Advertisements

How to Fix Random Reboots or Shutdown on Poco X2

Random Reboots and Shutdown are very common with Android smartphones. No matter which company you go for, you will see users complaining about their phones rebooting itself randomly. If your Poco X2 is randomly rebooting then you need to follow this article to troubleshoot and fix the Poco X2 Randomly Rebooting Frequently issue in very simple steps.

There can be a lot of reasons behind this issue like hardware damage – if you’ve recently suffered a cracked screen, this could have affected your device internally or third party apps – using third-party apps can corrupt the software on your device or high CPU frequency – this can be a potential logic board issue.

Poco X2

Possible Reasons Behind the Issue

Android phones can restart for a variety of reasons such as:

  • If you have disabled any system app, your device may restart frequently.
  • Malfunctioning apps may also be a problem.
  • A loose battery can cause it if your device has a removable battery.
  • Your OS may be corrupted.
  • Hardware problems such as a faulty power button may be the reason in rare cases.

Fix Random Reboots or Shutdown on Poco X2

Check for Hardware Damage

If your Poco X2 keeps restarting by itself after it was dropped or hit by a solid object, the most likely cause of the problem is bad hardware. In this case, the best thing that you can visit your local Xiaomi/Poco store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Clear Cache from Recovery Mode

In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:

  • Turn off your phone.
  • Now Press and hold Volume UP key + Power Key  on your Poco device simultaneously for a while
  • Once you see the Poco logo, you can release the button.
  • The phone is now booted in recovery mode
  • Use Volume keys to navigate to the Wipe cache partition option
  • To confirm, you can use the Power button.
  • Restart your phone

Simple Reboot or Forced Reboot

Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Poco but this applies to every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.

Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.

The other way of the reboot is as follows:

  • Press and hold the volume down button first and don’t let go.
  • Press and hold the power key while holding down the volume down button.
  • Keep both keys held down for 15 seconds or more.

If this doesn’t work then head to the next method. Rebooting your device regularly at least once every week can be beneficial.

Advertisements

Install Latest Software Updates

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘My Device’.
  • Then tap on ‘System Update’.
  • Tap on the ‘Check for updates’.
  • If a system update is available, you’ll see the option on the screen. Tap Download and Install.
  • If your system is up to date, you will see a message stating that the system is up to date.

Here are a few things that are needed to take care while updating your Poco X2 or any device:

  • Your device must be connected to the internet.
  • Your device must have enough space to download the update.
  • Your device should have enough charge, more than 50% to install the update.

Troubleshoot apps in Safe Mode

In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:

  • Your device must be powered on.
  • Press the power button on the phone.
  • When the power off, restart, airplane mode, wifi mode, etc. menu will be displayed, release the power button.
  • Now, long-press the Power OFF word on the screen.
  • Keep pressing this word until the Android Safe Mode message is being displayed on your phone.
  • Select to reboot into Android Safe Mode.
  • When done, a dedicated Safe Mode watermark will be displayed on your smartphone
  • Observe the phone and check for the problem.

After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):

Advertisements
  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘Apps’.
  • Now, tap on ‘Manage Apps’
  • If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
  • Tap ‘Show All Apps’.
  • Find and tap the appropriate app.
  • Tap Uninstall.
  • Tap OK to confirm.

Factory Reset

Disclaimer

Factory reset will delete everything, so you want to make sure that you create a copy of your data such as photos, videos, documents, texts, etc. ahead of time.

From the Settings menu:

  • Open ‘Settings’ from either the Quick Nav menu or the launcher.
  • Scroll Down and Tap ‘My Device’.
  • Now again scroll down and tap ‘Backup & Reset’.
  • Now finally scroll till the end and tap ‘Erase all data (Factory Reset)’.
  • Now, tap on the ‘Delete all data’ button that is located at the center bottom of the screen.
  • Now, it will ask for your lock screen password, confirm it.
  • Again it will ask your Mi account password.
  • Enter the password and tap the Ok button.

From Recovery:

  • Turn off the device
  • Press and hold Volume Up key + Power Key
  • Release Power key when POCO logo appears but keep pressing Volume Up key
  • Release Volume Up key when Mi-Recovery Appears
  • Use Volume keys to select and Power key to confirm
  • Select Wipe Data and press power key to confirm
  • Select wipe all data and press power key to confirm
  • Select Confirm press power key to confirm
  • Select “back to main menu” by press power key
  • Select Reboot and press power key to confirm
  • Select Reboot to System and press the power key to confirm.

Conclusion

That was it, this was the easiest way to Fix Random Reboots or Shutdown on Poco X2. Follow them carefully to get benefits of the feature in your Poco X2. Are you facing any problems and issues with your Poco X2? Then there is nothing to worry about, we have an article dedicated to Poco X2’s issues and guides. Here is the Poco X2 Troubleshooting Guide. Although it’s rare, some cases of the issues on Poco devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Mi Store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Do you own a Poco Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Poco are coming soon.

If you have any queries regarding this, the comment section always available for you.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.