Install Stock ROM On Moto G6 and G6 Plus (Back to Stock, Unbrick, Downgrade, Bootloop)

Here we will guide on how to install Stock ROM On Moto G6 and G6 Plus. Download the ROM and required files and then follow this guide.

Motorola Moto G6 is the sequel to Moto G5 which was launched last year. In this year’s Moto G6, Motorola has swapped out the metal enclosures of last year’s G5 for glass. Both the smartphone comes with decent specs to bit the luxury budget category so many companies, from Honor to Xiaomi, are vying to win. Both the device comes out of the box with Android 8.0 Oreo. Do you Want to Install Stock ROM On Moto G6 and G6 Plus? then, you are at the right place. If you own a Moto G6 and G6 Plus smartphone and searching for the Stock Firmware then you are at the right place. Here I will guide you to install official stock ROM on Moto G6 and G6 Plus smartphone.

Motorola Moto G6 Specification:

Moto G6 features a 5.7-inches display with a screen resolution of 1080 x 2160 pixels. The smartphone is powered by Octa-core 1.8 GHz Cortex-A53 and Qualcomm SDM450 Snapdragon 450 coupled with 3/4GB of RAM. The phone packs 32GB or 64GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Moto G6 comes with Dual 12 MP (f/1.8) + 5 MP (f/2.2), phase detection autofocus, dual-LED dual-tone flash camera and 8MP front shooting camera with LED flash.

Motorola Moto G6 Plus Specification:

Moto G6 Plus features a 5.9-inches display with a screen resolution of 1080 x 2160 pixels. The smartphone is powered by Octa-core 2.2 GHz Cortex-A53 and Qualcomm SDM630 Snapdragon 630 coupled with 4/6GB of RAM. The phone packs 64/128GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Moto G6 Plus comes with Dual 12 MP (f/1.7) + 5 MP (f/2.2), phase detection autofocus, dual-LED dual-tone flash camera and 8MP front shooting camera with LED flash.

Android 8.0 Oreo Update?

Check Out the List of Android Oreo supported device. If your device is not on the official list, then upgrade to Android 8.0 Oreo via Custom ROM. Here is the List Of Devices Getting Lineage OS 15.0

This guide is simple and easy to follow. We have listed the Official Stock ROM for Moto G6 and G6 Plus below. Download the required file to either upgrade or downgrade your Moto G6 and G6 Plus. This guide is followed by a software known as ADB and Fastboot method which is simple and easy. You can just flash the firmware on Moto G6 and G6 Plus using the ADB and Fastboot command. Follow the steps carefully to flash the firmware on Moto G6 and G6 Plus using the guide.

We ask you to read the steps before doing something wrong. READ READ READ!! Once you are done! Now you can download the USB Drivers, ADB and Fastboot tool, and the stock ROM from the below Pre-Requisite note.

Install Stock ROM On Moto G6 and G6 Plus (Back to Stock, Unbrick, Downgrade, Bootloop)

Page Contents

Guide To Install Official Stock ROM On Moto G6 and G6 Plus

Guide To Install Official Stock ROM On Moto G6 and G6 Plus

Download the ROM which we have listed in this table below. This guide is helpful to those who are looking to Downgrade or upgrade your smartphone. You can anytime flash the stock ROM on Moto G6 and G6 Plus. This guide is also helpful to unbrick the phone (roll back the dead phone), you can install the Stock Firmware build to revert back to old version also. Also if you feel your Moto G6 and G6 Plus lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your Moto G6 and G6 Plus.

Here are below for Android 8.0 Oreo firmware Update for Moto G6 and G6 Plus. To install the Stock Firmware on Moto G6 and G6 Plus, Please follow the guide and download the ROM, Moto G6 and G6 Plus Latest USB Drivers and ADB and fastboot tool on your computer. This guide is for How to Install Stock ROM on Moto G6 and G6 Plus smartphone.

The Advantage Of Stock Firmware:

Flash Stock To Unbrick your Moto G6 and G6 Plus
Flash Stock ROM to Fix the boot loop problem
Upgrade and Downgrade Moto G6 and G6 Plus
Unroot or Fix Bugs on your phone
To fix the lag or stutter on Moto G6 and G6 Plus
By flashing Stock ROM, you can solve software problems.
Revert back to stock to gain your warranty.

READ THIS CAUTION:

So before jumping into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM on Moto G6 and G6 Plus.

Download Minimal ADB and Fastboot Tools Zip
Download the Motorola Device Driver
Charge your phone for at least 70%
Backup your device just in case if you need it later
You need either Laptop or PC

Required ROM Files

ALI_OPS27.82-19-4_cid50 Firmware – Moto G6 [Ali]

EVERT_OPW27.113-27 – Moto G6 Plus [Evert]

You can download any one of the above Stock ROM files

Steps to Install Firmware on Moto G6 and G6 Plus:

There are two methods which you can follow. Check any of the methods, if the first method doesn’t work, you can simply follow the second method to install the stock firmware on Moto G6 and G6 Plus.

Method 1:

In this first method, you need download and install the ADB and Fastboot tool along with Motorola USB Drivers. After installing you can simply follow the link below to sideload the ROM on your phone.

Guide to flash the firmware using ADB Sideload

Method 2:

[su_note note_color=”#fffdc4″ text_color=”#000000″]Before proceeding to install, make sure your phone has enough battery backup with at least 50% battery. Also, don’t forget to take the full backup to avoid any problem in case things go wrong. [/su_note]

First of all, Unlock the bootloader on your phone. If your device is already unlocked, then skip this step.
Now Install and Setup the ADB Fastboot on your PC.
Move the downloaded Moto G6 and G6 Plus firmware to adb fastboot folder.
Now boot your Moto G6 and G6 Plus into bootloader mode by turning the phone off, press and hold the VOLUME DOWN + POWER button simultaneously for few seconds until you see the bootloader menu on your phone screen.
Once you are in the bootloader menu.
Connect your Moto G6 and G6 Plus to PC using USB Cable
Open the ADB Folder where you extracted the firmware file.
In the adb folder, hold the Shift Key (keyboard) and click the Right-click button (mouse) on any empty screen inside the ADB Folder.
You will be seeing this option to open the command window.

Once you see the command screen, now you can type the below command one by one on your PC.

mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot reboot-bootloader
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2 
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase ddr
fastboot reboot

Congrats, you have completed the process to Install Stock ROM Update on Moto G6 and G6 Plus.

I hope this guide was helpful to install the Stock Firmware on Moto G6 and G6 Plus. If you have any queries or feedback, please leave your comment down below.

Comments

Durga Shanker says:

September 24, 2019 at 3:12 pm

I need to downgrade android version from 9 to 8 in my Moto G6, will this step be sufficient in doing this ? Please let me know

Install Stock ROM On Moto G6 and G6 Plus (Back to Stock, Unbrick, Downgrade, Bootloop)