Fix: Samsung Galaxy Watch 6 / 6 Classic Not Charging

Samsung manufactures the best Android smartwatches in the market right now with better deal prices and capabilities. Its functionalities make it more valuable and superior for many consumers who are already a part of the Samsung Ecosystem. But recently Samsung has launched its new Samsung Galaxy Watch 6 / 6 Classic which is known for their stylish design and an array of features. However, just like any other electronic device encounter issues, most users encountered an issue with their newly Galaxy Watch 6 / 6 Classic.

If you are unable to charge your Samsung Galaxy Watch 6 / 6 Classic, don’t worry, you are not alone. According to reports, several users encountered the charging issue on their smartwatch. They can’t get it to work no matter how many times they try to charge. If you are one of those troubled users, this guide will help you out. Here, we have listed some effective workarounds that you can try from your end to resolve the charging issue with the latest Galaxy Watch 6 / 6 Classic. So, without any further ado, let’s get right into it.

Fix: Samsung Galaxy Watch 6 / 6 Classic Not Charging

Reasons Why Samsung Galaxy Watch 6 / 6 Classic Not Charging?

Before we start, let’s take a look at the reason why Samsung Galaxy Watch 6 / 6 Classic Not Charging. The causes of the watch’s inability to charge could be due to a variety of factors including dirty contacts, faulty charger, software glitches, damaged battery, faulty adapter, overheating issue, and physical charging dock damage. It is also possible that the charging cable you are using for your Galaxy watch is not fully compatible.

Therefore, these are some of the common reasons why the Samsung Galaxy Watch 6 / 6 Classic Not Charging. Now let’s focus on the troubleshooting methods we have listed below in this guide. Make sure to pay attention to each and every solution until or unless you fixed the problem.

How to Fix Samsung Galaxy Watch 6 / 6 Classic Not Charging Issue

Samsung Galaxy Watch 6 / 6 Classic Not Charging problem is annoying especially when you are using your watch for various purposes such as health status, Fitness tracking, Weather control, Voice assistant, and much more. Make sure to verify that whether your Galaxy Watch hasn’t any physical damages or not. In case there is a hardware damages, it is recommended you visit nearby Samsung store or contact the support team for expert assistance.

Fix 1: Try Using the Official Charging Dock

The first thing you have to do is verifying whether you are using the official charging dock for your Samsung Galaxy Watch 6 / 6 Classic. Generally, the charging dock to the smartwatch comes with the watch itself in the box at the time of purchasing it. Make sure you are using an original charging dock that comes with the box itself, as most of the third-party charging dock do not work well with Samsung smartwatches.

After that, you need to plug one end of the cable into a USB charging adapter or any power source such as power bank or the laptop USB Type-C port and connect the charging dock at the other end to your Galaxy watch to charge up the device. Also, make sure to put the charging dock in a correct way at the back of your Watch and then your watch will begin to charge. However, if the original charging dock is damaged, then you will have to buy a new one from Samsung store.

Fix 2: Try a Different Power Adapter or Outlet

Samsung Galaxy Watches ship only with a wireless charger and that’s why we need a compatible wall charger or power adapter. You must purchase a compatible power adapter or wall charger separately. Power adapters whose output ratings are below 5 Volts, and 1 Ampere (5V, 1A) will not charge your Galaxy Watch 6 Series properly.

Therefore, be sure to use a compatible and low Volts power adapter to charge up your Galaxy watch. Connect your wireless charger end to a different adapter with a higher output rating and put the charging dock at the back of your Galaxy watch and check if your watch is charging. You also have to ensure the power source (wall socket, power strip, etc.) is functioning properly. If the watch is still not charging, ensure to charge by using another power outlet or wall socket.

Fix 3: Clean the Watch and Charging Dock

The charging dock connects to the back of your Watch or smartphone to charge it. If there is anything obstructs the connection between the two devices, you will not be able to charge your Galaxy Watch. If you are trying to charge through the wireless with your smartphone, ensure to clean the back of your phone.

