Xiaomi Poco X4 Pro 5G Bluetooth Problem (Solved)

In this tutorial, we will guide you on how to fix the Bluetooth connectivity or not pairing problem on the Poco X4 Pro 5G. The device was launched globally at MWC 2022. The device sports a triple camera setup which houses a 108-megapixel primary camera. It is powered by a Qualcomm Snapdragon 695 SoC under the hood and runs on a 5,000mAh battery. Xiaomi Poco X4 Pro 5G came out of the box with Android 11 on top of MIUI 13.

Transferring data over Bluetooth is slow, but that isn’t its only application. As smartphones are getting rid of the headphone jack, Bluetooth-paired wireless headphones are a craze; and the Poco X4 Pro 5G does the same. In any case, we have a tonne of questions on Poco X4 Pro 5G Bluetooth problems that users are facing, and there are too many.

We accounted for most of the issues and tried troubleshooting methods that you can use to fix the Poco X4 Pro 5G Bluetooth problems in a few minutes. Of course, this guide can be used to fix Bluetooth problems and issues on all Android devices.

Poco X4 Pro 5G Device Overview:

The Poco X4 Pro 5G boasts a 6.67-inch AMOLED panel with a 120 Hz refresh rate. It’s an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. The screen has a peak brightness of 1200 nits. Underneath, it is powered by the Qualcomm Snapdragon 695 5G processor, built on a 6nm manufacturing process. It’s an octa-core processor with two Kryo 660 Gold cores clocked at 2.2 GHz and six Kryo 660 Silver cores clocked at 1.7 GHz. For handling graphics-intensive tasks, it comes with the Adreno 619. The smartphone runs Android 11 out of the box with MIUI 13 skin.

Talking about the camera, we have a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup includes a 108MP primary sensor paired with an f/1.9 lens, a 64MP wide sensor paired with an f/1.8 lens, and a 2MP macro sensor paired with an f/2.4 lens. The selfie camera at the front is a 16MP primary sensor paired with an f/2.5 lens. However, both the front and rear camera systems are limited to 1080p video recording.

The smartphone offers four storage options: 64GB internal storage + 6GB RAM, 128GB internal storage + 6GB RAM, 128GB internal storage + 8GB RAM, and 256GB internal storage + 8GB RAM. Additionally, it comes with a hybrid microSD slot for storage expansion. For connectivity, it supports Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, GPS, NFC, Infrared port, FM radio, and USB Type-C 2.0. It also features a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. It packs a 5000 mAh battery that can be charged quickly using a 67W power adapter. The company claims the phone goes from 0 to 70% in 22 minutes and 0 to 100% in 41 minutes. The smartphone is available in three color options: Laser Black, Laser Blue, and Poco Yellow.

How To Fix Poco X4 Pro 5G Bluetooth Problem?

In Some Poco X4 Pro 5G smartphones, users report that they cannot pair with any smartphone, sometimes Bluetooth disconnects, audio distortion in Bluetooth headsets, Bluetooth not working, and more. If you are someone who is facing any Bluetooth issues on your Poco X4 Pro 5G, then try these troubleshooting tips.

Restart the phone

Software glitches are a thing, and there’s no denying it. It could trigger at any time, and that is why sometimes even a flagship phone tends to stutter a bit. Talking about Poco X4 Pro 5G Bluetooth Problem, it is possible that when you tried to connect to a Bluetooth device, the software intercepted a bug or error causing issues like not being able to connect or transferring issues or even as early as not being able to detect a Bluetooth device.

Restarting the phone is a swiss army knife of Bluetooth troubleshooting methods as it tends to fix a string of issues, and you’ll have to do it. Try doing the same for the recipient or sender device too.

Toggle Bluetooth Connectivity

Assuming that you were able to connect to a Bluetooth device, if the phone rejected the connection or you weren’t able to discover the said device, why not try toggling the Bluetooth connection. Bring down the Notification Panel and double tap on the ‘Bluetooth’ tile to disable and enable it. You can do it a few times just in case.

Toggle Airplane Mode

Just like any other connectivity-linked issue, Airplane Mode could interfere with Bluetooth connectivity, causing the system to fail to register to a Bluetooth device or slow transferring issues over Bluetooth. Simply go to the Notification Panel and tap twice (or in pairs) to toggle airplane mode or flight mode. This should enable and disable the airplane mode (that’s why in pairs). Check if the issue has been fixed or not.

