How to Install Stock ROM on Alcatel TRU 5065N [Firmware Flash File/Unbrick]

Did you brick your device or Want to fresh install the Stock ROM on Alcatel TRU 5065N? then you are in the right place. Here we will guide on how to download and install the Stock firmware on Alcatel TRU 5065N. The device is powered by Qualcomm processor. To install Stock ROM on Qualcomm powered device, you need software known as QFIL Tool, Formally also called Qualcomm Flash Image Loader. Download the Alcatel TRU 5065N Stock Firmware, drivers and QFIL tool, then you can follow our guide to install the firmware on Alcatel TRU 5065N.

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. These feats can be achieved by providing root access to your device or simply rooting your phone.  In today’s date, rooting or customizing is no rocket science, but people perform these process carelessly. Certain users hastily carry out the modding/rooting process without properly following instructions. It leads to bricking of the device. It can happen with any device. In this post, we will tell you how you can restore or unbrick Alcatel TRU 5065N back to the previous working condition.

How to Install Stock ROM on Alcatel TRU 5065N

How to Install Stock ROM on Alcatel TRU 5065N

The guide is simple and easy! All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Alcatel TRU 5065N using QFIL Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem. Remember this guide is also very much needed in case of upgrade or downgrade the firmware on Alcatel TRU 5065N. First of all, download the software, Qualcomm Flash Image Loader on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Alcatel TRU 5065N using this guide.

The Advantage Of Stock ROM:

  • Flash Stock To Unbrick your Alcatel TRU 5065N
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Alcatel TRU 5065N
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Alcatel TRU 5065N
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jumping into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update the Stock ROM on Alcatel TRU 5065N.

Firmware Details:

  • Gapps File: Included
  • Device Supported: Alcatel TRU 5065N
  • Tool Supported: QFIL
  • Language Supported: Multi-Language

Download Firmware

Download Link Descriptions
Download Alcatel_OneTouch_Tru_5065N_MSM8909_20160705_5.1.1_QFIL.zip

Steps to Install Stock firmware on Alcatel TRU 5065N:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Advertisements

Pre-requisites

  • Supported device: Alcatel TRU 5065N
  • Charge your phone: You need at least a 50% charge on Alcatel TRU 5065N
  • Laptop or PC: To carry out this installation, you need a PC or Laptop.
  • Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.
  • Qualcomm Flash image loader: Download QFIL Tool
  • MsmDownload Tool: Download MsmDownload Tool and extract it (2nd method)
  • Install Latest Driver: Install the Latest  Alcatel USB Drivers. [For All Android USB Drivers]
  • Download: Download the above-required files on your PC.

[su_note note_color=”#fbf5c8″ text_color=”#000000″]

Disclaimer: We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

[/su_note]

Method 1: Install via QFIL Tool:

Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using QFIL tool

Advertisements
Guide to Install Stock ROM using QFIL Tool

Method 2: Install via MSMDownload Tool

  1. First of all, Download the file required above and extract it on your computer.
  2. Now in the extracted folder, Run the file named MsmDownloadTool.exe as an administrator
  3. When you see the screen, now turn off your phone
  4. Connect your phone to PC using USB Cable while pressing VOLUME UP button.
  5. Now on the MSMDownload Tool screen, load the firmware.
  6. You can now click the “START ALL” button to start upgrading your phone.
  7. Once the complete installation process is done, you can unplug your phone from PC.
  8. That’s it! Now turn on your phone and enjoy new Stock firmware on Alcatel TRU 5065N.

I hope you installed the Stock ROM on Alcatel TRU 5065N successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.