It seems that using and cleaning your home or office can become time-consuming or messy especially if you’ve kids or pets mostly on the floor etc. That’s why the iRobot Roomba vacuum cleaners come in handy in most scenarios whatsoever. But what’ll happen if the Roomba Won’t Dock? Well, you can follow this guide to fix this issue.
Although you can easily contact the iRobot customer support team and ask for technical help on it or ask for repairing or even replacing it (if there is a hardware fault). But you should always want to know that what happened actually or is there any way to fix this issue manually by yourself. There can be several reasons behind it such as battery not charging, battery dying before docking it, etc.
Roomba Won’t Dock, How to Fix It?
So, you should have already known that one of the most common issues in iRobot Roomba vacuum cleaners is their battery. Because they mostly occur issues or started troubling the users due to several reasons. But the battery unit doesn’t charge at all is a typical issue apart from the vacuum cleaner won’t dock issue too. Don’t worry as here we’ve shared the useful guide to resolve this issue completely.
Like a vacuum cleaner, all iRobot Roomba cleaners basically return to the home base to dock itself once the cleaning cycle is completed or whenever it runs out of battery juice. So, after connecting to the dock base or home base, the robotic cleaner starts charging its battery again. Meanwhile, you can also manually send your robot to the dock itself so that you don’t need to wait for the cleaning cycle to over or completely draining the battery.
1. Check Charger Condition
- First of all, make sure to take a quick look at the charger cable whether it has been physically damaged or not.
2. Properly Connect the Charger
- Second, you’ll need to connect the robot cleaner to the charger and then plug the charger adapter into the power outlet or wall socket to ensure the battery is charging properly.
- You should also check whether the solid green indicator is displaying the power or not.
3. Plug-in Charger to Dock
- Whenever you connect to the charger, ensure that the charger is properly plugged into the home base or dock of the Roomba vacuum cleaner.
4. Check for Virtual Walls
- Next, make sure to cross-check for virtual walls (if any). Although the virtual wall lighthouse will stay around 8 feet from the home base, that can also avoid infrared beam hindrance in some scenarios.
5. Remove Obstacles from Bumper and Docking Path
- Remove obstacles from the bumper and path of the docking station so that the Roomba cleaner can find its own way easily.
6. Use Dry Cloths to Wipe Out Debris
- Try using dry cloths to clean out debris from the Roomba cleaner underneath as well as the Roomba charging contacts on the home base for proper connectivity.
7. Place Dock at an open area
- Make sure to set the home base in an open area rather than keeping it within a congested room or area.
8. Place Roomba cleaner within the range
- Then put the Roomba vacuum cleaner within the 6 feet range of the home base and make sure to press the dock button to monitor its movement precisely.
You should also cross-check some of the following possibilities that may cause issues to your Roomba cleaner. Such as:
- Find out and clear debris under the docking unit as well as under the vacuum cleaner.
- Find out and remove or shift obstacles that may block the sensors.
- Try checking for poor Roomba cleaner sensors.
- Check whether the docking station pins are operating correctly or not.
This is how you can easily fix Roomba won’t dock issue completely. However, if the problem still persists, then we’ll recommend you to contact to iRobot Support for further help on it.
That’s it, guys. We assume this guide was helpful to you. For additional queries, you can comment below.