There is no doubt that the Apple Watch is one of the most advanced smartwatches available today. With its fitness tracking, messaging, phone calls, and heart rate monitoring features, you can feel the best experience with the Apple watch. However, the Apple Watch and iPhone play a great role with each other. Unfortunately, the Apple Watch may occasionally experience such issues with the iPhone. One such frequent issue is the “No iPhone connection” error on Apple Watch.
Numerous users have faced this “No iPhone Connection” error in recent weeks, whereas most users complain that they are unable to connect their Apple Watch to their iPhone. This problem might be annoying, especially if you depend on your Apple Watch for day-to-day activities. Don’t brood, if you have the same issue with your Apple watch. This article will provide the most effective way to fix the “No iPhone Connection” error on your Apple Watch. Without any further ado, let’s get right to it.
- How to Fix No iPhone Connection Error on Apple Watch
- Fix 1: Check Your Apple Watch Connection
- Fix 2: Toggle Airplane Mode
- Fix 3: Toggle Bluetooth/Cellular/WiFi
- Fix 4: Restart Your Apple Watch and iPhone
- Fix 5: Reset Network Settings
- Fix 6: Update Carrier Settings (iPhone)
- Fix 7: Update Your Apple Watch
- Fix 8: Check for Software Update (iPhone)
- Fix 9: Erase Your Apple Watch and Repair it
- Fix 10: Contact Apple Support
How to Fix No iPhone Connection Error on Apple Watch
Errors like “No iPhone Connection” on Apple Watch mainly occur due to improper functioning of Bluetooth or poor WiFi/cellular network. It is possible that due to software bugs and glitches, your Apple watch is showing “No iPhone Connection” error. Therefore, these are some of the reasons why the Apple watch is not connected with your iPhone. Now, let’s focus on the troubleshooting strategies we have listed below in this article. Make sure to follow every solution and then you can easily resolve the problem.
Fix 1: Check Your Apple Watch Connection
If you are having an issue with “No iPhone Connection” error on your Apple Watch, it is likely possible that your watch is not connected with the iPhone. For such a situation, you don’t get any notifications, messages, or calls on your Apple Watch. Make sure to check the status of your Apple Watch.
Although, when your devices disconnect, the red iPhone icon or the red X icon appears on your watch face. You can also verify the connection directly from the Control Center. On the other hand, when your Apple Watch connects again, then you will see the green iPhone icon on the screen. Here’s what you need to do.
First, bring your Apple Watch and paired iPhone close together. Ensure the WiFi and Bluetooth connectivity is enabled. Try to connect your Apple watch with your iPhone and check if it’s connecting. If the issue persists, then follow the below solutions.
Fix 2: Toggle Airplane Mode
If you are encountering an issue with “No iPhone Connection” error on Apple Watch, you should try toggling Airplane Mode. The Airplane Mode has one of the knack of fixing random glitchy networks that help you in fixing the connection error on your Apple Watch. Therefore, before trying any other solutions, it would be better to try this method. Here’s what you need to do.
On your Apple Watch, swipe up from the bottom of the watch face to launch the control center. Tap on the Airplane mode button to disable it. Wait for a moment and then tap the Airplane mode button again to enable it back. That’s how you can toggle Airplane mode on Apple Watch.
On your iPhone, swipe down from the top right corner of the screen to open the control center menu. Tap the Airplane mode icon to turn it on and wait for a moment. After that, tap the Airplane mode icon to turn it back on. Now try connecting your Apple Watch with your iPhone and check if the issue has been fixed.
Fix 3: Toggle Bluetooth/Cellular/WiFi
If the Airplane mode solution fails to work with your Apple Watch, try toggling the Bluetooth, cellular and Wi-Fi connection. Usually, Apple Watch uses Bluetooth and Wi-Fi to stay connected with the paired iPhone. However, if your device has a cellular network connection, then your Watch can stay connected through the cellular network only.
To preserve battery, Apple Watch generally uses Bluetooth function to stay connected to the iPhone when the iPhone is near and eligible to connect. But when Bluetooth isn’t available, the Apple Watch uses Wi-Fi or cellular network to connect to the iPhone device. So, if you are unable to connect your Apple watch with your iPhone, then you should try to turn off/on Bluetooth and cellular/Wi-Fi networks.
Head over to the Settings app on your iPhone and disable the Bluetooth/Cellular and Wi-Fi settings. Once you have disabled it all, wait for a few minutes and then turn on these toggles you have disabled before. Now try to connect your Apple Watch with your iPhone device and check if the issue has been resolved. If the issue persists, try the next solution we have listed below.
Fix 4: Restart Your Apple Watch and iPhone
The other most powerful solution is to restart your Apple Watch and iPhone at the same time, if you are still unable to connect your watch with your device. It’s one of the most workable methods of all time in fixing various issues like freezing, stucking, app not loading and much more. Therefore, you should try this method if you are having an issue with the Apple watch. Here’s how you can restart your watch and iPhone.
