BLU G9 G0130WW Firmware Flash File (Stock ROM 9.0 Pie)

In this tutorial, we will guide you on how to flash the firmware file on your BLU G9 G0130WW. The device came out of the box with an Android 9.0 Pie under the hood Mediatek MT6762 processor.

Due to the open-source nature of Android, most Android users want to customize their devices via unlocking the device bootloader, flashing Custom ROM, Custom Recovery, Rooting, and more. But in that case, the users may experience lags or bugs or some errors on their devices. Installing the Stock ROM can fix most of the issues properly.

Even sometimes, due to improper flashing or unsupported files, your device may be bricked or stuck into the boot loop issue. Additionally, if you’re facing battery draining, performance issues, software update issues and want to flash the firmware file again on your BLU G9 device, check out the download links, pre-requirements, and complete installation guide as well.


BLU G9 Device Overview

BLU G9 was announced in May 2019 which sports a 6.3-inch IPS LCD display with a screen resolution of 1520 x 720 pixels with 267 PPI pixel density. The device is protected by a 2.5D curved glass screen.

BLU G9 is powered by a MediaTek Helio P22 (MT6762) chipset coupled with 4GB of RAM and 64GB of internal storage. It also supports an external memory card. The device came out of the box with an Android 9.0 Pie and backed by a 4000 mAh battery (Non-removable).


As far as the camera concerned, the device has a Dual-camera setup with 13MP + 2MP primary sensors and a selfie camera with a 13MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The BLU G9 comes with a rear fingerprint sensor feature.

Stock Firmware and its Advantages

The Stock ROM comes with preloaded in a smartphone or tablet device with minimal customizations but offers better stability and performance. It doesn’t come with the unlocked bootloader or custom recovery installed on your device. But the Android users manually flash Custom Firmware or other custom files in order to tweak their devices.

Therefore, using the Custom ROM may give you plenty of options but don’t have the stability. Most of the Custom ROM comes with full of bugs and you can’t use it as a daily driver.

Here we have mentioned some of the Stock ROM advantages below:

  • Can unbrick your BLU G9 device.
  • Fix the device boot loop issue by flashing Stock ROM.
  • Upgrade and Downgrade Stock ROM version.
  • Unroot or Fix Software Bugs on your phone.
  • Fix battery draining issue.
  • Fix the lag or stutter on your device.
  • Get back your device warranty (if applicable).

Firmware Details:

  • Device Name: BLU G9 G0130WW
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6762 SoC
  • Android OS: Android 9.0 Pie
  • File: Stock ROM
  • Gapps: Included

Steps to Install Stock ROM on BLU G9

Now, let’s take a look at the download link and pre-requirements from below before going to the installation steps.


Download Firmware Files:

Flash File Details Download Link
Flash File Name:
File Size: 1.5 GB
Version: Android 9.0 Pie

Installation steps:

We’re at GetDroidTips won’t be responsible for any kind of damage or error that occurs to your device during or after following this guide or installing any file. Proceed at your own risk.

Now let’s go to the Stock ROM installation process. Check out the full guide to install the Stock ROM on your BLU G9 device.

Flash stock ROM using the SP Flash tool

You can also check out our full-depth video tutorial as well.

Video Guide to Install Stock ROM via SP Flash Tool

We hope that this guide is helpful to you and you’ve successfully installed the stock firmware on your BLU G9 device. For any queries, feel free to write down in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.