Xiaomi Redmi 9T Test Point | EDL Mode 9008 | ISP EMMC PinOUT

In this guide, we will show you the real image of the ISP pinout and test point for the Xiaomi Redmi 9T (Lime). By using the ISP PinOUT, you can easily restore the stock ROM, bypass FRP lock, or reset user data on your device via UFi Box. In this guide, we will also guide you on how to reboot into 9008 EDL Mode.

Xiaomi Redmi 9T Device Overview:

Xiaomi Redmi 9T Test Point | EDL Mode 9008 | ISP EMMC PinOUT

The Xiaomi Redmi 9T features a 6.53 inch IPS LCD panel with a resolution of 1080 x 2340 pixels. The display goes all the way up to 400 nits, and it is protected by Corning Gorilla Glass 3. The processor inside the smartphone is the Qualcomm Snapdragon 662 which is built on an 11nm manufacturing process. This is a year-old processor designed for mid-range devices, and Xiaomi is definitely looking to cut some corners in terms of price by included an old processor with this smartphone. It is an octa-core processor with four Kryo 260 Gold cores clocked at 2.0 GHz and four Kryo 260 Silver cores clocked at 1.8 GHz.

In terms of camera, we get a quad-camera setup at the rear, and a single low megapixel camera at the front. The quad-camera setup comprises a 48Mp primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. Coming to the front, we only get a signal 8MP sensor paired with an f/2.1 lens. Both the front and the rear setup are only limited to 1080p video recording.

The smartphone runs on Android 10 out of the box with MIUI 12 skin on top of it. There are three storage options for the smartphone: 64GB + 4GB RAM, 128GB + 4GB RAM, and 128GB + 6GB RAM. There is a dedicated slot for microSD expansion too.

In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, Infrared port, FM radio, and USB Type-C 2.0. The battery inside the Redmi 9T is huge, with a capacity of 6,000 mAh. It also supports 18W fast charging and 2.5 reverse wired charging. The smartphone is available in four color options: Carbon Gray, Twilight Blue, Sunrise Orange, and Ocean Green.

What is ISP PinOUT?

ISP or In-system programming also known as in-circuit serial programming (ICSP) for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile, computer. You will find the IS Pinout connection on the logic board of your device. Therefore, you will need to remove the back panel of the handset and follow the below image to locate the pinout.

Xiaomi Redmi 9T ISP Pinout Image:

Xiaomi Redmi 9T Test Point

How to Enter EDL Mode on Xiaomi Redmi 9T (Lime)

Follow this instruction carefully to boot your device into EDL Mode (aka Emergency DownLoad Mode)

Also Read:

What is EDL Mode? How to Enter EDL Mode on Any Qualcomm Device

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Connect your device to your PC
  • Open the adb command and enter the command
    .\adb reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Boot your device into the bootloader
  • Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
  • now enter the command
    .\fastboot oem edl

Method 3: By Hardware Test Points / Restore Your device

  • Download the QDLoader driver
  • Find the EDL PinOUT/Test Point on your device (refer to image above to find the test point)
  • To enter EDL mode, you need to use a metal tweezer or a conductive metal wire to short the points.
  • Once you are done, connect your device to the PC using a USB cable
  • This way, your device will enter EDL mode. Now you can open the QFil or QPST Tool to flash the firmware and restore your device.

I hope this guide was helpful to find the Xiaomi Redmi 9T (Lime) ISP Testpoints.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.