It is heart-breaking if the Poco M4 and M4 Pro 5G you bought with your hard-earned money don’t turn on. After going through the various forums including Mi Community, I found out that there are many complaints about Poco M4 and M4 Pro 5G not turning on issues wherein your phone simply shows a black screen or is stuck on the MIUI logo or elsewhere. This isn’t a particularly serious problem unless it is because of a hardware issue since software issues can be dealt with easily but not hardware ones. Here’s a troubleshooting guide on how to fix Poco M4 and M4 Pro 5G not turning on.
Fix: POCO M4 and M4 Pro 5G Bluetooth Problem
How to Root Xiaomi POCO M4 5G using Magisk without TWRP
How to Install Custom ROM on Poco M4 Pro 5G [GSI build]
Fix: POCO M4 and M4 Pro 5G Black Screen Problem | How to Fix?
Best Call Recording App for Poco M4 and M4 Pro 5G
Fix: Poco M4 and M4 Pro 5G Overheating Issue | Gets Warm Quickly
Restart the phone
I am quite sure the majority of you must’ve done it but I am putting it anyway for other readers. Since you are getting a black screen or the display is stuck on the MIUI logo and isn’t budging, try pressing the power button for a few seconds. See if that makes any difference.
Do a forced reboot
If simply pressing the power button doesn’t budge the system from its black screen state, it’s time for a forced reboot. You need a combination of buttons to trigger it. In the case of the Poco M4 and M4 Pro 5G, it is a volume down plus power button for the Poco M4 and M4 Pro 5G. You need to press both the buttons simultaneously until the phone vibrates. Check if the phone turns on or not.
Reboot using recovery mode
You can use the recovery mode on your device to turn on the device if it doesn’t work using the reboot or forced reboot method. Here’s how it works.
- Enter the recovery mode using the power plus volume up buttons pressed simultaneously for 15-20 seconds. Release only when the recovery mode menu appears.
- Next, press the power button once. This will automatically select “Reboot system now”.
There’s a chance that the phone is doing fine, however, the power button is either jammed or broken in the power off position. Pressing a broken power button may not trigger a reboot and you will have to use ADB tools to fire the system and boot it up. Reach out to a technician to get the power button replaced.
Charge the battery & reboot
This works if the battery has drained after frequently rebooting the device. Plugin the charger and let the device charge for 20-30 minutes. Now, press the power button and see if it turns on or not.
Remove the battery and insert it
There are still some smartphone models that use a removable battery (not Poco M4 and M4 Pro 5G). in case you are following this troubleshooting guide for any phone with a removable battery, you can remove it. Wait for a few seconds and insert the battery. Check if the phone turns on now or not.
Do a factory reset
I am talking about torching off all the data stored on your phone including apps, settings, and others. This will get rid of all the data stored and give you a phone just as you purchased it ready for setup. Take a backup of the data beforehand. This could work if there was a software-related issue causing Poco M4 and M4 Pro 5G not to turn on. If it was because of a hardware issue, check out the next option mentioned below. Here’s how you can factory restore your Poco M4 and M4 Pro 5G using Recovery Mode(difficulty level: moderate).
- Press the Power plus Volume Up buttons together for a few seconds and release the buttons only when the phone vibrates and you see a Mi logo.
- Use the power button for selection and the volume rocker for going up and down through the options.
- Select “Wipe data/ factory reset”.
- Select “Yes — delete all data” and the process will commence
- You’ll have to set up the device after a reboot.
- Monitor the performance and check if the display ever goes black or it stops the phone stops turning on.
Flash the firmware
This is where you will re-flash the firmware onto your device. If at all the Poco M4 and M4 Pro 5G not turning on was a software issue, this method should work. You’d need an ADB tool that you can download from Google’s developer’s website as well as the firmware from Google or your OEM for the model you are using. Download the required tools and use ADB on your computer to re-flash the firmware. If you can’t or don’t know how to do it, take your phone to someone who knows how to do it. You could end up in a reboot logo or other issues if the flash isn’t done properly.
The final resort
Considering that no amount of work (in case if you followed several methods mentioned above before failing) was able to retrieve the device and it is still unable to turn on, it is likely that the device has a hardware issue. Several components could go wrong and you need a technician to fix the issue either by repairing or replacing the affected component to restore the phone to a perfect working state.
You have options such as either going for a local service center (which is cheaper and speedier) or going for an authorized service center (which can be expensive but slower) where the former voids the warranty. You can walk into any service center as per your preference and get the phone working if at all it is possible.
Buy a new phone
Of course, there’s an option even after you go through the final resort mentioned above. If the Poco M4 and M4 Pro 5G not turning on is a serious issue due to faulty hardware, you will need a new phone. If you have recently bought the phone, you can still get a replacement if contacted within 10 days after the purchase. Note that some devices have a replacement period of 7 days so you will have to hurry.
If your phone is 7 or 10-days old and out of the replacement period, check if your phone’s warranty covers the issue or not. You can get a replacement unit if the warranty covers such defects. Another option is to buy a new phone in case there’s nothing you can’t do with the existing phone facing a dire phone not turning on issue which is often because of fried or defective hardware issues.