Today we have good news for all the Xiaomi Mi 9 SE European variant users. Today Xiaomi started rolling the stable Android 10 update for Mi 9 SE in Europe with the software version MIUI 18.104.22.168.QFBEUXM.
If you’re waiting for the stable official Android 10 update for a while on your Mi 9 SE European unit, then this guide is for you only. Here you can easily download and install the latest firmware update on your handset by following the guide below along with download links, requirements, and installation steps. The new firmware update also brings February 2020 Android Security Patch Level with increased system security and fixed data usage warning that appeared multiple times.
To recall, the Xiaomi Mi 9 SE was launched in March 2019 with a 5.97-inches Super AMOLED display, Android 9.0 Pie, Snapdragon 712 SoC, paired with 6GB RAM, 64GB/128GB of internal storage, a triple rear camera setup with 48MP+8MP+13MP lens, and a 20MP selfie camera. The handset packs a 3070mAh battery, 18W fast charging support, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, A-GPS, GLONASS, NFC, USB Type-C port, etc along with an in-display fingerprint sensor, and other sensors.
As the firmware update is rolling out in batches via OTA, it’s quite possible that some of the users may get the OTA update notification quite late than expected. However, you can check for OTA updates or manually flash the firmware as well. So, let’s check out the full article.
Table of Contents
Check Software Update (OTA)
In order to check the firmware update on your device manually, you can head over to the device Settings >> About Phone >> Software update >> Check for update. Alternatively, you can go to the Software Updater app to check the OTA update.
Now, if you find that there is an update available on your device, just download and install it. Once installed, your device will automatically reboot into the new system and it may take some time to boot for the first time. So, please be patient.
- Ensure that the device is connected to a Wi-Fi network.
- Try to charge your phone up to 50% at least before doing anything.
Changelog: MIUI 22.214.171.124.QFBEUXM
- Updated Android Security Patch to February 2020. Increased system security.
- Stable MIUI based on Android 10
Steps to Install Xiaomi Mi 9 SE Android 10 update (126.96.36.199.QFBEUXM)
If in case, you’re not receiving the latest firmware OTA update notification on your device, you can manually install the firmware update by following the full-depth guide below. Ensure to follow all the requirements and download links below before flashing the firmware.
- This Europe Stable ROM is exclusive for the Xiaomi Mi 9 SE (pyxis) European variant devices.
- Make sure to charge the device more than 60% at least.
- You will require a PC/Laptop and a USB cable.
- Take a full device data backup (No Root).
- Download all the necessary files or tools or drivers on your computer.
Instructions to Install:
Make sure to follow all the requirements and downloads properly. Then you can follow the below guide to install the MIUI 188.8.131.52.QFBEUXM Europe Stable ROM on your Xiaomi Mi 9 SE. You can choose either Recovery method or Fastboot method according to the firmware.
Alternatively, check out the video tutorial below for visual support:Video Guide on Steps to Flash Xiaomi Device using Fastboot Method
We hope this guide was helpful to you and you’ve installed or updated the stable Android 10 update on your Xiaomi Mi 9 SE (pyxis) European variant successfully. If you’ve any queries, let us know in the comments below.