Fix: Xiaomi Poco F4 GT Bluetooth Problem

In this tutorial, we will guide you on how to fix the Bluetooth connectivity or not pairing problem on the Poco F4 GT. The device was launched globally, a rebranded version of the Redmi K50 Gaming Edition handset that was launched in China earlier this year. The smartphone features a 6.67-inch full-HD+ AMOLED display, powered by a Qualcomm Snapdragon 8 Gen 1 SoC, and offers up to 12GB of LPDDR5 RAM with the phone.

Transferring data over Bluetooth is slow, but that isn’t its only application. As smartphones are getting rid of the headphone jack, Bluetooth-paired wireless headphones are a craze; and the Poco F4 GT does the same. In any case, we got a tonne of questions on Poco F4 GT Bluetooth problems that users are facing, and there are too many.

We accounted for most of the issues and tried troubleshooting methods that you can use to fix the Poco F4 GT Bluetooth problems in a few minutes. Of course, this guide can be used to fix Bluetooth problems and issues on all Android devices.

Fix: Xiaomi Poco F4 GT Bluetooth Problem

Poco F4 GT Device Overview:

The Poco F4 GT features a 6.67 inches AMOLED panel with a 120 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. We get Gorilla Glass Victus protection at the front of the device. Under the hood, we get the Qualcomm Snapdragon 8 Gen 1 processor built on a 4 nm manufacturing process. It is an octa-core processor with one Cortex X2 core clocked at 3.0 GHz, three Cortex-A710 cores clocked at 2.5 GHz and four Cortex-A510 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 730. The smartphone comes with Android 12 out of the box with MIUI 13 skin running on top of it.

In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 64MP primary sensor paired with an f/1.9 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, and a 2MP macro sensor paired with an f/2.4 lens. The selfie camera at the front is a 20MP primary sensor paired with an f/2.4 lens. The rear camera system can capture 4K videos at 60 fps, while the front camera is limited to 1080p video recording at 60 fps.

The smartphone comes with two storage options: 128GB internal storage + 8GB RAM and 256GB internal storage + 12GB RAM. We also do not get a MicroSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.2, GPS, NFC, Infrared port, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, compass, and color spectrum. Powering it all is a 4,700 mAh battery that can be topped up quickly using a 120W power adapter. The company claims that the smartphone can go from 0 to 100 in just 17 mins. The smartphone is available in three color options: Stealth Black, Knight Silver, and Cyber Yellow.

How To Fix Poco F4 GT Bluetooth Problem?

In Some Poco F4 GT smartphones, users report that they cannot pair with any smartphone, sometimes Bluetooth disconnects, audio distortion in Bluetooth headsets, Bluetooth not working, and more. If you are someone who is facing any Bluetooth issues on your Poco F4 GT, then try these troubleshooting tips.

Restart the phone

Software glitches are a thing, and there’s no denying it. It could trigger at any time, and that is why sometimes even a flagship phone tends to stutter a bit. Talking about Poco F4 GT Bluetooth Problem, it is possible that when you tried to connect to a Bluetooth device, the software intercepted a bug or error causing issues like not being able to connect or transferring issues or even as early as not being able to detect a Bluetooth device.

Restarting the phone is a swiss army knife of Bluetooth troubleshooting methods as it tends to fix a string of issues, and you’ll have to do it. Try doing the same for the recipient or sender device too.

Toggle Bluetooth Connectivity

Assuming that you were able to connect to a Bluetooth device, if the phone rejected the connection or you weren’t able to discover the said device, why not try toggling the Bluetooth connection. Bring down the Notification Panel and double tap on the ‘Bluetooth’ tile to disable and enable it. You can do it a few times just in case.

Toggle Airplane Mode

Just like any other connectivity-linked issue, Airplane Mode could interfere with Bluetooth connectivity, causing the system to fail to register to a Bluetooth device or slow transferring issues over Bluetooth. Simply go to the Notification Panel and tap twice (or in pairs) to toggle airplane mode or flight mode. This should enable and disable the airplane mode (that’s why in pairs). Check if the issue has been fixed or not.

Set Your Phone’s Bluetooth To ‘Discoverable’

Some smartphones have a feature called “Discoverable” or its synonym that, only when enabled does the other device discover your device. If you forget to make your device discoverable, no amount of toggling Bluetooth or Airplane Mode or any of the methods listed here won’t work. The recipient device won’t be able to detect your device, so there’s nothing you can do until you enable it.

