Fix: Samsung Dishwasher Keeps Blinking Normal Light

Samsung dishwashers use several blinking light configurations to let the user know what’s going on in the machine internally. The lights may indicate a potential error, warning or anything similar. One of these lights is the standard light which denotes different things with different configurations.

Some users have posted on forums that they see the normal light blinking and wonder what that could mean. If you are one of these users, this article will help you out. Here we will discuss what normal light blinking is all about and how to get rid of it. So without any further ado, let’s get into it.

Fix: Samsung Dishwasher Keeps Blinking Normal Light

How to fix Samsung Dishwasher Keeps Blinking Normal Light?

The standard light blinking on a Samsung dishwasher means that the dishwasher’s sensors detect moisture somewhere in the machine. It could be that the detergent is overfilled, or you forgot to remove the disposable cap from the slot. The device usually has an auto drain feature to take care of it. But if the light blinks continuously, it would only mean that the auto drain feature is not doing its trick.

This usually happens when there is a leak in the machine, and it’s tricky to determine the exact location of the leak just by looking at the device. Reasons behind the leak could be clogged sink drains, damaged seals or hoses, clogged dishwasher nozzles, or u-level dishwashers.

Well, whatever the issue in your case, we have compiled every possible solution here. Try one key after the other until you find the one that works for you.

Clear Clogged Sink Drains:

Clogged Sink drains are evident even without the blinking light. And if you think that is the issue, you can try the following things.

One solution is to use a commercial drain cleaner that does the job for you. And the other solution is a more hands-on approach where you need to take care of it physically.

Just place a bucket below your sink’s strap and 5en disconnect the pipe from your drain. After this, remove the clog from the drain pipe or strap and reconnect your lines. You can even contact a plumber to do this job for you.

Try the next solution if this does not solve the everyday blinking light problem.

Fix Damaged Seals Or Hoses:

Now it’s time to check your dishwasher’s seals and hoses for possible damages. You need to check the water supply hose, the drain hose and the rubber seal around the dishwasher door.

If you find any moisture or water puddle around these areas, that is your problem. That is where they leak it. To fix it, you can either call a Samsung support person or, if it’s a small leak, you can fix it on your own via some tools. If you are unsure whether you can do it, it would be wise to call a plumber here.

The Samsung dishwasher comes with a water inlet valve where the hose connects to the dishwasher. You should thoroughly check that. On top of it, you should also check the rubber gasket fastened to the inside of the door. It is there to keep all the water and soap inside while washing. At times it might not function properly, which is when you might get a leak. So ensure that it is performing its function.

Try the next solution if there is nothing wrong with the seals or hoses.

If you find any issues, do not run your dishwasher until you replace the compromised parts.

Clear Clogged Dishwasher Nozzles Or Drain Filters:

After seals and hoses, you must check the nozzles and drain filters. You need to remove them from their locations and clean them up properly. One good practice is to soak the nozzle and drain filters in white vinegar all night. That takes care of most of the accumulated junk.

Try the next solution if this does not resolve the normal light blinking.

Unlevel Dishwashers Or Loose Cabinet Screws:

If the dishwasher is not set up correctly, it can show random leaks at any time. So you need to take up the time to set up the dishwasher correctly. You should probably call a professional to align the dishwasher properly. Doing so will mean you will not end up with gaps between dishwasher components, there will be no racks that make a sound during operation, and there will be no visible faults in the setup overall.

So these are to fix the regular blinking light issue on your Samsung dishwasher. If you have any questions or queries about this article, comment below, and we will get back to you. Also, check out our other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.