Without having an internet connection on your computer, it’ll be like a body without a soul in this era. Whether you’re working or streaming content or even study, a proper network connection is always important. However, nothing is permanent in this world and so the internet connection. If you’re also facing Network Connection Issues on Windows 10, follow this troubleshooting guide.
It’s quite obvious and common for users to have issues with the internet connection whatsoever. Either you’re a mobile device user or a computer user, you may find a slow internet connection or even no internet error message while browsing. This can happen with both the Wi-Fi and Wired connections on your Windows 10 PC/Laptop at any time.
Now, if you experience such an issue quite often on your Windows 10 computer that means there are some possible reasons behind it which can be fixed very easily by following this full guide. It’s also worth mentioning that although you have a good internet connection, you may encounter several network connectivity issues these days while gaming, streaming, browsing, downloading content, etc.
Also Read
Page Contents
Fix: Network Connection Issues on Windows 10
Luckily, here we’ve shared a couple of possible workarounds that should help you out of this network connectivity issue. So, without further ado, let’s get into it.
1. Reboot Your Computer
It’s needless to say that a simple restart of your computer can also fix several network connectivity issues completely. Sometimes a networking glitch or temporary cache data can cause such issues. So, just reboot your computer to check whether the problem has been fixed or not. If not, you can follow the next method.
2. Set Correct Date and Time
Well, set the correct date and time can also fix several issues on the Windows system whatsoever. An incorrect date and time can conflict with server connectivity as well as internet connectivity that should be corrected. To do so:
- Right-click on the date/time from the Taskbar.
- Select Adjust date/time > Here you can manually set the date and time according to your time zone.
- Additionally, make sure to synchronize your clock from the time server.
- Turn on Set time zone automatically.
3. Update Windows
If in case, you haven’t updated your Windows OS build for a while that means somehow your outdated Windows OS build is triggering multiple issues with the connectivity and performance. So, you should keep up-to-date your Windows system periodically. To do that:
- Press Windows + I keys to open Windows Settings.
- Click on Update & Security > Click on Check for Updates from Windows Update.
- If there is an update available, select Download and Install.
- Once done, make sure to restart your computer to apply changes.
4. Power Cycle Wi-Fi Router
Try performing the power cycle to your Wi-Fi router if you’re only using Wi-Fi. It basically ensures that your router doesn’t have any kind of glitch or cache issues. In that sense, you should be able to use your internet properly if you’re getting Network Connection Issues on Windows 10. To do this:
- Turn off the router first > Let LED indicators turn off completely.
- Now, disconnect the power cable from the router.
- Wait for around 30 seconds and connect the power cable again.
- Finally, turn on the router > Connect to the internet and check for the issue.
5. Flush DNS Cache
By flushing the DNS cache on your Windows 10 computer, you can easily clear all older or invalid cache entries and the system fetches new combinations & store them in the local cache again. To do that:
- Press Windows + R keys to open the Run dialog box.
- Type cmd and hit Enter to open the Command Prompt. [If prompted by UAC, click on Yes to allow the permission]
- Now, input the following command and hit Enter to remove the current IP address:
ipconfig /release
- Next, type the following command and press Enter again to request a new IP address from DHCP:
ipconfig /renew
- Once done, execute the following command to refresh IP entries on your computer:
ipconfig /flushdns
- You’re done. Close the command prompt and reboot your PC.
6. Reset Windows Sockets
Netsh is a command-line utility tool that helps users to restore network connectivity on Windows 10. Whereas ‘Winsock’ actually stands for ‘Windows Sockets’. Winsock is a set of files that allow Windows programs to connect to the Internet and other computers easily. If you are also receiving the ‘ERR_CONNECTION_RESET’ error on Chrome or Microsoft Edge, this will fix it.
You can also say that Winsock is an ‘Application Programming Interface (API)’ that can be used by developers to make their programs network-enabled. It’s also worth mentioning that 16-bit applications use WINSOCK files. To reset it:
- Press Windows + R keys to open the Run dialog box.
- Type cmd and hit Enter to open the Command Prompt. [If prompted by UAC, click on Yes to allow the permission]
- Now, input the following command and hit Enter to reset the full network stack on your PC:
netsh winsock reset
- Once done, restart your computer to apply changes.
- Finally, check whether Network Connection Issues on Windows 10 are happening or not.
7. Check IP Ping Status
Still, getting the same kind of issues, you should check your IP ping status on your computer by following the steps below. Ping isn’t any kind of troubleshoot resolver. It only tells you whether your network has a stable ongoing connection or not. It also tells you the response timing, network blocking, etc.
- Click on the Start Menu > Type Network Status and open it from the search result.
- Now, go to Properties from which connection you’re using.
- Scroll down to the bottom and see IPv4 Address.
- This is your IP address on your computer that you’re looking for. Note it down on somewhere else.
- Next, press Windows + R keys to open the Run dialog box.
- Type cmd and hit Enter to open the Command Prompt. [If prompted by UAC, click on Yes to allow the permission]
- Now, input the following command and hit Enter to check and verify if TCP/IP is installed and configured correctly or not. [It’ll look like ping 198.128.1.0 but the numbers can vary]
ping your IPv4 address
- If in case, you’re getting a ‘Connection failed’ response that means you’ll have to reset the whole network configuration by following the reset Windows sockets method again from above.
- But if you’re receiving an uninterrupted ping response continuously then you can proceed to the next method.
8. Run Internet Connection Troubleshooter
If you’re sure enough that there are no possible issues with your internet connection because you’re able to browse online and do other internet-related works on other computers or mobile devices then you should run the internet connection troubleshooter on your PC to check for it. Windows default troubleshooters can try fixing the issues automatically in most cases.
- Press Windows + I keys to open Windows Settings.
- Now, click on Update & Security > Click on Troubleshoot from the left pane.
- Click on Additional troubleshooter from the right pane window.
- Then locate Internet Connections from the list and click on it.
- Select Run the troubleshooter and wait for the process to complete.
- Make sure to do the same steps for Incoming Connections and Network Adapter too. [You’ll find them on the same page]
- Once done, make sure to restart your computer to apply changes.
9. Reset Network Settings
However, if none of the methods worked for you, try performing the factory reset of your network settings on the Windows 10 computer to set the factory defaults. In most cases, this method should work for everyone. Please keep in mind that you’ll need to set or connect to the respective network again after the factory reset. To do so:
- Press Windows + I keys to open Windows Settings.
- Go to Network & Internet > Scroll down the Status page to the bottom.
- Click on Network reset > Click on the Reset now button.
- Wait for the process to complete. Once done, your PC will reboot automatically.
That’s it, guys. We hope this guide was helpful to you. If you’ve any further queries, let us know in the comment below.