Alfawise X Smart Projector Stock Firmware – 3200 Lumens [6.0 Marshmallow] – How to Install

Here we have shared the files to download and install Stock Firmware on Alfawise X Smart Projector which is powered by Amlogic S905X processor. Alfawise X Smart Projector comes packed with Android 6.0 Marshmallow firmware with a screen resolution of 1280 x 800 and supports up to 4K resolution. A wonderful projector with large projection size. Energy-saving LED lamp is adapted for high brightness up to 3200 lumens. If you are looking for Alfawise X Smart Projector Stock Firmware, then you are in the right place.

Don’t worry, you know sometimes things do not go too well with Android Projector. One of the easiest and quick fixes for most of the issues on the Android Projector is just installing latest Stock firmware on Alfawise X Smart Projector. So, today, in this post, we would be covering on How to Install Alfawise X Smart Projector Stock Firmware. Now, if that sounds interesting, let us top into it. Should we?

Advantages of Installing Stock ROM

Here are some of the advantages of installing stock ROM on your Alfawise X Smart Projector:

• You can unbrick your bricked device.
• Fix the boot loop issue by installing the Stock ROM.
• To upgrade or downgrade.
• To fix bugs lags on your Android Device.
• This Software Update helps to solve the issue with WiFi, Bluetooth and more.

So, now let us move on to the Alfawise X Smart Projector Stock Firmware section. Should we?

Download Firmware:

Steps to Install Alfawise X Smart Projector Stock Firmware

Now, before we get straight to the Steps to Install Alfawise X Smart Projector Stock Firmware, let us take a look at some of the prerequisites.

Prerequisites

• Please note that this guide will work only with the Alfawise X Smart Projector.
• You should have a formatted USB Drive for this guide.
• Make sure that you turn on your Projector until the installation process completes.

Once you have the above prerequisites, you can proceed to Instructions to Install Alfawise X Smart Projector Stock ROM.

Instructions to Install:

Here are the instructions you need to follow in order to install Stock firmware on the Alfawise X Smart Projector :

1. First of all format your USB Pen Drive to FAT32 slot
2. Now download the ROM package and move it to the root directory of the SD Card.
3. You need to connect your USB drive to the device using USB 2.0 Jack.
4. Now on your project, Go to Settings -> Update –> Choose Local Storage.
5. Wait for a couple of minutes until the device restarts automatically.
6. After the restart is completed, enjoy the new update.

So that’s it guys, this was our take on How to Install Alfawise X Smart Projector Stock Firmware [Stock ROM Flash File]. We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.