU3CQH4.zip
Build Number: G928FXXU3CQH4
Model: SM-G928F
Android Version: 7.0 Nougat
Download
Flash File Name: G928FXXS3CQK1_G928FDBT3CQJ1_DBT.zip
Build Number: G928FXXS3CQK1
Model: SM-G928F
Android Version: 7.0 Nougat
Download

Steps to Flash Stock ROM File on Galaxy S6 Edge Plus SM-G928F

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy S6 Edge Plus, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy S6 Edge Plus SM-G928F
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy S6 Edge Plus.

Installation Guide

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-G928F firmware flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines

Check out our full-depth video guide as well.

Advertisements
Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.