Fix Bixby Crashing Problem or Not Working on Galaxy A50

Samsung is persistent in making Bixby the default assistant for all of its flagship devices. There is no doubt over the fact that Bixby works exclusively well with Galaxy devices, especially when it comes to personalized commands. For those of you who love Bixby smart assistant for what it is, the issue of Bixby crashing or simply not working can be a strenuous one. If you are facing the issue in your Galaxy A50 where Default Phone is Crashing then there is nothing to worry about. Here, in this guide, we have covered various methods to fix when Bixby Crashing Problem or Not Working on Galaxy A50 in very simple steps.

The error Bixby Voice keeps stopping that seems to be bothering some owners of the Samsung Galaxy A50 is actually not a serious problem. Apparently, Bixby Voice is one of the services of Samsung’s Bixby assistant. By default, Bixby is enabled on new Samsung devices but users can find ways to disable it. When they do, that could be the reason why this issue occurs.

In this post, I will walk you through in troubleshooting your Galaxy A50 with this kind of problem. We will look into each possibility and rule them out one after another until we can determine the cause of this problem, and hopefully be able to fix it. If you’re one of the owners of this phone and are currently being bugged by a similar issue, continue reading as this article may help you.

Galaxy A50

Possible Reasons Behind the Issue

Memory Management

One of the biggest problem areas according to virtually everyone I spoke to is memory management. An app might be spinning too many threads and soaking up memory resources or running on a system that has too many apps open.

Software Lifecycle

The iterative app development process, with its constant series of frequent releases, opens doors for getting to market with a minimum viable product and then improving it over time, building an audience.

Advertisements

Network management

As apps have increasingly come to depend on network access, either for data or for third-party services, network management has grown as a source of trouble.

Fix Bixby Crashing Problem or Not Working on Galaxy A50

Troubleshoot Bixby Service

Force Quit

This is usually recommended to fix minor app bugs. There are two ways to do this.

Method 1: Close an app using Recent Apps key

  • On your screen, tap the Recent Apps soft key (the one with three vertical lines on the left of the Home button).
  • Once the Recent Apps screen is shown, swipe left or right to look for the app. It should be here if you managed to run it previously.
  • Then, swipe up on the app to close it. This should force close it. If it’s not there, simply tap the Close All app to also restart all apps.

Method 2: Close an app using App Info menu

Advertisements
  • Open the Settings app.
  • Tap Apps.
  • Tap the More settings icon (three-dot icon, upper right).
  • Tap Show system apps.
  • Find and tap the app.
  • Tap Force Stop.

Clear Bixby Service cache

  • Open Settings from either Quick Nav menu or the launcher.
  • Tap Apps.
  • If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  • Select Show system apps.
  • Find and tap the appropriate app.
  • Tap Storage.
  • Tap the Clear Cache button at the bottom.

Reset Bixby Service

  • Open Settings from either Quick Nav menu or the launcher.
  • Tap Apps.
  • If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  • Select Show system apps.
  • Find and tap the appropriate app.
  • Tap Storage.
  • Tap the Clear Data button.

Simple Reboot or Forced reboot

Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Galaxy but this applies to each and every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.

Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.

Advertisements

The other way of the reboot is as follows:

  • Press and hold the Volume Down button.
  • While holding it down, press and hold the Power key.
  • Keep the button held for 10 seconds, it will be restarted automatically.

If this doesn’t work then head to the next method.

Advertisement

Rebooting your device regularly at least once every week can be beneficial. If you tend to forget things, we suggest that you configure your phone to reboot on its own. You can schedule it to do this task by doing these steps:

  • Open the Settings app.
  • Tap Device Care.
  • Tap the 3-dot at the top.
  • Select Auto restart.

Update to Latest Software

Follow the below steps to update system software:

  • Open Settings from either Quick Nav menu or the launcher.
  • Go to the More tab, then tap on About device.
  • Tap on the Software update.
  • If a system update is available, you’ll see the option on the screen. Tap Download and Install.
  • If your system is up to date, you will see a message stating that the system is up to date.

That is all. You have successfully checked for a system update on your Samsung Galaxy A50.

Here are a few things that are needed to take care while updating your Samsung Galaxy A50 or any device:

  • Your device must be connected to the internet.
  • Your device must have enough space to download the update.
  • Your device should have enough charge, more than 50% to install the update.

Reset app preferences

  • Open the Settings from the launcher.
  • Tap Apps.
  • Tap on More settings at the upper right (three-dot icon).
  • Select Reset app preferences.
  • Restart your Galaxy and check for the problem.

Reset Network Settings

  • Open Settings from either Quick Nav menu or the launcher.
  • Scroll down and tap on General management.
  • Then tap on Reset.
  • Finally, tap on Reset network settings.
  • Then tap on Reset settings.
  • Confirm with your lock screen password when prompted.

Clear Cache from Recovery Mode

In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:

  • Turn off your phone.
  • Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
  • When the green Android logo displays, release both buttons.
  • The Recovery screen menu will now appear
  • Use the Volume button to go to Wipe Cache Partition then press the Power button to confirm the selection.
  • Wait until your device wipes out all cache or temporary data from the system partition.
  • Press the Power button again to reboot the device.

This clears all the temporary data from the device. And then it works like new.

Troubleshoot apps in Safe Mode

In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:

  • Turn OFF the device.
  • Press and hold your device’s Power button till the model name screen.
  • When the SAMSUNG logo appears on the screen, release the Power key.
  • Immediately after releasing the Power key, press and hold the Volume down key.
  • Continue to hold the Volume down key until the device finishes restarting.
  • Safe mode will display in the bottom left corner of the screen.
  • Release the Volume down key when you see Safe Mode.

After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):

  • Open Settings from Launcher.
  • Tap on Apps.
  • Tap See All Apps.
  • Tap an app that you want to uninstall
  • Tap Uninstall.
  • Tap OK to confirm.

Factory Reset

Disclaimer

Factory reset will delete everything, so you want to make sure that you create a copy of your data such as photos, videos, documents, texts, etc. ahead of time.

From the Settings menu:

  • Open the Settings from the launcher.
  • Scroll to and tap General management.
  • Tap Reset.
  • Select Factory data reset.
  • Tap Reset to continue.
  • Tap Delete All to confirm the action.

From Recovery:

  • Turn off your phone.
  • Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
  • When the green Android logo displays, release both buttons.
  • The Recovery screen menu will now appear
  • Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
  • Press the Power button to select ‘Wipe data/factory reset.’
  • Use Volume Down to highlight Yes.
  • Press the Power button to confirm the action to clear your phone data.

Conclusion

That was it, this was the easiest way to Fix Bixby Crashing Problem or Not Working on Galaxy A50. Are you facing any problems and issues other than this with your Galaxy A50? Then there is nothing to worry about, we have an article dedicated to Galaxy A50’s issues and guides. Here is the Galaxy A50 Troubleshooting Guide. Although it’s rare, some cases of the issues on Samsung Galaxy devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Samsung store or Service Center so a qualified Samsung technician can examine the hardware. If needed, they may send it in for repair or replacement.

Do you own a Galaxy Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Galaxy are coming soon.

If you have any queries regarding this, the comment section always available for you.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.