Fix: Sony Pulse 3D Not Charging

Sony’s Pulse 3D headset is a must-have accessory for people who enjoy intense gaming sessions with their consoles. This wireless headset comes with an A-port adapter that must be connected to a PS5 or PC’s USB port. Once the adapter is connected to the device and the headset is turned on, the device will connect to the headset automatically.

But this product from Sony is not entirely error-free. Many users have complained about issues with the charging mechanism of the headset, and some people are still struggling to find a fix. Most users complain that the headset is not charging, even when the charger is plugged into the headset. Usually, users can use a charging adapter or a USB port on a PC or PS5 to charge it, but it does not always work well. So let us take a look at what we can do from our side to resolve this problem. Without any further ado, let’s get into it.

Fix: Sony Pulse 3D Not Charging

How to fix Sony Pulse 3D not charging issue?

Some users have complained that when they plug in the charger, they hear one beep, and an orange light lights up. But right after that, there is no more blinking, and the device does not charge. Usually, when the headset is charging, it blinks orange and stops when the charge is complete. If that is not happening with your Pulse 3D, try the below solutions.

Check the battery percentage:

Different indicator mechanisms show information about the battery percentage on this headset. Let’s first understand how that works.

If you press the Chat button + Volume Down button at the same time. You will hear beeps, and a purple or orange light will blink depending on the battery percentage. If the purple light blinks three times and you hear three beeps, the headset is fully charged. Again, if the purple light blinks twice and you hear two beeps, the headset is medium charged. Now, if the purple light blinks three times and you hear one beep, it indicates a low battery. Finally, if you see an orange light blink fast and hear one beep, the headset immediately requires a charge. The battery is completely drained.

So if it is the first scenario with your Pulse 3D, the charge on it is complete, and you do not need to worry about it. However, if it is any other cases, try the solutions mentioned below.

Quick workaround:

Some users have found a workaround for the specific problem. It has worked for many users, so you should also try it.

  • Connect the headset to your PS5 or PC.
  • Plug in the charger.
  • Then turn off the headset while it is plugged and connected to the PS5.

This should get your headset charging normally again.

But if this does not work with your headset, try the next solution.

Disable Rest Mode:

The PS5 has a rest mode that works actively to control battery usage. When the headset is connected to the console, it is attached as an accessory, and usually, rest mode disconnects or limits the accessory’s functionality. So if it is turned on in your PS5, it is time you disable it. Let’s see how you can do that.

  • Open up Settings on your console.
  • Go to System.
  • Now, go to Power Saving.
  • Select Feature Available in Rest Mode.
  • Here, set the Supply Power to USB ports to Always.

Now try charging the headset with your PS5’s USB port again. If it still does not work, try the final solution mentioned below.

Reset the headset:

If none of the above solutions worked for you, try resetting the Pulse 3D.

  • Turn off the headset.
  • Connect the USB wireless adapter to your console.
  • Insert a pin or toothpick into your wireless adapter’s hole surrounding the reset button.
  • Push in for at least a second and then release it. This will reset the headset.

To hard reset your headset, you need to follow additional steps.

  • Keep the headset set to Off.
  • Press and hold the Chat and Volume + buttons on your headset.
  • While holding the Chat button and the Volume + button, slide the headset’s power switch on.

If the reset is successful, the headset and adapter will connect again. And plugging in the charging will also charge the Pulse 3D normally again.

So these are the solutions to fix the Sony Pulse 3D not charging issue. If you have any questions or queries about this article, comment below, and we will get back to you. Also, check out our other articles on iPhone tips and tricks, Android tips and tricks, PC tips and tricks, and much more for more helpful information.

Comments

  1. None of these tricks worked for me. I treat my stuff well and don’t man-handle them so maybe I got a bad headset..? The orange light only blinks once when plugging in the USB. The Chat/Volume+ trick does not reset anything. Not a single light or beep. Your article was top tier and to the point but my advice would be on what to do if nothing works at all. Which is my current question. What do I do?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.