How to Fix Windows BSOD Error 0x00000124

Windows BSOD Error 0x00000124 is normally caused by defective hardware, memory, or even processor due to heat-related issues. Infrequently, this error can be caused due to driver related issues. To remove the BSOD error, you will have to switch off the power and reset all the cards, cables, and memory( on both ends).

Due to this error, the screen will splash when your Windows is booting and will make your system restart automatically. Today, we have an article within which we will show you how to fix the Windows BSOD (blue screen of death) stop error 0×00000124. So without spilling any further, let’s get lighted with our complete guide.

How to Fix Windows BSOD Error 0x00000124

How To Fix Windows BSOD Error 0x00000124?

BSOD errors can turn your computers into a heat machine, so it’s advisable to keep your PC in a cool environment. In case you’re using a laptop, then use the cooling pad. Down below are some troubleshooting methods to help you with the BSOD error.

Method 1: Update Device Drivers

The BSOD error may occur because you have an outmoded or corrupted driver. Drivers play an important role in hardware to work properly, and it is imperative to update your drivers to fix errors like BSOD Error 0x00000124.

Method 2: Open The Blue Screen Troubleshooter

If we are talking about troubleshooter, then Windows 10 have numerous troubleshooter that can fix both hardware and software issues and the blue screen troubleshooter is one of them that is used to fix BSOD Error 0x00000124.

Advertisements

To open the Blue Screen Troubleshooter, follow the procedure:

Tap on the Cortana button, and search for the troubleshooter.

Choose Troubleshoot from the list.

How to Fix Windows BSOD Error 0x00000124

Advertisements

Tap on Blue Screen Troubleshooter and click on the Run the troubleshooter button. The troubleshooter will open then and automatically scan.

Method 3: Check For Windows Updates

Windows 10 generally updates itself automatically unless you have turned the update service off, but you can also update the driver manually and to check the update manually, follow the procedure given below:

Go to the start menu, and in the search box, type Windows Updates.

Advertisements

Then, tap on check for updates to open the settings menu.

Click on check for an update to see if an update is available or not.

If any update is available, then select the Install now option to install the new updates.

Method 4: Scan System Files

To scan the whole systems file, you need to follow the method that we given below: –

Advertisement

Search for the command prompt and after that, from the search result, select the Command Prompt by right-clicking on it and then tap on Run as administrator.

Now, in the command prompt window, type sfc/scannow and then press enter.

sfc/scannow

How to Fix Windows BSOD Error 0x00000124

At last, you need just to restart the SFC repairs files.

Method 5: Switch off the C1E Enhanced Halt State Setting

The C1E Enhanced Halt State is a setting found in the BIOS section, and with the help of the C1E enhanced halt state setting, you can easily fix the BSOD Error 0x00000124 issue. Let’s see how you’ll to Switch off the C1E Enhanced Halt State Setting.

  1. Go to BIOS by restarting Windows, and after that, press F2.
  2. Now, tap on the Advanced Chipset Features and CPU configuration option.
  3. Therefore, select the C1E Enhanced Halt State setting, and hit the enter key.
  4. Now you’ll see a disable option to switch off the settings.
  5. After that, press F10 to save the changes.
  6. Now exit the BIOS and restart wind0ws.

Conclusion

BSOD Error can happen anytime so users should always keep a backup of important data along with them. Furthermore, the Windows BSOD Error 0x00000124 is quite easy to fix if you follow the above methods.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.