How to Fix if Touchscreen is Not Working Properly on Poco X2?

The touchscreen issue is one of the most common issues any Android User faces. It doesn’t matter you own a Premium smartphones like Poco X2 or any mid-range/budget device. Eventually, you will face the issue. Are you facing the same issue with your Poco X2, then you need to follow the below troubleshooting guide in which we have discusses a few methods to fix if Touchscreen is not Working Properly on Poco X2.

But a bad touchscreen isn’t always the result of a hardware failure. If your phone’s touchscreen often fails to respond or has entirely malfunctioned, there’s a lot you can do before getting professional help.

The phone touch screen could stop working for many reasons:

• Physical damage. The touch screen is broken or damaged. High temperature, cold, moisture, magnet, static electricity can all damaged touchscreen on Android phone;
• Malicious or performance-draining apps that crash the phone so the touch screen is unresponsive;
• Android system crashes after a firmware update, ROM flashing, etc.
• Wrong settings. A factory reset could restore the phone to default settings and fix the problem.

Fix, Touchscreen is not Working Properly on Poco X2

Check for hardware damage

If your Poco keeps restarting by itself after it was dropped or hit by a solid object, the most likely cause of the problem is bad hardware. In this case, the best thing that you can visit your local Xiaomi store or Service Center so a qualified technician can examine the device. If needed, they may send it in for repair or replacement.

Take off the screen protector

The next thing that you can do is to see if a screen protector is affecting the sensitivity of the digitizer. Try cleaning the screen with a clean, soft cloth. If that won’t fix the problem, just remove the screen protector entirely (if you’re using one, of course). Hopefully, that will bring the device to its working standard order, and everything would be fine.

Simple Reboot or Forced Reboot

Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Poco but this applies to every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.

Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.

The other way of the reboot is as follows:

• Press and hold the volume down button first and don’t let go.
• Press and hold the power key while holding down the volume down button.
• Keep both keys held down for 15 seconds or more.

If this doesn’t work then head to the next method. Rebooting your device regularly at least once every week can be beneficial.

Check for Black Screen problem

As the name suggests, a Black Screen issue’s primary indicator is the fact that the screen remains black no matter what one does. In this situation, the rest of the phone’s functions are working except for the screen. In this case, the best thing that you can visit your local Xiaomi store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Update apps

To check for Play Store app updates on your Poco:

• Open Play Store app.
• Tap More settings icon at the upper left (three horizontal lines).
• Tap My apps & games.
• Tap Update or Update All.

If you are on Cellular Data connection, we suggest that you update via wifi only to avoid additional charges. Here’s how:

• Open Play Store app.
• Tap More settings icon at the upper left (three horizontal lines).
• Tap Settings.
• Tap App download preference.
• Select Over wifi only (select Over any network if you don’t have wifi).
• Tap Done.

Make sure to also keep your apps updated all the time by enabling auto-update option.

• Tap Auto-update apps.
• Tap Over wifi only (select Over any network if you don’t have wifi).
• Tap Done.

Clear Cache from Recovery Mode

In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:

• Turn off your phone.
• Now Press and hold Volume UP key + Power Key  on your Poco device simultaneously for a while
• Once you see the Poco logo, you can release the button.
• The phone is now booted in recovery mode
• Use Volume keys to navigate to the Wipe cache partition option
• To confirm, you can use the Power button.
• Restart your phone

Troubleshoot apps in Safe Mode

In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:

• Your device must be powered on.
• Press the power button on the phone.
• When the power off, restart, airplane mode, wifi mode, etc. menu will be displayed, release the power button.
• Now, long-press the Power OFF word on the screen.
• Keep pressing this word until the Android Safe Mode message is being displayed on your phone.
• Select to reboot into Android Safe Mode.
• When done, a dedicated Safe Mode watermark will be displayed on your smartphone
• Observe the phone and check for the problem.

After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):

• Open ‘Settings’ from either the Quick Nav menu or the launcher.
• Scroll Down and Tap ‘Apps’.
• Now, tap on ‘Manage Apps’
• If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
• Tap ‘Show All Apps’.
• Find and tap the appropriate app.
• Tap Uninstall.
• Tap OK to confirm.

Factory Reset

From the Settings menu:

• Open ‘Settings’ from either the Quick Nav menu or the launcher.
• Scroll Down and Tap ‘My Device’.
• Now again scroll down and tap ‘Backup & Reset’.
• Now finally scroll till the end and tap ‘Erase all data (Factory Reset)’.
• Now, tap on the ‘Delete all data’ button that is located at the center bottom of the screen.
• Now, it will ask for your lock screen password, confirm it.
• Again it will ask your Mi account password.
• Enter the password and tap the Ok button.

From Recovery:

• Turn off the device
• Press and hold Volume Up key + Power Key
• Release Power key when POCO logo appears but keep pressing Volume Up key
• Release Volume Up key when Mi-Recovery Appears
• Use Volume keys to select and Power key to confirm
• Select Wipe Data and press power key to confirm
• Select wipe all data and press power key to confirm
• Select Confirm press power key to confirm
• Select “back to main menu” by press power key
• Select Reboot and press power key to confirm
• Select Reboot to System and press the power key to confirm.

Conclusion

That was it, this was the easiest way to Fix when Touchscreen is not Working Properly on Poco X2. Follow them carefully to get benefits of the feature in your Poco X2. Are you facing any problems and issues with your Poco X2? Then there is nothing to worry about, we have an article dedicated to Poco X2’s issues and guides. Here is the Poco X2 Troubleshooting Guide. Although it’s rare, some cases of the issues on Poco devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Mi Store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Do you own a Poco Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Poco are coming soon.

If you have any queries regarding this, the comment section always available for you.