On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Xiaomi Mi Note 10 Lite, codenamed “toco.” If you’re looking to install the pure version of Android 14, then you’re in the right place.
Xiaomi has recently unveiled its new smartphone i.e., the Mi Note 10 Lite (codenamed toco). This is the premium mid-range smartphone from the brand. It sports a 6.47-inch AMOLED display, Qualcomm Snapdragon 730G, 6 or 8GB of RAM, 64 or 128GB storage, 64MP quad rear camera setup, 16MP front camera, 5260mAh battery, and runs on Android 10.
Page Contents
Xiaomi Mi Note 10 Lite Overview
The Xiaomi Mi Note 10 Lite features a 6.47 inches AMOLED display with a Full HD+ resolution and a waterdrop style notch. The display comes with an optical in-display fingerprint scanner, and an aspect ratio of 19:5:9, a screen to body ratio of 87.8 percent, HDR10, it can blow up to 430 nits, a pixel density of 398 Pixel Per Inch (PPI), and gets protected by Corning Gorilla Glass 5.
Underneath the device, it sports the popular Qualcomm Snapdragon 730G SoC that is built on the 8nm process. It has an octa-core setup and includes two Kryo 270 Gold cores that clocks at 2.2GHz, and six Kryo 270 silver cores that clock at 1.8GHz. To the GPU side, it sports the Adreno 618. Further, the chipset pairs with 6, and 8GB of RAM, and 64, and 128GB of UFS 2.1 storage. Like the premium devices, it can’t be expanded via a micro SD card slot. The device runs on MiUi 11 on top of Android 10.
Talking about the cameras, the Mi Note 10 Lite sports a quad rear camera setup that is housed in a vertical setup. The setup includes a primary 64MP sensor with an aperture value of f/1.9, PDAF, and Laser AF. It pairs with an 8MP ultra wide-angle sensor with an aperture value of f/2.2 and a 2MP macro sensor with an aperture value of f/2.4. Finally, it comes with another 5MP depth sensor with an aperture value of f/2.4. It supports Quad-LED flash and comes with all other features that a smartphone needs. To the front, it comes with a 16MP sensor with an aperture value of f/2.5.
The Mi Note 10 Lite packs a 5,260mAh battery with support for 30W fast charging tech. The phone comes in three color options like Midnight Black, Glacier White, and Nebula Purple. Sensors on board include proximity, light, accelerometer, gyro, and compass.
Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, aptX HD, aptX Adaptive, GPS with A-GPS, GLONASS, GALILEO, BDS, NFC, and USB 2.0, Type-C 1.0 reversible connector. Both the front and rear gets protected by the Corning Gorilla Glass 5. The phone also gets support for face unlocks other than the fingerprint scanner.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? You Tell Us
How To Install AOSP Android 14 on Xiaomi Mi Note 10 Lite (toco)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Xiaomi Mi Note 10 Lite (toco) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Xiaomi Mi Note 10 Lite.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Xiaomi USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Xiaomi USB drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Xiaomi Mi Note 10 Lite’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Xiaomi Mi Note 10 Lite.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Xiaomi Mi Note 10 Lite (toco) here.
| Project Elixir | XDA Development Page |
| Lineage OS 21 | XDA Development Page |
| Evolution X | XDA Development Page |
| CrDroid OS | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Xiaomi Mi Note 10 Lite is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Xiaomi Mi Note 10 Lite comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Xiaomi Mi Note 10 Lite, flashing the ported Android 14 is an option. Although it seems like the Xiaomi Mi Note 10 Lite won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.