Fix: Philips Smart TV Not Turning On

Did you find that your Philips smart TV is not turning on since the last OS update? If so, you are not the only one getting this issue. Several users have reported this problem in the Philips community. However, the good news is that the developers know about this problem and assured the users that they would let users fix this soon at their nearest service center (terms & conditions applied).

But, until they do something, how can you try resolving this problem from your side? Well, don’t worry, that’s why we are here. This guide will help you resolve the Philips Smart TV not turning on issue. So, if you are facing this problem with your Philips smart TV, make sure to perform these fixes. 

Why is Philips Smart TV Not Turning On?

You may be experiencing a software or hardware problem with your Philips Smart TV. An improper software update may cause the problem. Your Philips Smart TV might have been updated in a faulty manner because of a new software update. Now let’s look at possible troubleshooting tips to resolve the not turning on problem with your Philips smart TV.

How To Fix Philips Smart TV Not Turning On Issue

Well, don’t worry! We have some fixes to resolve the Philips Smart TV not turning on issue. You just have to perform these simple tricks that we are going to tell you further in this article.

Fix 1: Restart TV

It is possible that some cache files on your device have been corrupted. That’s why you’re experiencing this issue.

You must delete the files in order to fix this problem; however, restarting your Philips TV isn’t enough; you must power cycle it. You should then unplug all the TV cables and turn the TV off. Make sure the cables are disconnected for 30 to 40 seconds before reconnecting them. Check whether the Philips TV is turned on or not.

Fix 2: Check The Power Supply

Check the power supply first if you are having trouble turning on your Philips Smart TV. Ensure that the power source is properly connected. Make sure your voltage supply is working if you have not made a mistake with the plugging in. At least 5V should be available from the PSU’s standby output. You should also check that your power plug and power cable are in good condition.

Fix 3: Connect to a New Power Source

The Philips Smart TV can be connected to another power source if that doesn’t work. Having a Philips Smart TV that turns on means that there was an issue with the power source. It might be an issue with your remote or your TV if it won’t turn on.

Fix 4: Power Recycle on the Philips Smart TV

Power Recycle your Philips smart TV is also another good option to fix the not turning on issue. Also, there are many Philips smart TV owners who reported that this helped them to resolve it the TV won’t turn on:

1. Connect the power cord to the power source of the Philips Smart TV and remove it.
2. Wait at least a minute without the power cord.
3. After that, hold down the Power button for 10-15 seconds on your Philips Smart TV.
4. Then, plug back the power plug into the power source.

Fix 5: Check the Remote

Check the Philips TV remote to make sure it is working properly. The Philips TV remote may not work properly if its power button is damaged or it runs out of batteries. If the remote doesn’t work, try resetting it.

1. Make sure your remote is battery-free, then press and hold the Power button for 15 seconds.
2. Then, insert the batteries into your remote control.
3. Using your remote, you can check if your TV will turn on.

Fix 6: Remove All External Devices

Any external device connected to your Philips Smart TV needs to be disconnected. There is a possibility that any external device on your Philips Smart TV could cause issues with it. Connected external devices should be powered off before being powered back on after disconnecting. Then, check whether the Philips TV is not turning on issue gets resolved. 

Fix 7: Reset The Remote

You may need to replace your remote if you find that the Philips Smart TV is not turning on. It may be disconnected from the television, causing the TV not to connect to your remote. The problem can be fixed by resetting the remote control. In case you are unfamiliar with the process, you should follow these steps:

1. Initially, hold down the Menu button for a minimum of 10 seconds until the screen goes blank.
2. After you release the button, your remote will automatically return to its factory default settings. 
3. That’s it. Using the remote, check if the problem has been resolved. If the error persists, try the above steps again. 

Fix 8: Make Sure The HDMI Cable is Working

Do you know whether your HDMI cable is properly connected to your Philips TV? There is a possibility that this type of issue arises due to a damaged HDMI cable in some cases. The HDMI cable should be thoroughly examined to ensure there are no damages. It may also be worth replacing any damaged cables with new ones to see if the problem is resolved.

Fix 9: Update Your TV OS

A TV operating system from an older generation could also be the reason why you are getting the Philips smart TV not turning on issue. Check your Philips smart TV’s Android version using the Philips website and flash it manually and then check if it starts working or not.

Fix 10: Contact To Service Center

So, if the tricks listed earlier in this article cannot fix Philips smart TV not turning on problem, you must try contacting Philips’ support team because it is your only option in this case. It is possible that Philips may be able to help you resolve this annoying problem further.

So, that’s it on how to fix Philips Smart TV not turning on issue. We hope that you find this guide helpful. Meanwhile, comment below and let us know if you have any other doubts or queries.

So, that’s how to fix the Philips Smart TV not turning on issue. We hope that you find this guide helpful. Meanwhile, comment below and let us know which method worked for you.