Vivo Y01 Software Update | PD2140NF_EX_A_3.4.6 (October 2022)

Vivo Y01 was launched in India that features a 6.51-inch display that runs on Android 11 (Go edition) based on Funtouch 11.1. Under the hood, it is powered by a Mediatek MT6765 Helio P35 SoC coupled with up to 3GB RAM support.

It is promised to get regular software updates and security patches. However, it’s not new that some users haven’t received the latest firmware OTA update notification. Meanwhile, some Vivo Y01 PD2140NF owners mostly look for the stock ROM to install. We will share the latest Vivo Y01 software update details on this page.

As mentioned, the firmware OTA always updates rollout in batches region-wise, which also depends on the server and carriers. So, it’s one of the common issues not receiving any OTA update notification. Therefore, some keen users may also miss out on important or much-awaited updates in some cases. Now, if you also feel the same and have doubts that you’ve missed out on any important update or want to install the stock firmware on your Vivo Y01 model manually, then the update tracker list with the software update guide will help you a lot.

Vivo Y01 Software Update

Vivo Y01 Device Overview:

The Vivo Y01 features a 6.51 inches IPS panel with a 60 Hz refresh rate. It is an HD+ panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. Under the hood, we get the Mediatek Helio P35 processor built on a 12 nm manufacturing process. It is an octa-core processor with four Cortex-A53 cores clocked at 2.35 GHz and four Cortex-A53 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the PowerVR GE8320. The smartphone comes with Android 11 out of the box with Funtouch 11.1 skin running on top.

In terms of optics, we get a single rear camera setup and a single selfie camera at the front. The rear camera is a 13 MP primary sensor with an f/2.2 lens. The selfie camera at the front is a 5 MP wide sensor paired with an f/2.2 lens. The rear camera can capture 1080p videos, while the front camera is limited to 720p video recording.

The smartphone comes in two storage options: 32GB internal storage + 2GB RAM and 32GB internal storage + 3GB RAM. We also get a dedicated microSD slot for storage expansion. Regarding communications, we get WiFi 802.11 b/g/n, Bluetooth 5.0, GPS, FM Radio, and micro USB 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, compass, and proximity. Powering it all is a 5000 mAh battery that supports standard quick charge. The smartphone has two color options: Sapphire Blue and Elegant Black.

Advertisements

Software Update Tracker

Whenever a new official firmware update is available for the Vivo Y01 model, we will keep updating the update tracker list here with the changelog and download links below.

Software Version Changelog
PD2140NF_EX_A_3.4.6

Download

September 2022 Security Patch

How to Check Software Update on Vivo Y01 PD2140NF

Before going to the manual firmware upgrade process, you can manually check for the software update if you feel that your device isn’t receiving the OTA update notification for a while. To do this:

Go to the device Settings > System updates. It will search for the software update, and you will get notified if a new update is available on your device. Simply grab the firmware version by downloading and installing it.

Additionally, it’s recommended to maintain the phone charge by at least up to 50%-60% and connect your device to Wi-Fi for a faster and more stable download.

Advertisements

Update Guide: How to Flash Vivo Firmware on your device [Software update guide]

Suppose you’ve successfully upgraded your Vivo Y01 PD2140NF device to the latest software version. Facing any issues with the software update guide? Comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.