In this article, we’ll show you the options that you can do to fix the Wet Speaker Problem on Galaxy S20 in straightforward steps.
“Wet Speaker Problem” is an unusual error that is not usually expected in an IP68 rated smartphone like Samsung Galaxy S20. But if you are facing the Wet Speaker Problem in your Samsung Galaxy S20a then follow this article for the fix.
Page Contents
Fix, Wet Speaker Problem on Galaxy S20
Dry the Phone
No doubt this is the first and obvious solution for this type of problem. Galaxy S20 is water-resistant by design so unless the protection has been compromised before you exposed it to water, there’s no danger of water damaging the speaker. Continue drying the phone by wiping the speaker area with a clean, soft cloth and shaking it smoothly a few times. Using cool wind is also recommended to hasten the drying process. Make sure to hold the speaker face down while shaking the device and exposing it to wind or fan.
Dislodge Excess Water with Vibration
If you still have the wet speaker issue, try calling on your Galaxy S20 with another phone, if you don’t have one then borrow from your friends, so vibration will dislodge water particles from the speaker mesh. Try to make your call as long as 10 minutes in order to give vibration a long time to work the water out.
Simple Reboot or Forced reboot
Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Galaxy but this applies to each and every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.
Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.
The other way of the reboot is as follows:
- Press and hold the Volume Down button.
- While holding it down, press and hold the Power key.
- Keep the button held for 10 seconds, it will be restarted automatically.
If this doesn’t work then head to the next method.
Rebooting your device regularly at least once every week can be beneficial. If you tend to forget things, we suggest that you configure your phone to reboot on its own. You can schedule it to do this task by doing these steps:
- Open the Settings app.
- Tap Device Care.
- Tap the 3-dot at the top.
- Select Auto restart.
Clear Cache from Recovery Mode
In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume button to go to Wipe Cache Partition then press the Power button to confirm the selection.
- Wait until your device wipes out all cache or temporary data from the system partition.
- Press the Power button again to reboot the device.
This clears all the temporary data from the device. And then it works like new.
Troubleshoot apps in Safe Mode
In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:
- Turn OFF the device.
- Press and hold your device’s Power button till the model name screen.
- When the SAMSUNG logo appears on the screen, release the Power key.
- Immediately after releasing the Power key, press and hold the Volume down key.
- Continue to hold the Volume down key until the device finishes restarting.
- Safe mode will display in the bottom left corner of the screen.
- Release the Volume down key when you see Safe Mode.
After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):
- Open Settings from Launcher.
- Tap on Apps.
- Tap See All Apps.
- Tap an app that you want to uninstall
- Tap Uninstall.
- Tap OK to confirm.
Reset app preferences
- Open the Settings from the launcher.
- Tap Apps.
- Tap on More settings at the upper right (three-dot icon).
- Select Reset app preferences.
- Restart your Galaxy and check for the problem.
Update apps and system software
To check for Play Store app updates on your Galaxy:
- Open Play Store app.
- Tap More settings icon at the upper left (three horizontal lines).
- Tap My apps & games.
- Tap Update or Update All.
If you are on Cellular Data connection, we suggest that you update via wifi only to avoid additional charges. Here’s how:
- Open Play Store app.
- Tap More settings icon at the upper left (three horizontal lines).
- Tap Settings.
- Tap App download preference.
- Select Over wifi only (select Over any network if you don’t have wifi).
- Tap Done.
Follow the below steps to update system software:
- Open Settings from either Quick Nav menu or the launcher.
- Go to the More tab, then tap on About device.
- Tap on the Software update.
- If a system update is available, you’ll see the option on the screen. Tap Download and Install.
- If your system is up to date, you will see a message stating that the system is up to date.
That is all. You have successfully checked for a system update on your Samsung Galaxy S20 (Plus) and S20 Ultra.
Here are a few things that are needed to take care while updating your Samsung Galaxy S20 (Plus) and S20 Ultra or any device:
- Your device must be connected to the internet.
- Your device must have enough space to download the update.
- Your device should have enough charge, more than 50% to install the update.
Factory Reset
Disclaimer
- Open the Settings from the launcher.
- Scroll to and tap General management.
- Tap Reset.
- Select Factory data reset.
- Tap Reset to continue.
- Tap Delete All to confirm the action.
From Recovery:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
- Press the Power button to select ‘Wipe data/factory reset.’
- Use Volume Down to highlight Yes.
- Press the Power button to confirm the action to clear your phone data.
Visit the Service Centre
Although it’s rare, some cases of the issues on Samsung Galaxy devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Samsung store or Service Center so a qualified Samsung technician can examine the hardware. If needed, they may send it in for repair or replacement.
Do you own a Galaxy Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Galaxy are coming soon.
If you have any queries regarding this, the comment section always available for you.
- After Update, My Galaxy S20 Gmail Crashing randomly: How to Fix?
- After the Galaxy S20 update, Facebook/Instagram app is crashing: How to Fix?
- How to Manage Contacts on Galaxy S20, S20+ or S20 Ultra
- My Galaxy S20 Plus getting warm very quickly: How to Fix Overheating issue?
- After Update, My Galaxy S20 Showing System UI Error: How to Fix?