Amazon Echo is a fantastic home gadget that lets you connect to various devices simultaneously. It operates on voice-based commands where Amazon Alexa is always there to respond to your orders. You can use the Amazon Echo to control your smart TV, lights, or other smart appliances present in your home. You can even instruct the speaker to stream podcasts, audiobooks, and songs, all at a single command.
But despite its features, it is still not the best out there. This is because it has its fair share of bugs, and one of the known ones is the device not turning on at all. There is no point in having a device that does not turn on. So to fix this, you must try all the solutions mentioned in this article and check which one works for you. So without any further ado, let’s get into it.
Also Read
Page Contents
How to fix Amazon Echo not turning on?
Amazon Echo connection is set up using Bluetooth on your phone and the speaker. So if anything is wrong with the connection, that could cause problems with turning on the device. A worst-case scenario could be a hardware defect like a dead battery. For that, you will need to get the faulty part replaced by the official service center. Whatever the case, let’s look into all the solutions now.
Unplug the Echo:
As simple as it may sound, unplugging can help if you have been using the device for a long time. After excessive usage, Amazon Echo can get hot, which might malfunction in that scenario. So unplug your Amazon Echo from the power source and let it rest for a couple of hours. This will cool down the device.
After this, try using it again. If it does not turn on, move on to the next solution.
Change the Power outlet:
Amazon Echo won’t turn on if its power is not consistent. If you have connected the adapter to a power outlet that is not in the best condition, that could also cause the device not to turn on. To fix this, you need to remove the adapter from the power outlet where it is plugged and plug the adapter into a different socket.
Try the next solution if changing the power outlet does not turn on your Amazon Echo device.
Change the adapter:
The adapter you are using to supply to your Amazon Echo is used when the device is turned on. So if there is a chance there is an issue with it, you need to get it replaced. To check for any faults, you can use one of your friend’s adapters whose device works well. If your Amazon Echo turns on with that adapter, it is time you purchase a new adapter for your Amazon Echo device.
Try the next solution if changing the adapter also does not turn on your Amazon Echo device.
Clean the speaker port:
The port on your speaker that you connect your cable to for power might be faulty over time. There could be some dirt that could be causing the problem, or the port might be damaged altogether. To verify this, use your charging cable and adapter with another device. If it works well with other devices, you can consider that the port could be damaged. In this case, you need to take your Amazon Echo to the nearest service and get the port fixed.
If you notice no faults with the port on the speaker, move on to the next solution.
Check your internet connection:
Your Amazon Echo device requires an active internet connection with proper speed to operate or function properly. If the internet connection is unstable, the Echo device won’t respond to your commands, and you might think it is a dead unit. So try changing the connection to the Amazon Echo device and check whether that solves the problem.
If it does not work, try the next solution.
Reboot Amazon Echo:
This is a simple fix. To reboot the Amazon Echo device, you must keep it disconnected for a few minutes. Just remove the adapter from the power source and wait for a couple of minutes. After that, plug the adapter back into the speaker and try using it usually.
Try the next solution if you still can’t get it to turn on.
Unmute microphone:
Another possible reason why Amazon Echo might not respond to your commands and act as a dead unit is if the microphone is muted for the device. With the microphone set to mute, the Amazon Echo device won’t be able to capture any voice input sent to it.
Just press the microphone button on the Echo device to enable the microphone on it, and then try using the commands. If it still does not work, try the next solution.
Replace the circuit board:
With overheating and excessive usage, hardware damage is a given outcome. And with the Amazon Echo, there have been instances where the circuit board for the device was damaged. The Amazon Echo can’t turn on if the circuit board is damaged. To fix this hardware issue, you need to visit the nearest service to replace the circuit board entirely.
Replace the motherboard:
Besides the circuit board, we should also consider the fault with the motherboard. Users have reported faulty motherboards on their Echo devices after years of usage. To fix this, again, you need to visit the nearest service and get the part replaced entirely.
So these are all the solutions to fix the Amazon Echo not turning on issue. If you have any questions or queries about this article, comment below, and we will get back to you. Also, check out our other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.