Samsung has a wide range of products, from home appliances to small gadgets, that caters to the everyday needs of every individual. However, some Samsung dishwasher users have reported that they are facing troubles with their devices. Even when the dishwasher is led, the detergent dispenser is complete, and the rinse agent has been poured, the device won’t start, no matter how it pushes the button.
This is a common problem troubling several users, and it can be fixed easily by trying out some standard solutions with simple steps. If you are one of the troubled Samsung dishwasher users, this article will help you out. Here, we have listed all the solutions with a helpful guide on following them. So without any further ado, let’s get into it.
Also Read
Page Contents
How to Fix Samsung Dishwasher Not Turning On?
The solutions mentioned here are essential and should work for you unless your device has an actual hardware defect.
Ensure the power switch is turned on:
The dishwasher must have its power source connected to the power supply to get the necessary power. If a switch is next to it, ensure it is turned on. Much like every other power outlet, no power will be supplied to the dishwasher if this switch is turned off.
If the switch is turned on and the power supplied to the dishwasher is consistent, but you still can’t turn it on, try the next solution.
Samsung Dishwasher door switch:
The door switch present in the door will disable the dishwasher from running if the door is not closed correctly. But sometimes, if the door switch is faulty, the dishwasher washer won’t run even if the dishwasher is completed correctly. So check the door switch with a multimeter and check whether it works perfectly. If it is not working correctly, replace it.
However, if the switch is working fine, but you still can’t get the machine to start, try the next solution.
Check the thermal fuse:
There is a thermal fuse inside the dishwasher, which, when overheated, can prevent the dishwasher from functioning. And if for some reason, it is blown, that will prevent the dishwasher from starting up as well. To check the fuse, you need to use a multimeter. If you find out that it is not working correctly, replace it.
However, if the thermal fuse is working fine, but you still can’t get the machine to start, try the next solution.
Check the door latch:
A door latch on the dishwasher ensures that the door is shut correctly or not. But if it is broken, the door will remain open no matter how often you try to close it. To fix this, you need to replace the door latch entirely.
If the door latch is working fine, but you still can’t get the machine to start, try the next solution.
Drain pump:
There is a drain pump present in the dishwasher that removes the water from the tank at various times to ensure that there is a proper flow of water. Before a cleaning cycle, if there is some water not drained by the drained pump, that would prevent the dishwasher from starting. It can happen if there is any malfunction in the drain pump or if there is any blockage in it. So check the drain pipe and ensure that the excess water is removed via it.
If the drain pipe drains out the residual water properly but you still can’t get the dishwasher to start, try the next solution.
Check the touchpad:
The touchpad where you have the start button could also be faulty. This would prevent the machine from starting as well. So try pressing all the buttons on the touchpad and check whether all of them are working correctly or not. If the touchpad is faulty, it won’t work. And in that case, you will have to replace the touchpad entirely. You usually cannot get the touchpad individually, as it is part of a package with a control panel. So purchase the touchpad and the control panel and then replace them entirely.
If the touchpad is working fine but still can’t get the dishwasher running, try the next solution.
Configure the control panel correctly:
As mentioned above, sometimes the touchpad can malfunction, and it might be a fault on the touchpad or the associated control panel. So try getting a replacement for your touchpad and control panel and check whether that solves your problem.
If changing the control panel does not help with the machine starting up, try the next solution.
Also Read
Check the control board:
The control board present in the dishwasher is responsible for providing power to all the electrical components in it. If the control board is faulty, the dishwasher will not operate properly and won’t start at all. So check your control board for any faults, and if you find anything, replace it by any means possible.
If the control is not faulty, or changing it does not help, try the next solution.
Set the timer:
The timer can be set in the dishwasher to tune the power flow to different machine parts. If the timer is not set correctly or misdiagnosed, your machine will have a tough time starting up. So try and fix this by setting up the timer correctly.
If the issue is not with the timer, try the next solution.
Check the circuit breaker:
The circuit breaker of your connection might have some tripped circuits. So perform a thorough check on your power supply and look for any possible tripped circuits. If you see one, flip the course off and then turn it on again. If it continues to stumble, contact a local engineer to fix the issue.
If even this did not help with the dishwasher not starting up, try the next solution.
Contact support:
If none of the solutions mentioned above worked for you, it is time you get it checked by a customer support executive. To do this, visit the nearest Samsung Support Center and inform the employees about the issue you are having with your dishwasher. They should be able to provide you with a proper resolution.
So these are the solutions to fix the Samsung dishwasher not turning on. If you have any questions or queries about this article, comment below, and we will get back to you. Also, check out our other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.