Distance Matters

Some users would connect to a Bluetooth device and travel far from each other, thinking it will work. Bluetooth devices have a range, and just like Wi-Fi, as you draw farther from the other device, the network strength grows weaker. This could cause a slow transferring rate or abrupt disconnection (or/and connection in a loop).

Remove older connections

My Sennheiser wireless earphones continue to pair up with my PC when I turn it ON to watch a movie on my phone. This is because the earphones were paired on both the devices, and depending upon which device intercepts it first and other metrics, it connects to the laptop instead of my phone.

The simple fix is to unpair the unwanted device (e.g., laptop, in this case) and pair it up with the phone. Based on which device you are trying to connect over Bluetooth (speakers, accessories, smartphones, etc.), you could have multiple connections, so this trick would work.

Forget and Pair

One of the common Poco F4 GT Bluetooth problems is probably not being able to connect to a Bluetooth device that you have previously connected with. Here, you can use a trick called forget and repair. For this to work, you need to forget the Bluetooth device and pair again, and there’s a greater chance that the bug would subside.
Step 01: First up, go to Settings >> Bluetooth >> Connected Devices.
Step 02: Find the network you want to forget. Since you tried connecting to the said network, it should be under the “Discovered/Paired” section.
Step 03: Long-press or tap on the gear icon against the said network and tap on ‘Forget Device’. Note that the procedure for this step could differ from phone to phone.
Step 04: Now that you have successfully forgotten the network, connect it as usual and check if the problem has been sorted or not.

Clear Bluetooth Cache

Cache on an Android smartphone is both a boon and a curse in some cases. Regarding Bluetooth issues, cache built-in can interfere with working on Bluetooth on Poco F4 GT. Deleting the Bluetooth cache can resolve the problem at once.
To clear Bluetooth Cache, here’s how you can do it.
Step 01: Go to Settings on your phone and proceed to “Apps & Notifications.”
Step 02: Tap on the 3-dot icon on top to see “System apps” and search for “Bluetooth”. Tap on it when you find it.
Step 03: Go to “Storage & Cache” and clear it. This should help fix the impending Poco F4 GT Bluetooth Problem.

Reset Bluetooth Settings

How To Fix POCO M3 Pro 5G Wi-Fi Problem

It is quite possible that some settings have gone haywire and that is where resetting it works. This will restore the network settings to factory settings and hopefully, it will fix the problem as well.
Step 01: Navigate to the Settings app on your phone and proceed to “Connection & Sharing”.
Step 02: Next up, select “Reset Wi-Fi, mobile networks, and Bluetooth”.
Step 03: Finally, click on “Reset Settings” and that should restore settings related to Bluetooth, Mobile Data, and Wi-Fi alike.

Incompatible Driver

If you are trying to connect the phone to the PC via Bluetooth, an incompatible driver can hamper the connection. It is recommended to update the Bluetooth driver on your PC to test if this method worked or not.

Update the OS

Incompatible software on the smartphone’s front can cause Bluetooth to suffer wrath. If you are facing this Bluetooth problem on Poco F4 GT (or any other smartphone), update its software and check if the problem works or not.

Pull Off a Factory Reset

How To Fix POCO M3 Pro 5G Wi-Fi Problem

This is the last resort but you should know that doing so will technically remove all the data from your phone permanently. Take a backup if you consent to it and proceed. You can use the phone’s Settings app to commence, proceed “About Phone >> Factory Reset” and select “Erase All Data” and it is done. Set up the device as a new one and check if the Bluetooth issue has been fixed or not.

Still facing Bluetooth problems on Poco F4 GT?

Although I am not certain that you are facing this issue, assuming that you have followed the troubleshooting guide mentioned above to fail to start Bluetooth, your phone will likely have a hardware issue. The Bluetooth system on your phone has hardware aka chip and it might be facing issues. You have two options. Either walk into a third-party service center (and void warranty, if any, but cheaper) or an authorized service center (warranty stays intact but could be expensive).

We are at the end of this troubleshooting guide on how to fix the Poco F4 GT Bluetooth Problem. Hopefully, Bluetooth on your phone has started working properly irrespective of the issue it had including ‘Bluetooth not connecting’, ‘Bluetooth disconnecting’, ‘Bluetooth not detectable’, ‘transferring data is slow on Bluetooth’, and others.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.