Force Restart your Apple Watch:
To restart your Apple Watch, press and hold the Digital Crown (Side button) until you see the Apple logo on the screen.
Force Restart Your iPhone:
To restart your iPhone device, press and quickly release the Volume Up button. Then, press the Volume Down button and quickly release it. Next, press and hold the Power button (Side button) until the screen goes black and the Apple logo appears on the screen. Once the device is successfully restarted, try connecting your watch with your iPhone and check if the problem has been resolved.
Fix 5: Reset Network Settings
If you are still encountering the same issue on your Apple Watch, try resetting the network settings. Most of the time, this method is known for the workable methods in terms of connectivity issues. Make sure to remember that by resetting network settings, it will completely erase all the network settings including the saved Bluetooth device, Wi-Fi passwords and more.
To reset network settings on your iPhone, head over to the Settings app > General. Navigate to Reset > Reset Network Settings and confirm it by tapping on Reset settings. Once you have successfully reset the network settings on your iPhone, head over to the control center on your watch and check if the connection is back or the issue persists. If this solution doesn’t work, try to attempt other solutions.
Fix 6: Update Carrier Settings (iPhone)
Generally, carrier providers roll out updates to solve network related issues which also improves the overall performance. Usually, the Apple Watch uses the cellular of your iPhone for connection, and make sure the carrier settings are updated to the most recent version. In case you are using an outdated carrier setting, you may face several issues on the device. Make sure to update carrier settings on your iPhone and try checking the results.
To check for carrier updates on iPhone, go to the Settings app and tap on General > About. Here, you may get a carrier settings update on the screen, if there is an update available, ensure to download and install it by clicking on the Update option and then you are good to go!
Fix 7: Update Your Apple Watch
Errors like “No iPhone Connection” on Apple Watch are also caused by software bugs and glitches. However, it is possible that due to an outdated Apple watch version, you might encounter an issue with the Apple watch. No less to blame for various unrelated problems than software faults. Well, the good news is that Apple frequently releases watchOS upgrades to fix issues and improve overall performance.
Therefore, a simple software update can help you in fixing the random issue you are facing on your iPhone device or with Apple watch. However, it also improves the overall performance of the watch and you can feel the best experience ever by updating the watch. So, never miss out any updates related to software as it plays a vital role in making the wearable device run smoothly.
The method to update the software system of the watch is pretty simple. Simply, open the Watch app on your iPhone and choose General. Next, tap on Software Update. Download and install the latest version of the WatchOS on your Apple Watch if the update is available on the screen.
If you are using another Apple watch with WatchOS 6 or later, update the WatchOS software from the Apple Watch itself. Open the Settings app and tap on General. Next, tap on Software Update. Download and install the latest version of the WatchOS on your Apple Watch if the update is available on the screen.
Fix 8: Check for Software Update (iPhone)
You also have to update your iPhone software system to the latest version, if you are running on an outdated version. Here’s how you can check for software updates on your iPhone:
- Open the Settings app on your iPhone.
- Tap on General.
- Next, tap on Software Update.
- If an update is available, download and install.
- Once successfully downloaded, restart your iPhone.
Note: While updating the device to the latest software version, make sure you are connected with a stable and strong internet connection. A stable internet connection is required to update the pending iOS updates.
Fix 9: Erase Your Apple Watch and Repair it
If you have tried the above solutions and it fails to work in resolving the connection error on your Apple watch, it is suggested you erase your Apple watch and re-pair it again. By erasing all content and settings of the Apple Watch, you are easily able to connect your Watch with your iPhone. But if you are worried about losing your Apple Watch data then don’t fret. The smartwatch allows you to take a backup of the entire data of your Apple Watch, so you no need to worry about losing your watch data.
Here’s how you can erase your Apple watch and re-pair it by following the below steps:
- Open the Settings app on your Apple Watch.
- Choose General.
- Scroll down and tap on Reset.
- Tap on Erase All Content and Settings.
- Confirm the process to erase all your content and settings.
Alternatively, you can erase your Watch from your iPhone device itself. Open the Watch app on your iPhone and tap on General. Select Reset > Erase All Content and Settings. Confirm the action by clicking on the Erase all content and settings.
Once your Apple Watch has been erased, pair your Apple Watch with your iPhone device again and check if it’s connecting. Simply, bring your iPhone closer to your watch and follow the on-screen prompts to connect your watch with your iPhone.
Fix 10: Contact Apple Support
If none of the above workarounds helps you in fixing the “No iPhone Connection” problem on Apple Watch, you should contact the Apple customer support team for further assistance. They will likely offer you their best suggestions, and you’ll be able to reconnect your Apple Watch once more. You can also go to a nearby Apple store or service center to get assistance.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.