Set Your Phone’s Bluetooth To ‘Discoverable’

Some smartphones have a feature called “Discoverable” or its synonym that, only when enabled does the other device discover your device. If you forget to make your device discoverable, no amount of toggling Bluetooth or Airplane Mode or any of the methods listed here won’t work. The recipient device won’t be able to detect your device, so there’s nothing you can do until you enable it.

Distance Matters

Some users would connect to a Bluetooth device and travel far from each other, thinking it will work. Bluetooth devices have a range, and just like Wi-Fi, as you draw farther from the other device, the network strength grows weaker. This could cause a slow transferring rate or abrupt disconnection (or/and connection in a loop).

Remove older connections

My Sennheiser wireless earphones continue to pair up with my PC when I turn it ON to watch a movie on my phone. This is because the earphones were paired on both the devices, and depending upon which device intercepts it first and other metrics, it connects to the laptop instead of my phone.

The simple fix is to unpair the unwanted device (e.g., laptop, in this case) and pair it up with the phone. Based on which device you are trying to connect over Bluetooth (speakers, accessories, smartphones, etc.), you could have multiple connections, so this trick would work.

Forget and Pair

One of the common Poco X4 Pro 5G Bluetooth problems is probably not being able to connect to a Bluetooth device that you have previously connected with. Here, you can use a trick called forget and repair. For this to work, you need to forget the Bluetooth device and pair again, and there’s a greater chance that the bug would subside.
Step 01: First up, go to Settings >> Bluetooth >> Connected Devices.
Step 02: Find the network you want to forget. Since you tried connecting to the said network, it should be under the “Discovered/Paired” section.
Step 03: Long-press or tap on the gear icon against the said network and tap on ‘Forget Device’. Note that the procedure for this step could differ from phone to phone.
Step 04: Now that you have successfully forgotten the network, connect it as usual and check if the problem has been sorted or not.

Clear Bluetooth Cache

Cache on an Android smartphone is both a boon and a curse in some cases. Regarding Bluetooth issues, cache built-in can interfere with working on Bluetooth on Poco X4 Pro 5G. Deleting the Bluetooth cache can resolve the problem at once.
To clear Bluetooth Cache, here’s how you can do it.
Step 01: Go to Settings on your phone and proceed to “Apps & Notifications.”
Step 02: Tap on the 3-dot icon on top to see “System apps” and search for “Bluetooth”. Tap on it when you find it.
Step 03: Go to “Storage & Cache” and clear it. This should help fix the impending Poco X4 Pro 5G Bluetooth Problem.

Reset Bluetooth Settings

It is quite possible that some settings have gone haywire and that is where resetting it works. This will restore the network settings to factory settings and hopefully, it will fix the problem as well.
Step 01: Navigate to the Settings app on your phone and proceed to “Connection & Sharing”.
Step 02: Next up, select “Reset Wi-Fi, mobile networks, and Bluetooth”.
Step 03: Finally, click on “Reset Settings” and that should restore settings related to Bluetooth, Mobile Data, and Wi-Fi alike.

Incompatible Driver

If you are trying to connect the phone to the PC via Bluetooth, an incompatible driver can hamper the connection. It is recommended to update the Bluetooth driver on your PC to test if this method worked or not.

Update the OS

Incompatible software on the smartphone’s front can cause Bluetooth to suffer wrath. If you are facing this Bluetooth problem on Poco X4 Pro 5G (or any other smartphone), update its software and check if the problem works or not.

Pull Off a Factory Reset

This is the last resort but you should know that doing so will technically remove all the data from your phone permanently. Take a backup if you consent to it and proceed. You can use the phone’s Settings app to commence, proceed “About Phone >> Factory Reset” and select “Erase All Data” and it is done. Set up the device as a new one and check if the Bluetooth issue has been fixed or not.

Still facing Bluetooth problems on Poco X4 Pro 5G?

Although I am not certain that you are facing this issue, assuming that you have followed the troubleshooting guide mentioned above to fail to start Bluetooth, your phone will likely have a hardware issue. The Bluetooth system on your phone has hardware aka chip and it might be facing issues. You have two options. Either walk into a third-party service center (and void warranty, if any, but cheaper) or an authorized service center (warranty stays intact but could be expensive).

We are at the end of this troubleshooting guide on how to fix the Poco X4 Pro 5G Bluetooth Problem. Hopefully, Bluetooth on your phone has started working properly irrespective of the issue it had including ‘Bluetooth not connecting’, ‘Bluetooth disconnecting’, ‘Bluetooth not detectable’, ‘transferring data is slow on Bluetooth’, and others.