Realme X50m 5G Software Update | RMX2141_11.A.12 (November 2020)

Updated on November 22, 2020: Today Realme in China rolled the latest update with version RMX2141_11_A.12. This update brings  The update comes November 2020 security patch, camera optimization, and other regular bug fixes.

Back on April 23, Realme has unveiled its new 5G smartphone in China. It is named as Realme X50m 5G and is the cheapest 5G smartphone from the brand. It sports 6.57″ display with 120Hz refresh rate, 6/8GB RAM, 128GB storage, quad rear cameras, 4200mAh battery, and runs on Android 10. If you’re using this handset and want to upgrade or install the stock firmware, then this article is for you. Here you can get the list of Realme X50m 5G Software Update Tracker and Download links as well.

If you’re using the Realme X50m 5G handset and didn’t receive the OTA update notification yet for a while, then you should check it manually. For your info, the latest software update version of RMX2141_11.A.05 brings the April 2020 patch to the device with other system improvements. Whereas, the one more previous update was also brought a security patch level to the device. Now, before going to the software update list, take a look at the device specifications.

Realme X50m 5G Overview

The Realme X50m 5G sports a 6.57 inches IPS LCD display with a screen refresh rate of 120Hz, and a Full HD+ resolution. It has an aspect ratio of 20:9 and a screen to body ratio of 84.8 percent, a pixel density of 399 Pixel Per Inch (PPI), a dual punch hole to the left, and a resolution of 1080 x 2400 pixels. Coming to the internals of the Realme X50m 5G, it sports the Qualcomm Snapdragon 765G SoC, which is built on the 7nm process. This octa-core setup includes one Kryo 475 Prime core, one Kryo 475 Gold core, and six Kryo 475 silver cores. To the GPU side, it sports the Adreno 620 GPU. Talking about the memory side, it comes with 6, and 8GB of RAM. And only with 128GB of UFS 2.1 onboard storage. Further, this is not expandable via the micro SD card. The device runs on the Realme UI V1.0 that is based on Android 10.

Talking about the camera, the Realme X50m 5G sports a quad rear camera setup. The quad rear camera includes a primary 48MP sensor with an aperture value of f/1.8 and PDAF. This sensor pairs with an 8MP ultra wide-angle sensor with an aperture value of f/2.2, and a tertiary 2MP macro sensor with an aperture value of f/2.4. And finally, this setup also includes a 2MP depth sensor with an aperture value of f/2.4. To the front, it has two sensors, which include a primary 16MP sensor with an aperture value of f/2.0, which is coupled with a 2MP depth sensor with an aperture value of f/2.4.

The Realme X50m 5G packs a 4,200mAh battery with support for 30W VOOC 4.0 Flash Charge support. The company claims to charge the phone up to 70 percent in just 30 minutes. It is available in two color options, i.e., in Starry Blue, and Galaxy White. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, GPS with A-GPS, GLONASS, BDS, NFC, and USB 2.0, Type-C 1.0 reversible connector. Sensors onboard include accelerometer, gyro, proximity, and compass. It gets a side-mounted fingerprint scanner, and also support for face unlock. The pricing starts at 1,999 Yuan for the 6/128GB variant, and at 2,299 Yuan for the 8/128GB variant.

Advertisements

Realme X50m 5G Software Update Tracker

Here we will keep updating the latest software versions along with changelog whenever a new official firmware update will be available for the Realme X50m 5G model.

Software Version Changelog
RMX2141_11_A.12

China ROM: Download Link

  • Security
    • Update Android security patch (2020#11)
  • Flashlight
    • Added the function of turning off the flashlight by short pressing the power button in the screen state
  • Camera
    • Optimize the sharpness of zoom photos and improve imaging performance
  • Dark mode
    • Fix the problem of low probability screen flickering when entering the codebook in dark mode
    • Fixed the problem that the switch state is not synchronized from sunrise to sunset after using the mobile phone to move in the dark mode
  • Photo album
    • Fix the problem of low probability loss of album memories and newly deleted data
  • Super power saving
    • Fixed the issue of crashing with extremely low probability when opening Huantai Mall in super power saving mode
  • Bluetooth
    • Fix the problem that the Bluetooth headset is disconnected and reconnected, there is a very low probability that the call is silent
  • Phone Guardian
    • Fix the issue that the phone housekeeper crashes at a very low probability during language switching
  • Sidebar
    • Fix the problem of low probability of crashing when launching the QQ floating window in the sidebar and clicking the QQ back button
RMX2141_11.A.07

China ROM: Download Link

  • application
    • Add realme Link application
  • Bluetooth
    • Added realme Bluetooth headset (Air and Neo) connection popup prompt (need to update headset firmware in realme Link) function
  • camera
    • Optimize camera effects and enhance the photo experience
  • Safety
    • Update Android security patch (2020#6)
RMX2141_11.A.06

China ROM: Download Link

  • Optimize network performance and improve Internet stability
    camera
  • Added rear slow-motion 120FPS function
  • Optimize camera effects and enhance the photo experience
    optimization
  • Optimize the problem of excessive power consumption in some scenarios
    repair
    ● Fixed the prompt that “mobile phone screen is connected to null” in the status bar in some scenarios
RMX2141_11.A.05
China ROM: Download Link
  • Optimize
    • Optimize network performance and improve Internet stability
    • Optimize camera effects and enhance the photo experience
RMX2141_11.A.04

China ROM: Download Link

  • Network
    • Optimize network performance and improve Internet stability
  • Camera
    • Optimize the camera effect and enhance the photo experience

How to Check Software Update on Realme X50m 5G

Make sure to connect your device to a Wi-Fi network and charge the phone up to 50% at least. If a new software update is available, the system will automatically show a notification on the ‘System updates’ icon.

Otherwise, you can check the OTA update manually by going to the Settings menu on your device > tap on System updates. If the latest update is available, then download the firmware by following on-screen instructions. Once done, your device will reboot into a new system version.

That’s it, guys. We hope you’ve found this article useful. For any queries, let us know in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.