Making and receiving calls is the basic functionality of a smartphone. And if you are getting difficulties in this too then this will be a very shame for the flagship brands like in this case Samsung. Follow this troubleshooting guide to fix if you Can’t Make Calls or Receive Calls on Samsung Galaxy A50.
Also Read
With an Android, making and receiving phone calls is immensely easier. You get connected with the other contact within fractions of a second. But, several users keep complaining about instances when they can’t make or receive calls on Android phones. We have listed a few methods with which you can get rid of this problem. Our phones have become such a multipurpose tool that we sometimes forget what they were originally designed for. Imagine this scenario – you’re was well into the afternoon before you realized that your iPhone wasn’t able to dial out. You’ve been heavily relying on data and WiFi, using a variety of texting apps, check your email, and searching the internet for a whole slew of unimportant trivia before even noticing the glitch.
Usually, some quick troubleshooting will do the trick. It works for most of us – a quick software update and you’ll be yammering away like there wasn’t a problem in the first place.
Page Contents
- Possible Reasons for this Issue
- Fix, Can’t Make Calls or Receive Calls on Samsung Galaxy A50
- Conclusion
Possible Reasons for this Issue
- There may be a network issue at that moment.
- There may be a software glitch creating this problem.
- There may be a hardware problem resisting to make or receive calls.
- There may be any app creating this issue.
Fix, Can’t Make Calls or Receive Calls on Samsung Galaxy A50
Verify signal strength
In a lot of network issues, poor or weak signal is to blame. If your Samsung Galaxy A50 is showing No Service all the time recently, be sure to check how the signal bars are showing on your device. Anything lower than 3 bars is not good and can indicate a network issue.
If you are inside a building, try to go out and see if No Service goes away. If you are traveling by car, you may be transiting a dead spot. What you want to do is to move a known well-covered area. If No service remains, there may be an issue with your Samsung Galaxy A50. Continue troubleshooting it by following the steps below.
Simple Reboot or Forced reboot
Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always the ultimate solution for any issue. Not only Galaxy but this applies to every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.
Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.
The other way of the reboot is as follows:
- Press and hold the Volume Down button.
- While holding it down, press and hold the Power key.
- Keep the button held for 10 seconds, it will be restarted automatically.
If this doesn’t work then head to the next method.
Rebooting your device regularly at least once every week can be beneficial. If you tend to forget things, we suggest that you configure your phone to reboot on its own. You can schedule it to do this task by doing these steps:
- Open the Settings app.
- Tap Device Care.
- Tap the 3-dot at the top.
- Select Auto restart.
Troubleshoot Phone app
Force quit the app
This is usually recommended to fix minor app bugs. There are two ways to do this.
Method 1: Close an app using Recent Apps key
- On your screen, tap the Recent Apps soft key (the one with three vertical lines on the left of the Home button).
- Once the Recent Apps screen is shown, swipe left or right to look for the app. It should be here if you managed to run it previously.
- Then, swipe up on the app to close it. This should force close it. If it’s not there, simply tap the Close All app to also restart all apps.
- Open the Settings app.
- Tap Apps.
- Tap the More settings icon (three-dot icon, upper right).
- Tap Show system apps.
- Find and tap the app.
- Tap Force Stop.
Clear app cache
If restarting the three SIM apps did not help, follow it up by clearing the apps’ cache. Here’s how it’s done:
- Go to the Home screen.
- Tap Apps icon.
- Open the Settings app.
- Tap Apps.
- If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
- Select Show system apps.
- Find and tap the appropriate app.
- Tap Storage.
- Tap the Clear Cache button.
- Restart the device and check for the problem.
Clear app data
Clearing an app’s data will return it to its factory state.
- Go to the Home screen.
- Tap Apps icon.
- Open the Settings app.
- Tap Apps.
- If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
- Select Show system apps.
- Find and tap the appropriate app.
- Tap Storage.
- Tap the Clear Data button.
- Restart the device and check for the problem.
Clear Cache from Recovery Mode
In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume button to go to Wipe Cache Partition then press the Power button to confirm the selection.
- Wait until your device wipes out all cache or temporary data from the system partition.
- Press the Power button again to reboot the device.
This clears all the temporary data from the device. And then it works like new.
Update to Latest Software
- Open Settings from either the Quick Nav menu or the launcher.
- Go to the More tab, then tap on the About device.
- Tap on the Software update.
- If a system update is available, you’ll see the option on the screen. Tap Download and Install.
- If your system is up to date, you will see a message stating that the system is up to date.
That is all. You have successfully checked for a system update on your Samsung Galaxy A50.
Here are a few things that are needed to take care of while updating your Samsung Galaxy A50 or any device:
- Your device must be connected to the internet.
- Your device must have enough space to download the update.
- Your device should have enough charge, more than 50% to install the update.
Troubleshoot apps in Safe Mode
In case you don’t know what is safe mode, in safe mode, the system temporarily disables all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:
- Turn OFF the device.
- Press and hold your device’s Power button till the model name screen.
- When the SAMSUNG logo appears on the screen, release the Power key.
- Immediately after releasing the Power key, press and hold the Volume down key.
- Continue to hold the Volume down key until the device finishes restarting.
- Safe mode will display in the bottom left corner of the screen.
- Release the Volume down key when you see Safe Mode.
After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):
- Open Settings from Launcher.
- Tap on Apps.
- Tap See All Apps.
- Tap an app that you want to uninstall
- Tap Uninstall.
- Tap OK to confirm.
Reset Network Settings
- Open Settings from either the Quick Nav menu or the launcher.
- Scroll down and tap on General management.
- Then tap on Reset.
- Finally, tap on Reset network settings.
- Then tap on Reset settings.
- Confirm with your lock screen password when prompted.
Factory Reset
Disclaimer
- Open the Settings from the launcher.
- Scroll to and tap General management.
- Tap Reset.
- Select Factory data reset.
- Tap Reset to continue.
- Tap Delete All to confirm the action.
From Recovery:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
- Press the Power button to select ‘Wipe data/factory reset.’
- Use Volume Down to highlight Yes.
- Press the Power button to confirm the action to clear your phone data.
Contact your carrier
No Service bug can be caused by an issue from your network operator so you won’t be able to fix it on your end at all. Talk to your carrier and let them check the problem if nothing is fixed after a factory reset.
Conclusion
These were the few methods to troubleshoot the problem/issues you were facing with your Samsung Galaxy A50. If it is yet not solved then there might be another issue, check and fix that issue from our Samsung Galaxy A50 Troubleshooting Guide. If you still can’t get through the issue then there might be another issue that can only be cured by a certified technician.
Do you own a Galaxy Device, or any Android device and need these types of simple tutorials? Then stay tuned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Galaxy are coming soon.
If you have any queries regarding this, the comment section is always available for you.