Alternatively, your Galaxy watch will not charge if there’s dirty material (like dust, debris, lint, etc.) takes place between the watch and wireless charger. Try using a clean and dry cloth to wipe the back of your Galaxy Watch and wireless charger surface and ensure everything is clean. Once you have cleaned it, try using the charging dock or your smartphone wireless charger and charge your Galaxy watch again. Hopefully, the issue has been resolved.

Fix 4: Check the Charging Dock for Any Damage

It might be possible that your charging dock is the real culprit behind the charging issue. Make sure to check whether your charging dock is functioning properly, or it has any physical damages. However, if you find spot any wear and tear in the cables, then the charging cable need to be replaced. Plus, ensure the charging dock is working properly. In case the wires inside the cable are damaged for individual reasons, then you might experience a charging issue. Ideally, you should buy a new charging deck from the Samsung store and try using the cable to charge your Galaxy watch.

Fix 5: Reboot Your Galaxy Watch

If the power adapter and charging dock is functioning properly, it might be possible that due to software bugs and conflicts your Galaxy Watch 6 / 6 Classic isn’t charging. We suggested you reboot your Samsung Galaxy Watch and try changing it again. Make sure to disconnect the Galaxy watch from the wireless charger rebooting it.

To restart the Samsung Galaxy Watch 6 / 6 Classic, swipe down from the watch face and then tap the Power icon > select Turn Off. Now wait for about 15 seconds for your watch to shut down. Afterwards, press and hold the Power button for 3-5 seconds to turn it back on. If it doesn’t work, try force restarting your Galaxy Watch.

Once you have restarted your Galaxy Watch successfully, then connect the wireless charger to a power outlet and then place your Galaxy Watch on its charger. After that, try checking if the issue has been resolved. If the issue persists, try the next solution.

Fix 6: Update Your Galaxy Watch Software

An outdated or corrupted operating system might be the reason behind the charging issue on your Galaxy Watch 6 / 6 Classic. You need to ensure that your watch OS is running on the latest version to ensure that no conflicts and bugs are causing issues with your Galaxy watch. Simply, update your Galaxy watch’s software and then check if that resolves the issue. Here’s how you can check for updates:

  1. Open Galaxy Wearable app on your smartphone and ensure it is connected to your Galaxy watch.
  2. Head over to Watch settings.
  3. Tap on Watch Software Update.
  4. Download and install the latest version if available.

Once you have successfully updated your Galaxy watch to the latest version, then try charging it and check if the issue has been resolved. If the issue persists, try the next solution.

Fix 7: Factory Reset Your Watch

If you have tried the above solutions and it doesn’t work, you should try to perform factory reset which potentially help you with your charging problem. But it will remove all of your saved settings on your watch. After the factory reset process, your watch will boot up with nothing saved and it will be look like you bought it for the first time.

To factory reset your Galaxy Watch 6 / 6 Classic, follow the steps below:

  1. Shut down your Galaxy smartwatch completely.
  2. Press and hold the Power button until the rebooting icon appears on the screen.
  3. Press the Power button repeatedly until the Select Reboot Mode appears.
  4. Next, select Recovery by using the power button.
  5. Once the recovery option is highlighted, hold the power button until the device reboots.
  6. Once the reboot is finished, set up your watch again.

Once the factory reset is successfully completed, try to check whether your watch is charging or not. If the issue persists, try the next solution.

Fix 8: Contact Customer Support

If none of the above workarounds helps you to resolve the charging issue on your Samsung Galaxy Watch 6 / 6 Classic, then you should contact Samsung customer support for expert assistance. However, Samsung’s customer support is renowned worldwide and known for it’s one of the best manufacturers product in the market. It could be possible that due to hardware or physical damages, your Galaxy Watch isn’t charging properly.

For such a scenario, Samsung can help you with their effective solutions. Therefore, take your charging dock and Galaxy watch to nearby Samsung service center and they will probably fix the problem. After that, you can able to charge your Galaxy Watch 6 / 6 Classic again without any difficulties.

That’s it guys! These are all the solutions to fix Samsung Galaxy Watch 6 / 6 Classic not charging issue. If you have any queries, let us know in the comments section. Also, check out other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.