How to Install Stock ROM on Evertek V9 Plus [Firmware Flash File]

On this page, we will guide you on how to download and install the official firmware file on Evertek V9 Plus. This tutorial is easy to follow. Evertek V9 Plus is powered by a MediaTek MT6737 processor powered by Android 8.1 Oreo.

If you are someone who is facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. By using the firmware file, you can bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most of the software glitches by flashing the stock firmware.

Advantages of Installing Stock ROM

Here are some of the advantages of installing stock ROM on your Evertek V9 Plus:

• If your device is dead, you can unbrick using Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adwares from Evertek V9 Plus
• You can fix the boot loop issue on Evertek V9 Plus
• Fix Unfortunately, the app has stopped error on Evertek V9 Plus
• Fix Network related issue
• Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
• You can unroot Evertek V9 Plus
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore Evertek V9 Plus back to Factory State

Firmware Details

• Device Name: Evertek V9 Plus
• Gapps File: Included
• Device Supported: Evertek V9 Plus
• Tool Supported: SP Flash Tool
• Processor: MediaTek MT6737
• Android OS: 8.1 Oreo

Steps to Install Stock Firmware on Evertek V9 Plus

Now, before we get straight to the Steps to Install Stock Firmware on Evertek V9 Plus, let us take a look at some of the prerequisites.

Pre-Requirements:

• Supported device: Evertek V9 Plus
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Android USB Drivers

Download Flash Files

Software Details	Download Link
Flash File Name: EVERTEK_V9_Plus_V09_20180904 File Size: 1 GB Android Version: 8.1 Oreo	Download Link

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Make sure you follow and download all the required files and flash tools on your PC.
2. Open the flash tool exe file to open the SP Flash Tool User Interface
3. Once your load the SP Flash tool UI, Tap on Download option
   
4. In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
   
5. You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
6. Once you load the file, click the Download button
7. To start the upgrade process of stock ROM on your Evertek V9 Plus, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
8. When the phone connects, your device will start upgrading the stock firmware
9. You need to wait for a few minutes to complete the upgrade process.
10. Once the flashing process completes, you will find a green button which means a successful upgrade.
11. That’s it! You can reboot your Evertek V9 Plus

Follow our full-depth video guide below:

Video Guide to Install Stock ROM via SP Flash Tool

So that’s it guys, this was our take on How to Install Stock ROM on Evertek V9 Plus [Firmware Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.